On Tue, Feb 11, 2020 at 10:50:58PM +0800, Zenghui Yu wrote:
> Hi Drew,
>
> On 2020/2/11 21:37, Andrew Jones wrote:
> > Let's bail out of the wait loop if we see the expected state
> > to save over six seconds of run time. Make sure we wait a bit
> > before reading the registers and double check again after,
> > though, to somewhat mitigate the chance of seeing the expected
> > state by accident.
> >
> > We also take this opportunity to push more IRQ state code to
> > the library.
> >
> > Signed-off-by: Andrew Jones <drjones@xxxxxxxxxx>
>
> [...]
>
> > +
> > +enum gic_irq_state gic_irq_state(int irq)
>
> This is a *generic* name while this function only deals with PPI.
> Maybe we can use something like gic_ppi_state() instead? Or you
> will have to take all interrupt types into account in a single
> function, which is not a easy job I think.
Very good point.
>
> > +{
> > + enum gic_irq_state state;
> > + bool pending = false, active = false;
> > + void *base;
> > +
> > + assert(gic_common_ops);
> > +
> > + switch (gic_version()) {
> > + case 2:
> > + base = gicv2_dist_base();
> > + pending = readl(base + GICD_ISPENDR) & (1 << PPI(irq));
> > + active = readl(base + GICD_ISACTIVER) & (1 << PPI(irq));
> > + break;
> > + case 3:
> > + base = gicv3_sgi_base();
> > + pending = readl(base + GICR_ISPENDR0) & (1 << PPI(irq));
> > + active = readl(base + GICR_ISACTIVER0) & (1 << PPI(irq));
>
> And you may also want to ensure that the 'irq' is valid for PPI().
> Or personally, I'd just use a real PPI number (PPI(info->irq)) as
> the input parameter of this function.
Indeed, if we want to make this a general function we should require
the caller to pass PPI(irq).
>
> > + break;
> > + }
> > +
> > + if (!active && !pending)
> > + state = GIC_IRQ_STATE_INACTIVE;
> > + if (pending)
> > + state = GIC_IRQ_STATE_PENDING;
> > + if (active)
> > + state = GIC_IRQ_STATE_ACTIVE;
> > + if (active && pending)
> > + state = GIC_IRQ_STATE_ACTIVE_PENDING;
> > +
> > + return state;
> > +}
> >
>
> Otherwise,
>
> Reviewed-by: Zenghui Yu <yuzenghui@xxxxxxxxxx>
> Tested-by: Zenghui Yu <yuzenghui@xxxxxxxxxx>
Thanks, but I guess I should squash in changes to make this function more
general. My GIC/SPI skills are weak, so I'm not sure this is right,
especially because the SPI stuff doesn't yet have a user to validate it.
However, if all reviewers think it's correct, then I'll squash it into
the arm/queue branch. I've added Andre and Eric to help review too.
Thanks,
drew
diff --git a/arm/timer.c b/arm/timer.c
index ae5fdbf54b35..44621b4f2967 100644
--- a/arm/timer.c
+++ b/arm/timer.c
@@ -189,9 +189,9 @@ static bool gic_timer_check_state(struct timer_info *info,
/* Wait for up to 1s for the GIC to sample the interrupt. */
for (i = 0; i < 10; i++) {
mdelay(100);
- if (gic_irq_state(info->irq) == expected_state) {
+ if (gic_irq_state(PPI(info->irq)) == expected_state) {
mdelay(100);
- if (gic_irq_state(info->irq) == expected_state)
+ if (gic_irq_state(PPI(info->irq)) == expected_state)
return true;
}
}
diff --git a/lib/arm/gic.c b/lib/arm/gic.c
index 0563b31132c8..3924dd1d1ee6 100644
--- a/lib/arm/gic.c
+++ b/lib/arm/gic.c
@@ -150,22 +150,37 @@ void gic_ipi_send_mask(int irq, const cpumask_t *dest)
enum gic_irq_state gic_irq_state(int irq)
{
enum gic_irq_state state;
- bool pending = false, active = false;
- void *base;
+ void *ispendr, *isactiver;
+ bool pending, active;
assert(gic_common_ops);
switch (gic_version()) {
case 2:
- base = gicv2_dist_base();
- pending = readl(base + GICD_ISPENDR) & (1 << PPI(irq));
- active = readl(base + GICD_ISACTIVER) & (1 << PPI(irq));
+ ispendr = gicv2_dist_base() + GICD_ISPENDR;
+ isactiver = gicv2_dist_base() + GICD_ISACTIVER;
break;
case 3:
- base = gicv3_sgi_base();
- pending = readl(base + GICR_ISPENDR0) & (1 << PPI(irq));
- active = readl(base + GICR_ISACTIVER0) & (1 << PPI(irq));
+ if (irq < GIC_NR_PRIVATE_IRQS) {
+ ispendr = gicv3_sgi_base() + GICR_ISPENDR0;
+ isactiver = gicv3_sgi_base() + GICR_ISACTIVER0;
+ } else {
+ ispendr = gicv3_dist_base() + GICD_ISPENDR;
+ isactiver = gicv3_dist_base() + GICD_ISACTIVER;
+ }
break;
+ default:
+ assert(0);
+ }
+
+ if (irq < GIC_NR_PRIVATE_IRQS) {
+ pending = readl(ispendr) & (1 << irq);
+ active = readl(isactiver) & (1 << irq);
+ } else {
+ int offset = (irq - GIC_FIRST_SPI) / 32;
+ int mask = 1 << ((irq - GIC_FIRST_SPI) % 32);
+ pending = readl(ispendr + offset) & mask;
+ active = readl(isactiver + offset) & mask;
}
if (!active && !pending)
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
