Hi all,
Abbott submitted a v5 about a year ago here:
and the series was not picked up since then, so I rebased it against
v5.2-rc4 and re-tested it on a Brahma-B53 (ARMv8 running AArch32 mode)
and Brahma-B15, both LPAE and test-kasan is consistent with the ARM64
counter part.
We were in a fairly good shape last time with a few different people
having tested it, so I am hoping we can get that included for 5.4 if
everything goes well.
Changelog:
v7 - v7
- add Linus' Tested-by for the following platforms:
Tested systems:
QEMU ARM RealView PBA8
QEMU ARM RealView PBX A9
QEMU ARM Versatile AB
Hardware Integrator CP
Hardware Versatile AB with IB2
- define CONFIG_KASAN_SHADOW_OFFSET
v6 - v5
- Resolve conflicts during rebase, and updated to make use of
kasan_early_shadow_pte instead of kasan_zero_pte
v5 - v4
- Modify Andrey Ryabinin's email address.
v4 - v3
- Remove the fix of type conversion in kasan_cache_create because it has
been fix in the latest version in:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
- Change some Reviewed-by tag into Reported-by tag to avoid misleading.
---Reported by: Marc Zyngier <marc.zyngier@xxxxxxx>
Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Disable instrumentation for arch/arm/mm/physaddr.c
v3 - v2
- Remove this patch: 2 1-byte checks more safer for memory_is_poisoned_16
because a unaligned load/store of 16 bytes is rare on arm, and this
patch is very likely to affect the performance of modern CPUs.
---Acked by: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Fixed some link error which kasan_pmd_populate,kasan_pte_populate and
kasan_pud_populate are in section .meminit.text but the function
kasan_alloc_block which is called by kasan_pmd_populate,
kasan_pte_populate and kasan_pud_populate is in section .init.text. So
we need change kasan_pmd_populate,kasan_pte_populate and
kasan_pud_populate into the section .init.text.
---Reported by: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Fixed some compile error which caused by the wrong access instruction in
arch/arm/kernel/entry-common.S.
---Reported by: kbuild test robot <lkp@xxxxxxxxx>
- Disable instrumentation for arch/arm/kvm/hyp/*.
---Acked by: Marc Zyngier <marc.zyngier@xxxxxxx>
- Update the set of supported architectures in
Documentation/dev-tools/kasan.rst.
---Acked by:Dmitry Vyukov <dvyukov@xxxxxxxxxx>
- The version 2 is tested by:
Florian Fainelli <f.fainelli@xxxxxxxxx> (compile test)
kbuild test robot <lkp@xxxxxxxxx> (compile test)
Joel Stanley <joel@xxxxxxxxx> (on ASPEED ast2500(ARMv5))
v2 - v1
- Fixed some compiling error which happens on changing kernel compression
mode to lzma/xz/lzo/lz4.
---Reported by: Florian Fainelli <f.fainelli@xxxxxxxxx>,
Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Fixed a compiling error cause by some older arm instruction set(armv4t)
don't suppory movw/movt which is reported by kbuild.
- Changed the pte flag from _L_PTE_DEFAULT | L_PTE_DIRTY | L_PTE_XN to
pgprot_val(PAGE_KERNEL).
---Reported by: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Moved Enable KASan patch as the last one.
---Reported by: Florian Fainelli <f.fainelli@xxxxxxxxx>,
Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
- Moved the definitions of cp15 registers from
arch/arm/include/asm/kvm_hyp.h to arch/arm/include/asm/cp15.h.
---Asked by: Mark Rutland <mark.rutland@xxxxxxx>
- Merge the following commits into the commit
Define the virtual space of KASan's shadow region:
1) Define the virtual space of KASan's shadow region;
2) Avoid cleaning the KASan shadow area's mapping table;
3) Add KASan layout;
- Merge the following commits into the commit
Initialize the mapping of KASan shadow memory:
1) Initialize the mapping of KASan shadow memory;
2) Add support arm LPAE;
3) Don't need to map the shadow of KASan's shadow memory;
---Reported by: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
4) Change mapping of kasan_zero_page int readonly.
- The version 1 is tested by Florian Fainelli <f.fainelli@xxxxxxxxx>
on a Cortex-A5 (no LPAE).
Hi,all:
These patches add arch specific code for kernel address sanitizer
(see Documentation/kasan.txt).
1/8 of kernel addresses reserved for shadow memory. There was no
big enough hole for this, so virtual addresses for shadow were
stolen from user space.
At early boot stage the whole shadow region populated with just
one physical page (kasan_zero_page). Later, this page reused
as readonly zero shadow for some memory that KASan currently
don't track (vmalloc).
After mapping the physical memory, pages for shadow memory are
allocated and mapped.
KASan's stack instrumentation significantly increases stack's
consumption, so CONFIG_KASAN doubles THREAD_SIZE.
Functions like memset/memmove/memcpy do a lot of memory accesses.
If bad pointer passed to one of these function it is important
to catch this. Compiler's instrumentation cannot do this since
these functions are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions
in mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in name, so we could call non-instrumented variant
if needed.
Some files built without kasan instrumentation (e.g. mm/slub.c).
Original mem* function replaced (via #define) with prefixed variants
to disable memory access checks for such files.
On arm LPAE architecture, the mapping table of KASan shadow memory(if
PAGE_OFFSET is 0xc0000000, the KASan shadow memory's virtual space is
0xb6e000000~0xbf000000) can't be filled in do_translation_fault function,
because kasan instrumentation maybe cause do_translation_fault function
accessing KASan shadow memory. The accessing of KASan shadow memory in
do_translation_fault function maybe cause dead circle. So the mapping table
of KASan shadow memory need be copyed in pgd_alloc function.
Most of the code comes from:
https://github.com/aryabinin/linux/commit/0b54f17e70ff50a902c4af05bb92716eb95acefe
These patches are tested on vexpress-ca15, vexpress-ca9
Abbott Liu (2):
ARM: Add TTBR operator for kasan_init
ARM: Define the virtual space of KASan's shadow region
Andrey Ryabinin (4):
ARM: Disable instrumentation for some code
ARM: Replace memory function for kasan
ARM: Initialize the mapping of KASan shadow memory
ARM: Enable KASan for ARM
Florian Fainelli (1):
ARM: Moved CP15 definitions from kvm_hyp.h to cp15.h
Documentation/dev-tools/kasan.rst | 4 +-
arch/arm/Kconfig | 9 +
arch/arm/boot/compressed/Makefile | 2 +
arch/arm/include/asm/cp15.h | 107 +++++++++
arch/arm/include/asm/kasan.h | 35 +++
arch/arm/include/asm/kasan_def.h | 63 ++++++
arch/arm/include/asm/kvm_hyp.h | 54 -----
arch/arm/include/asm/memory.h | 5 +
arch/arm/include/asm/pgalloc.h | 9 +-
arch/arm/include/asm/string.h | 17 ++
arch/arm/include/asm/thread_info.h | 4 +
arch/arm/kernel/entry-armv.S | 5 +-
arch/arm/kernel/entry-common.S | 9 +-
arch/arm/kernel/head-common.S | 7 +-
arch/arm/kernel/setup.c | 2 +
arch/arm/kernel/unwind.c | 6 +-
arch/arm/kvm/hyp/cp15-sr.c | 12 +-
arch/arm/kvm/hyp/switch.c | 6 +-
arch/arm/lib/memcpy.S | 3 +
arch/arm/lib/memmove.S | 5 +-
arch/arm/lib/memset.S | 3 +
arch/arm/mm/Makefile | 4 +
arch/arm/mm/kasan_init.c | 302 ++++++++++++++++++++++++++
arch/arm/mm/mmu.c | 7 +-
arch/arm/mm/pgd.c | 14 ++
arch/arm/vdso/Makefile | 2 +
drivers/firmware/efi/libstub/Makefile | 3 +-
27 files changed, 621 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/include/asm/kasan.h
create mode 100644 arch/arm/include/asm/kasan_def.h
create mode 100644 arch/arm/mm/kasan_init.c
--
2.17.1
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
