At present ARMv8 event counters are limited to 32-bits, though by
using the CHAIN event it's possible to combine adjacent counters to
achieve 64-bits. The perf config1:0 bit can be set to use such a
configuration.
With the introduction of ARMv8.5-PMU support, all event counters can
now be used as 64-bit counters. Let's add support for 64-bit event
counters.
As KVM doesn't yet support 64-bit event counters, we also trap
and emulate the Debug Feature Registers to limit the PMU version a
guest sees to PMUv3 for ARMv8.4.
Tested by running the following perf command on both guest and host
and ensuring that the figures are very similar:
perf stat -e armv8_pmuv3/inst_retired,long=1/ \
-e armv8_pmuv3/inst_retired,long=0/ -e cycles
Changes since v2:
- Rebased onto v5.5-rc4
- Mask 'cap' value to 'width' in cpuid_feature_cap_signed_field_width
Changes since v1:
- Rebased onto v5.5-rc1
Andrew Murray (3):
arm64: cpufeature: Extract capped fields
KVM: arm64: limit PMU version to ARMv8.4
arm64: perf: Add support for ARMv8.5-PMU 64-bit counters
arch/arm64/include/asm/cpufeature.h | 16 ++++++
arch/arm64/include/asm/perf_event.h | 3 +-
arch/arm64/include/asm/sysreg.h | 4 ++
arch/arm64/kernel/perf_event.c | 86 +++++++++++++++++++++++------
arch/arm64/kvm/sys_regs.c | 36 +++++++++++-
include/linux/perf/arm_pmu.h | 1 +
6 files changed, 126 insertions(+), 20 deletions(-)
--
2.21.0
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
