[PATCH v3 04/32] irqchip/gic-v3: Use SGIs without active state if offered

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If running under control of a hypervisor that implements GICv4.1
SGIs, allow the hypervisor to use them at the expense of loosing
the Active state (which we don't care about for SGIs).

This is trivially done by checking for GICD_TYPER2.nASSGIcap, and
setting GICD_CTLR.nASSGIreq when enabling Group-1 interrupts.

Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
 drivers/irqchip/irq-gic-v3.c       | 10 ++++++++--
 include/linux/irqchip/arm-gic-v3.h |  2 ++
 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 640d4db65b78..624f351c0362 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -724,6 +724,7 @@ static void __init gic_dist_init(void)
 	unsigned int i;
 	u64 affinity;
 	void __iomem *base = gic_data.dist_base;
+	u32 val;
 
 	/* Disable the distributor */
 	writel_relaxed(0, base + GICD_CTLR);
@@ -756,9 +757,14 @@ static void __init gic_dist_init(void)
 	/* Now do the common stuff, and wait for the distributor to drain */
 	gic_dist_config(base, GIC_LINE_NR, gic_dist_wait_for_rwp);
 
+	val = GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1;
+	if (gic_data.rdists.gicd_typer2 & GICD_TYPER2_nASSGIcap) {
+		pr_info("Enabling SGIs without active state\n");
+		val |= GICD_CTLR_nASSGIreq;
+	}
+
 	/* Enable distributor with ARE, Group1 */
-	writel_relaxed(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1,
-		       base + GICD_CTLR);
+	writel_relaxed(val, base + GICD_CTLR);
 
 	/*
 	 * Set all global interrupts to the boot CPU only. ARE must be
diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index 9dfe64189d99..72b69f4e6c7b 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -57,6 +57,7 @@
 #define GICD_SPENDSGIR			0x0F20
 
 #define GICD_CTLR_RWP			(1U << 31)
+#define GICD_CTLR_nASSGIreq		(1U << 8)
 #define GICD_CTLR_DS			(1U << 6)
 #define GICD_CTLR_ARE_NS		(1U << 4)
 #define GICD_CTLR_ENABLE_G1A		(1U << 1)
@@ -90,6 +91,7 @@
 #define GICD_TYPER_ESPIS(typer)						\
 	(((typer) & GICD_TYPER_ESPI) ? GICD_TYPER_SPIS((typer) >> 27) : 0)
 
+#define GICD_TYPER2_nASSGIcap		(1U << 8)
 #define GICD_TYPER2_VIL			(1U << 7)
 #define GICD_TYPER2_VID			GENMASK(4, 0)
 
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux