[PATCH 15/22] KVM: arm64: Don't set HCR_EL2.TVM when S2FWB is supported

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Christoffer Dall <christoffer.dall@xxxxxxx>

On CPUs that support S2FWB (Armv8.4+), KVM configures the stage 2 page
tables to override the memory attributes of memory accesses, regardless
of the stage 1 page table configurations, and also when the stage 1 MMU
is turned off.  This results in all memory accesses to RAM being
cacheable, including during early boot of the guest.

On CPUs without this feature, memory accesses were non-cacheable during
boot until the guest turned on the stage 1 MMU, and we had to detect
when the guest turned on the MMU, such that we could invalidate all cache
entries and ensure a consistent view of memory with the MMU turned on.
When the guest turned on the caches, we would call stage2_flush_vm()
from kvm_toggle_cache().

However, stage2_flush_vm() walks all the stage 2 tables, and calls
__kvm_flush-dcache_pte, which on a system with S2FWB does ... absolutely
nothing.

We can avoid that whole song and dance, and simply not set TVM when
creating a VM on a system that has S2FWB.

Signed-off-by: Christoffer Dall <christoffer.dall@xxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
Reviewed-by: Mark Rutland <mark.rutland@xxxxxxx>
Link: https://lore.kernel.org/r/20191028130541.30536-1-christoffer.dall@xxxxxxx
---
 arch/arm64/include/asm/kvm_arm.h     |  3 +--
 arch/arm64/include/asm/kvm_emulate.h | 12 +++++++++++-
 2 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index ddf9d762ac62..6e5d839f42b5 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -61,7 +61,6 @@
  * RW:		64bit by default, can be overridden for 32bit VMs
  * TAC:		Trap ACTLR
  * TSC:		Trap SMC
- * TVM:		Trap VM ops (until M+C set in SCTLR_EL1)
  * TSW:		Trap cache operations by set/way
  * TWE:		Trap WFE
  * TWI:		Trap WFI
@@ -74,7 +73,7 @@
  * SWIO:	Turn set/way invalidates into set/way clean+invalidate
  */
 #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
-			 HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \
+			 HCR_BSU_IS | HCR_FB | HCR_TAC | \
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
 			 HCR_FMO | HCR_IMO)
 #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
index d69c1efc63e7..6e92f6c7b1e4 100644
--- a/arch/arm64/include/asm/kvm_emulate.h
+++ b/arch/arm64/include/asm/kvm_emulate.h
@@ -53,8 +53,18 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
 		/* trap error record accesses */
 		vcpu->arch.hcr_el2 |= HCR_TERR;
 	}
-	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
+
+	if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) {
 		vcpu->arch.hcr_el2 |= HCR_FWB;
+	} else {
+		/*
+		 * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C
+		 * get set in SCTLR_EL1 such that we can detect when the guest
+		 * MMU gets turned on and do the necessary cache maintenance
+		 * then.
+		 */
+		vcpu->arch.hcr_el2 |= HCR_TVM;
+	}
 
 	if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
 		vcpu->arch.hcr_el2 &= ~HCR_RW;
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux