[PATCH 2/3] kvm: arm: VGIC: Scan all IRQs when interrupt group gets enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Our current VGIC emulation code treats the "EnableGrpX" bits in GICD_CTLR
as a single global interrupt delivery switch, where in fact the GIC
architecture asks for this being separate for the two interrupt groups.

To implement this properly, we have to slightly adjust our design, to
*not* let IRQs from a disabled interrupt group be added to the ap_list.

As a consequence, enabling one group requires us to re-evaluate every
pending IRQ and potentially add it to its respective ap_list. Similarly
disabling an interrupt group requires pending IRQs to be removed from
the ap_list (as long as they have not been activated yet).

Implement a rather simple, yet not terribly efficient algorithm to
achieve this: For each VCPU we iterate over all IRQs, checking for
pending ones and adding them to the list. We hold the ap_list_lock
for this, to make this atomic from a VCPU's point of view.

When an interrupt group gets disabled, we can't directly remove affected
IRQs from the ap_list, as a running VCPU might have already activated
them, which wouldn't be immediately visible to the host.
Instead simply kick all VCPUs, so that they clean their ap_list's
automatically when running vgic_prune_ap_list().

Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
---
 virt/kvm/arm/vgic/vgic.c | 88 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 80 insertions(+), 8 deletions(-)

diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
index 3b88e14d239f..28d9ff282017 100644
--- a/virt/kvm/arm/vgic/vgic.c
+++ b/virt/kvm/arm/vgic/vgic.c
@@ -339,6 +339,38 @@ int vgic_dist_enable_group(struct kvm *kvm, int group, bool status)
 	return 0;
 }
 
+/*
+ * Check whether a given IRQs need to be queued to this ap_list, and do
+ * so if that's the case.
+ * Requires the ap_list_lock to be held (but not the irq lock).
+ *
+ * Returns 1 if that IRQ has been added to the ap_list, and 0 if not.
+ */
+static int queue_enabled_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
+			     int intid)
+{
+	struct vgic_irq *irq = vgic_get_irq(kvm, vcpu, intid);
+	int ret = 0;
+
+	raw_spin_lock(&irq->irq_lock);
+	if (!irq->vcpu && vcpu == vgic_target_oracle(irq)) {
+		/*
+		 * Grab a reference to the irq to reflect the
+		 * fact that it is now in the ap_list.
+		 */
+		vgic_get_irq_kref(irq);
+		list_add_tail(&irq->ap_list,
+			      &vcpu->arch.vgic_cpu.ap_list_head);
+		irq->vcpu = vcpu;
+
+		ret = 1;
+	}
+	raw_spin_unlock(&irq->irq_lock);
+	vgic_put_irq(kvm, irq);
+
+	return ret;
+}
+
 /*
  * The group enable status of at least one of the groups has changed.
  * If enabled is true, at least one of the groups got enabled.
@@ -346,17 +378,57 @@ int vgic_dist_enable_group(struct kvm *kvm, int group, bool status)
  */
 void vgic_rescan_pending_irqs(struct kvm *kvm, bool enabled)
 {
+	int cpuid;
+	struct kvm_vcpu *vcpu;
+
 	/*
-	 * TODO: actually scan *all* IRQs of the VM for pending IRQs.
-	 * If a pending IRQ's group is now enabled, add it to its ap_list.
-	 * If a pending IRQ's group is now disabled, kick the VCPU to
-	 * let it remove this IRQ from its ap_list. We have to let the
-	 * VCPU do it itself, because we can't know the exact state of an
-	 * IRQ pending on a running VCPU.
+	 * If no group got enabled, we only have to potentially remove
+	 * interrupts from ap_lists. We can't do this here, because a running
+	 * VCPU might have ACKed an IRQ already, which wouldn't immediately
+	 * be reflected in the ap_list.
+	 * So kick all VCPUs, which will let them re-evaluate their ap_lists
+	 * by running vgic_prune_ap_list(), removing no longer enabled
+	 * IRQs.
+	 */
+	if (!enabled) {
+		vgic_kick_vcpus(kvm);
+
+		return;
+	}
+
+	/*
+	 * At least one group went from disabled to enabled. Now we need
+	 * to scan *all* IRQs of the VM for newly group-enabled IRQs.
+	 * If a pending IRQ's group is now enabled, add it to the ap_list.
+	 *
+	 * For each VCPU this needs to be atomic, as we need *all* newly
+	 * enabled IRQs in be in the ap_list to determine the highest
+	 * priority one.
+	 * So grab the ap_list_lock, then iterate over all private IRQs and
+	 * all SPIs. Once the ap_list is updated, kick that VCPU to
+	 * forward any new IRQs to the guest.
 	 */
+	kvm_for_each_vcpu(cpuid, vcpu, kvm) {
+		unsigned long flags;
+		int i;
 
-	 /* For now just kick all VCPUs, as the old code did. */
-	vgic_kick_vcpus(kvm);
+		raw_spin_lock_irqsave(&vcpu->arch.vgic_cpu.ap_list_lock, flags);
+
+		for (i = 0; i < VGIC_NR_PRIVATE_IRQS; i++)
+			queue_enabled_irq(kvm, vcpu, i);
+
+		for (i = VGIC_NR_PRIVATE_IRQS;
+		     i < kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS; i++)
+			queue_enabled_irq(kvm, vcpu, i);
+
+                raw_spin_unlock_irqrestore(&vcpu->arch.vgic_cpu.ap_list_lock,
+                                           flags);
+
+		if (kvm_vgic_vcpu_pending_irq(vcpu)) {
+			kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
+			kvm_vcpu_kick(vcpu);
+		}
+	}
 }
 
 bool vgic_dist_group_enabled(struct kvm *kvm, int group)
-- 
2.17.1

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux