Hi,
Resending this email, because I replied only to the kvmarm list by accident,
instead of replying to everyone involved.
On 10/28/19 1:05 PM, Christoffer Dall wrote:
> On CPUs that support S2FWB (Armv8.4+), KVM configures the stage 2 page
> tables to override the memory attributes of memory accesses, regardless
> of the stage 1 page table configurations, and also when the stage 1 MMU
> is turned off. This results in all memory accesses to RAM being
> cacheable, including during early boot of the guest.
>
> On CPUs without this feature, memory accesses were non-cacheable during
> boot until the guest turned on the stage 1 MMU, and we had to detect
> when the guest turned on the MMU, such that we could invalidate all cache
> entries and ensure a consistent view of memory with the MMU turned on.
> When the guest turned on the caches, we would call stage2_flush_vm()
> from kvm_toggle_cache().
>
> However, stage2_flush_vm() walks all the stage 2 tables, and calls
> __kvm_flush-dcache_pte, which on a system with S2FWD does ... absolutely
> nothing.
>
> We can avoid that whole song and dance, and simply not set TVM when
> creating a VM on a system that has S2FWB.
>
> Signed-off-by: Christoffer Dall <christoffer.dall@xxxxxxx>
> Reviewed-by: Mark Rutland <mark.rutland@xxxxxxx>
> ---
> I was only able to test this on the model with cache modeling enabled,
> but even removing TVM from HCR_EL2 without having FWB also worked with
> that setup, so the testing of this has been light. It seems like it
> should obviously work, but it would be good if someone with access to
> appropriate hardware could give this a spin.
>
> arch/arm64/include/asm/kvm_arm.h | 3 +--
> arch/arm64/include/asm/kvm_emulate.h | 12 +++++++++++-
> 2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> index ddf9d762ac62..6e5d839f42b5 100644
> --- a/arch/arm64/include/asm/kvm_arm.h
> +++ b/arch/arm64/include/asm/kvm_arm.h
> @@ -61,7 +61,6 @@
> * RW: 64bit by default, can be overridden for 32bit VMs
> * TAC: Trap ACTLR
> * TSC: Trap SMC
> - * TVM: Trap VM ops (until M+C set in SCTLR_EL1)
> * TSW: Trap cache operations by set/way
> * TWE: Trap WFE
> * TWI: Trap WFI
> @@ -74,7 +73,7 @@
> * SWIO: Turn set/way invalidates into set/way clean+invalidate
> */
> #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
> - HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \
> + HCR_BSU_IS | HCR_FB | HCR_TAC | \
> HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
> HCR_FMO | HCR_IMO)
> #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
> diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h
> index d69c1efc63e7..70509799a2a9 100644
> --- a/arch/arm64/include/asm/kvm_emulate.h
> +++ b/arch/arm64/include/asm/kvm_emulate.h
> @@ -53,8 +53,18 @@ static inline void vcpu_reset_hcr(struct kvm_vcpu *vcpu)
> /* trap error record accesses */
> vcpu->arch.hcr_el2 |= HCR_TERR;
> }
> - if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB))
> +
> + if (cpus_have_const_cap(ARM64_HAS_STAGE2_FWB)) {
> vcpu->arch.hcr_el2 |= HCR_FWB;
> + } else {
> + /*
> + * For non-FWB CPUs, we trap VM ops (HCR_EL2.TVM) until M+C
> + * get set in SCTLR_EL1 such that we can detect when the guest
> + * MMU gets turned off and do the necessary cache maintenance
> + * then.
> + */
> + vcpu->arch.hcr_el2 &= ~HCR_TVM;
Don't we want to set the bit here, so we're consistent with the previous behaviour and the comment? Because with this patch, we never set HCR_EL2.TVM...
Thanks,
Alex
> + }
>
> if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features))
> vcpu->arch.hcr_el2 &= ~HCR_RW;
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
