On Fri, 6 Sep 2019 08:48:37 +0200
Andrew Jones <drjones@xxxxxxxxxx> wrote:
Hi,
> On Thu, Sep 05, 2019 at 06:21:14PM +0100, Andre Przywara wrote:
> > So far the GIC MMIO tests were only enabled for a GICv2 guest. Modern
> > machines tend to have a GICv3-only GIC, so can't run those guests.
> > It turns out that most GIC distributor registers we test in the unit
> > tests are actually the same in GICv3, so we can just enable those tests
> > for GICv3 guests as well.
> > The only exception is the CPU number in the TYPER register, which we
> > just protect against running on a GICv3 guest.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> > ---
> > arm/gic.c | 13 +++++++++++--
> > arm/unittests.cfg | 16 +++++++++++-----
> > lib/arm/asm/gic.h | 2 ++
> > 3 files changed, 24 insertions(+), 7 deletions(-)
> >
> > diff --git a/arm/gic.c b/arm/gic.c
> > index ed5642e..bd3c027 100644
> > --- a/arm/gic.c
> > +++ b/arm/gic.c
> > @@ -6,6 +6,7 @@
> > * + MMIO access tests
> > * GICv3
> > * + test sending/receiving IPIs
> > + * + MMIO access tests
> > *
> > * Copyright (C) 2016, Red Hat Inc, Andrew Jones <drjones@xxxxxxxxxx>
> > *
> > @@ -483,7 +484,14 @@ static void gic_test_mmio(void)
> > idreg = gic_dist_base + GICD_ICPIDR2;
> > break;
> > case 0x3:
> > - report_abort("GICv3 MMIO tests NYI");
> > + /*
> > + * We only test generic registers or those affecting
> > + * SPIs, so don't need to consider the SGI base in
> > + * the redistributor here.
> > + */
> > + gic_dist_base = gicv3_dist_base();
> > + idreg = gic_dist_base + GICD_PIDR2;
> > + break;
> > default:
> > report_abort("GIC version %d not supported", gic_version());
> > }
> > @@ -492,7 +500,8 @@ static void gic_test_mmio(void)
> > nr_irqs = GICD_TYPER_IRQS(reg);
> > report_info("number of implemented SPIs: %d", nr_irqs - GIC_FIRST_SPI);
> >
> > - test_typer_v2(reg);
> > + if (gic_version() == 0x2)
> > + test_typer_v2(reg);
> >
> > report_info("IIDR: 0x%08x", readl(gic_dist_base + GICD_IIDR));
> >
> > diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> > index 6d3df92..3fd5b04 100644
> > --- a/arm/unittests.cfg
> > +++ b/arm/unittests.cfg
> > @@ -86,22 +86,28 @@ smp = $((($MAX_SMP < 8)?$MAX_SMP:8))
> > extra_params = -machine gic-version=2 -append 'ipi'
> > groups = gic
> >
> > -[gicv2-mmio]
> > +[gicv2-max-mmio]
> > file = gic.flat
> > smp = $((($MAX_SMP < 8)?$MAX_SMP:8))
> > extra_params = -machine gic-version=2 -append 'mmio'
> > groups = gic
> >
> > -[gicv2-mmio-up]
> > +[gicv3-max-mmio]
> > +file = gic.flat
> > +smp = $MAX_SMP
> > +extra_params = -machine gic-version=3 -append 'mmio'
> > +groups = gic
> > +
> > +[gic-mmio-up]
> > file = gic.flat
> > smp = 1
> > -extra_params = -machine gic-version=2 -append 'mmio'
> > +extra_params = -append 'mmio'
> > groups = gic
> >
> > -[gicv2-mmio-3p]
> > +[gic-mmio-3p]
> > file = gic.flat
> > smp = $((($MAX_SMP < 3)?$MAX_SMP:3))
> > -extra_params = -machine gic-version=2 -append 'mmio'
> > +extra_params = -append 'mmio'
> > groups = gic
> >
> > [gicv3-ipi]
> > diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
> > index f6dfb90..ffed025 100644
> > --- a/lib/arm/asm/gic.h
> > +++ b/lib/arm/asm/gic.h
> > @@ -23,6 +23,8 @@
> > #define GICD_ITARGETSR 0x0800
> > #define GICD_SGIR 0x0f00
> > #define GICD_ICPIDR2 0x0fe8
> > +/* only in GICv3 */
> > +#define GICD_PIDR2 0xffe8
>
> If this is gicv3-only, then shouldn't it go to lib/arm/asm/gic-v3.h ?
Ah, true, I missed that file.
Added it there, I will send a reworked version as part of now some bigger series to test GICD_IROUTER and SPIs as well.
>
> >
> > #define GICD_TYPER_IRQS(typer) ((((typer) & 0x1f) + 1) * 32)
> > #define GICD_INT_EN_SET_SGI 0x0000ffff
> > --
> > 2.17.1
> >
>
> Otherwise
>
> Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx>
Thanks!
Cheers,
Andre.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
