On Tue, Jul 30, 2019 at 10:30:50AM +0100, Alexandru Elisei wrote:
> On 7/29/19 12:23 PM, Andrew Jones wrote:
> > On Mon, Jul 29, 2019 at 10:28:52AM +0100, Alexandru Elisei wrote:
> >> Commit 204e85aa9352 ("arm64: timer: a few test improvements") added a call
> >> to report_info after enabling the timer and before the wfi instruction. The
> >> uart that printf uses is emulated by userspace and is slow, which makes it
> >> more likely that the timer interrupt will fire before executing the wfi
> >> instruction, which leads to a deadlock.
> >>
> >> An interrupt can wake up a CPU out of wfi, regardless of the
> >> PSTATE.{A, I, F} bits. Fix the deadlock by masking interrupts on the CPU
> >> before enabling the timer and unmasking them after the wfi returns so the
> >> CPU can execute the timer interrupt handler.
> >>
> >> Suggested-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> >> Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
> >> ---
> >> arm/timer.c | 2 ++
> >> 1 file changed, 2 insertions(+)
> >>
> >> diff --git a/arm/timer.c b/arm/timer.c
> >> index 6f2ad1d76ab2..f2f60192ba62 100644
> >> --- a/arm/timer.c
> >> +++ b/arm/timer.c
> >> @@ -242,9 +242,11 @@ static void test_timer(struct timer_info *info)
> >> /* Test TVAL and IRQ trigger */
> >> info->irq_received = false;
> >> info->write_tval(read_sysreg(cntfrq_el0) / 100); /* 10 ms */
> >> + local_irq_disable();
> >> info->write_ctl(ARCH_TIMER_CTL_ENABLE);
> >> report_info("waiting for interrupt...");
> >> wfi();
> >> + local_irq_enable();
> >> left = info->read_tval();
> >> report("interrupt received after TVAL/WFI", info->irq_received);
> >> report("timer has expired (%d)", left < 0, left);
> >> --
> >> 2.7.4
> >>
> > Reviewed-by: Andrew Jones <drjones@xxxxxxxxxx>
> >
> > Thanks Alexandru. It now makes more sense to me that wfi wakes up on
> > an interrupt, even when interrupts are masked, as it's clearly to
> > avoid these types of races. I see we have the same type of race in
> > arm/gic.c. I'll try to get around to fixing that at some point, unless
> > somebody beats me to it :)
>
> Something like this? Tested with gicv3-ipi.
>
> diff --git a/arm/gic.c b/arm/gic.c
> index ed5642e74f70..f0bd5739842a 100644
> --- a/arm/gic.c
> +++ b/arm/gic.c
> @@ -220,12 +220,12 @@ static void ipi_enable(void)
> #else
> install_irq_handler(EL1H_IRQ, ipi_handler);
> #endif
> - local_irq_enable();
> }
>
> static void ipi_send(void)
> {
> ipi_enable();
> + local_irq_enable();
> wait_on_ready();
> ipi_test_self();
> ipi_test_smp();
> @@ -236,9 +236,13 @@ static void ipi_send(void)
> static void ipi_recv(void)
> {
> ipi_enable();
> + local_irq_disable();
> cpumask_set_cpu(smp_processor_id(), &ready);
> - while (1)
> + while (1) {
> + local_irq_disable();
> wfi();
> + local_irq_enable();
> + }
> }
>
> static void ipi_test(void *data __unused)
I'm not sure we need to worry about enabling/disabling interrupts around
the wfi, since we're just doing a tight loop on it. I think something like
this (untested), which is quite similar to your approach, should work
diff --git a/arm/gic.c b/arm/gic.c
index ed5642e74f70..cdbb4134b0af 100644
--- a/arm/gic.c
+++ b/arm/gic.c
@@ -214,18 +214,19 @@ static void ipi_test_smp(void)
static void ipi_enable(void)
{
+ local_irq_disable();
gic_enable_defaults();
#ifdef __arm__
install_exception_handler(EXCPTN_IRQ, ipi_handler);
#else
install_irq_handler(EL1H_IRQ, ipi_handler);
#endif
- local_irq_enable();
}
static void ipi_send(void)
{
ipi_enable();
+ local_irq_enable();
wait_on_ready();
ipi_test_self();
ipi_test_smp();
@@ -237,6 +238,7 @@ static void ipi_recv(void)
{
ipi_enable();
cpumask_set_cpu(smp_processor_id(), &ready);
+ local_irq_enable();
while (1)
wfi();
}
What do you think?
Thanks,
drew
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
