Re: [PATCH v8 04/29] iommu: Add recoverable fault reporting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 26 May 2019 18:09:39 +0200
Eric Auger <eric.auger@xxxxxxxxxx> wrote:

> From: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> 
> Some IOMMU hardware features, for example PCI's PRI and Arm SMMU's Stall,
> enable recoverable I/O page faults. Allow IOMMU drivers to report PRI Page
> Requests and Stall events through the new fault reporting API. The
> consumer of the fault can be either an I/O page fault handler in the host,
> or a guest OS.
> 
> Once handled, the fault must be completed by sending a page response back
> to the IOMMU. Add an iommu_page_response() function to complete a page
> fault.
> 
> Signed-off-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> ---
>  drivers/iommu/iommu.c | 77 ++++++++++++++++++++++++++++++++++++++++++-
>  include/linux/iommu.h | 51 ++++++++++++++++++++++++++++
>  2 files changed, 127 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 795518445a3a..13b301cfb10f 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -869,7 +869,14 @@ EXPORT_SYMBOL_GPL(iommu_group_unregister_notifier);
>   * @data: private data passed as argument to the handler
>   *
>   * When an IOMMU fault event is received, this handler gets called with the
> - * fault event and data as argument.
> + * fault event and data as argument. The handler should return 0 on success. If
> + * the fault is recoverable (IOMMU_FAULT_PAGE_REQ), the handler should also
> + * complete the fault by calling iommu_page_response() with one of the following
> + * response code:
> + * - IOMMU_PAGE_RESP_SUCCESS: retry the translation
> + * - IOMMU_PAGE_RESP_INVALID: terminate the fault
> + * - IOMMU_PAGE_RESP_FAILURE: terminate the fault and stop reporting
> + *   page faults if possible.
>   *
>   * Return 0 if the fault handler was installed successfully, or an error.
>   */
> @@ -904,6 +911,8 @@ int iommu_register_device_fault_handler(struct device *dev,
>  	}
>  	param->fault_param->handler = handler;
>  	param->fault_param->data = data;
> +	mutex_init(&param->fault_param->lock);
> +	INIT_LIST_HEAD(&param->fault_param->faults);
>  
>  done_unlock:
>  	mutex_unlock(&param->lock);
> @@ -934,6 +943,12 @@ int iommu_unregister_device_fault_handler(struct device *dev)
>  	if (!param->fault_param)
>  		goto unlock;
>  
> +	/* we cannot unregister handler if there are pending faults */
> +	if (!list_empty(&param->fault_param->faults)) {
> +		ret = -EBUSY;
> +		goto unlock;
> +	}

Why?  Attempting to unregister a fault handler suggests the handler
doesn't care about outstanding faults.  Can't we go ahead and dispatch
them as failed?  Otherwise we need to be careful that we don't
introduce an environment where the registered fault handler is blocked
trying to shutdown and release the device due to a flood of errors.
Thanks,

Alex

> +
>  	kfree(param->fault_param);
>  	param->fault_param = NULL;
>  	put_device(dev);
> @@ -958,6 +973,7 @@ EXPORT_SYMBOL_GPL(iommu_unregister_device_fault_handler);
>  int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
>  {
>  	struct iommu_param *param = dev->iommu_param;
> +	struct iommu_fault_event *evt_pending;
>  	struct iommu_fault_param *fparam;
>  	int ret = 0;
>  
> @@ -972,6 +988,20 @@ int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
>  		ret = -EINVAL;
>  		goto done_unlock;
>  	}
> +
> +	if (evt->fault.type == IOMMU_FAULT_PAGE_REQ &&
> +	    (evt->fault.prm.flags & IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE)) {
> +		evt_pending = kmemdup(evt, sizeof(struct iommu_fault_event),
> +				      GFP_KERNEL);
> +		if (!evt_pending) {
> +			ret = -ENOMEM;
> +			goto done_unlock;
> +		}
> +		mutex_lock(&fparam->lock);
> +		list_add_tail(&evt_pending->list, &fparam->faults);
> +		mutex_unlock(&fparam->lock);
> +	}
> +
>  	ret = fparam->handler(evt, fparam->data);
>  done_unlock:
>  	mutex_unlock(&param->lock);
> @@ -1513,6 +1543,51 @@ int iommu_attach_device(struct iommu_domain *domain, struct device *dev)
>  }
>  EXPORT_SYMBOL_GPL(iommu_attach_device);
>  
> +int iommu_page_response(struct device *dev,
> +			struct page_response_msg *msg)
> +{
> +	struct iommu_param *param = dev->iommu_param;
> +	int ret = -EINVAL;
> +	struct iommu_fault_event *evt;
> +	struct iommu_domain *domain = iommu_get_domain_for_dev(dev);
> +
> +	if (!domain || !domain->ops->page_response)
> +		return -ENODEV;
> +
> +	/*
> +	 * Device iommu_param should have been allocated when device is
> +	 * added to its iommu_group.
> +	 */
> +	if (!param || !param->fault_param)
> +		return -EINVAL;
> +
> +	/* Only send response if there is a fault report pending */
> +	mutex_lock(&param->fault_param->lock);
> +	if (list_empty(&param->fault_param->faults)) {
> +		pr_warn("no pending PRQ, drop response\n");
> +		goto done_unlock;
> +	}
> +	/*
> +	 * Check if we have a matching page request pending to respond,
> +	 * otherwise return -EINVAL
> +	 */
> +	list_for_each_entry(evt, &param->fault_param->faults, list) {
> +		if (evt->fault.prm.pasid == msg->pasid &&
> +		    evt->fault.prm.grpid == msg->grpid) {
> +			msg->iommu_data = evt->iommu_private;
> +			ret = domain->ops->page_response(dev, msg);
> +			list_del(&evt->list);
> +			kfree(evt);
> +			break;
> +		}
> +	}
> +
> +done_unlock:
> +	mutex_unlock(&param->fault_param->lock);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_page_response);
> +
>  static void __iommu_detach_device(struct iommu_domain *domain,
>  				  struct device *dev)
>  {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index b87b74c63cf9..950347be47f9 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -191,6 +191,42 @@ struct iommu_sva_ops {
>  
>  #ifdef CONFIG_IOMMU_API
>  
> +/**
> + * enum page_response_code - Return status of fault handlers, telling the IOMMU
> + * driver how to proceed with the fault.
> + *
> + * @IOMMU_PAGE_RESP_SUCCESS: Fault has been handled and the page tables
> + *	populated, retry the access. This is "Success" in PCI PRI.
> + * @IOMMU_PAGE_RESP_FAILURE: General error. Drop all subsequent faults from
> + *	this device if possible. This is "Response Failure" in PCI PRI.
> + * @IOMMU_PAGE_RESP_INVALID: Could not handle this fault, don't retry the
> + *	access. This is "Invalid Request" in PCI PRI.
> + */
> +enum page_response_code {
> +	IOMMU_PAGE_RESP_SUCCESS = 0,
> +	IOMMU_PAGE_RESP_INVALID,
> +	IOMMU_PAGE_RESP_FAILURE,
> +};
> +
> +/**
> + * struct page_response_msg - Generic page response information based on PCI ATS
> + *                            and PASID spec
> + * @addr: servicing page address
> + * @pasid: contains process address space ID
> + * @pasid_present: the @pasid field is valid
> + * @resp_code: response code
> + * @grpid: page request group index
> + * @iommu_data: data private to the IOMMU
> + */
> +struct page_response_msg {
> +	u64 addr;
> +	u32 pasid;
> +	u32 pasid_present:1;
> +	enum page_response_code resp_code;
> +	u32 grpid;
> +	u64 iommu_data;
> +};
> +
>  /**
>   * struct iommu_ops - iommu ops and capabilities
>   * @capable: check capability
> @@ -227,6 +263,7 @@ struct iommu_sva_ops {
>   * @sva_bind: Bind process address space to device
>   * @sva_unbind: Unbind process address space from device
>   * @sva_get_pasid: Get PASID associated to a SVA handle
> + * @page_response: handle page request response
>   * @pgsize_bitmap: bitmap of all possible supported page sizes
>   */
>  struct iommu_ops {
> @@ -287,6 +324,8 @@ struct iommu_ops {
>  	void (*sva_unbind)(struct iommu_sva *handle);
>  	int (*sva_get_pasid)(struct iommu_sva *handle);
>  
> +	int (*page_response)(struct device *dev, struct page_response_msg *msg);
> +
>  	unsigned long pgsize_bitmap;
>  };
>  
> @@ -311,11 +350,13 @@ struct iommu_device {
>   * unrecoverable faults such as DMA or IRQ remapping faults.
>   *
>   * @fault: fault descriptor
> + * @list: pending fault event list, used for tracking responses
>   * @iommu_private: used by the IOMMU driver for storing fault-specific
>   *                 data. Users should not modify this field before
>   *                 sending the fault response.
>   */
>  struct iommu_fault_event {
> +	struct list_head list;
>  	struct iommu_fault fault;
>  	u64 iommu_private;
>  };
> @@ -325,10 +366,14 @@ struct iommu_fault_event {
>   *
>   * @handler: Callback function to handle IOMMU faults at device level
>   * @data: handler private data
> + * @faults: holds the pending faults which needs response, e.g. page response.
> + * @lock: protect pending faults list
>   */
>  struct iommu_fault_param {
>  	iommu_dev_fault_handler_t handler;
>  	void *data;
> +	struct list_head faults;
> +	struct mutex lock;
>  };
>  
>  /**
> @@ -443,6 +488,7 @@ extern int iommu_unregister_device_fault_handler(struct device *dev);
>  extern int iommu_report_device_fault(struct device *dev,
>  				     struct iommu_fault_event *evt);
>  
> +extern int iommu_page_response(struct device *dev, struct page_response_msg *msg);
>  extern int iommu_group_id(struct iommu_group *group);
>  extern struct iommu_group *iommu_group_get_for_dev(struct device *dev);
>  extern struct iommu_domain *iommu_group_default_domain(struct iommu_group *);
> @@ -770,6 +816,11 @@ int iommu_report_device_fault(struct device *dev, struct iommu_fault_event *evt)
>  	return -ENODEV;
>  }
>  
> +static inline int iommu_page_response(struct device *dev, struct page_response_msg *msg)
> +{
> +	return -ENODEV;
> +}
> +
>  static inline int iommu_group_id(struct iommu_group *group)
>  {
>  	return -ENODEV;

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux