On 26/03/2019 07:41, Leo Yan wrote:
> To support INTx enabling for multiple times, we need firstly to extract
> one-time initialisation and move the related code into a new function
> vfio_pci_init_intx(); if later disable and re-enable the INTx, we can
> skip these one-time operations.
>
> This patch move below three main operations for INTx one-time
> initialisation from function vfio_pci_enable_intx() into function
> vfio_pci_init_intx():
>
> - Reserve 2 FDs for INTx;
> - Sanity check with ioctl VFIO_DEVICE_GET_IRQ_INFO;
> - Setup pdev->intx_gsi.
>
> Suggested-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
Thanks for the patches
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> ---
> vfio/pci.c | 67 ++++++++++++++++++++++++++++++++----------------------
> 1 file changed, 40 insertions(+), 27 deletions(-)
>
> diff --git a/vfio/pci.c b/vfio/pci.c
> index 5224fee..3c39844 100644
> --- a/vfio/pci.c
> +++ b/vfio/pci.c
> @@ -1018,30 +1018,7 @@ static int vfio_pci_enable_intx(struct kvm *kvm, struct vfio_device *vdev)
> struct vfio_irq_eventfd trigger;
> struct vfio_irq_eventfd unmask;
> struct vfio_pci_device *pdev = &vdev->pci;
> - int gsi = pdev->hdr.irq_line - KVM_IRQ_OFFSET;
> -
> - struct vfio_irq_info irq_info = {
> - .argsz = sizeof(irq_info),
> - .index = VFIO_PCI_INTX_IRQ_INDEX,
> - };
> -
> - vfio_pci_reserve_irq_fds(2);
> -
> - ret = ioctl(vdev->fd, VFIO_DEVICE_GET_IRQ_INFO, &irq_info);
> - if (ret || irq_info.count == 0) {
> - vfio_dev_err(vdev, "no INTx reported by VFIO");
> - return -ENODEV;
> - }
> -
> - if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
> - vfio_dev_err(vdev, "interrupt not eventfd capable");
> - return -EINVAL;
> - }
> -
> - if (!(irq_info.flags & VFIO_IRQ_INFO_AUTOMASKED)) {
> - vfio_dev_err(vdev, "INTx interrupt not AUTOMASKED");
> - return -EINVAL;
> - }
> + int gsi = pdev->intx_gsi;
>
> /*
> * PCI IRQ is level-triggered, so we use two eventfds. trigger_fd
> @@ -1097,8 +1074,6 @@ static int vfio_pci_enable_intx(struct kvm *kvm, struct vfio_device *vdev)
>
> pdev->intx_fd = trigger_fd;
> pdev->unmask_fd = unmask_fd;
> - /* Guest is going to ovewrite our irq_line... */
> - pdev->intx_gsi = gsi;
>
> return 0;
>
> @@ -1117,6 +1092,39 @@ err_close:
> return ret;
> }
>
> +static int vfio_pci_init_intx(struct kvm *kvm, struct vfio_device *vdev)
> +{
> + int ret;
> + struct vfio_pci_device *pdev = &vdev->pci;
> + struct vfio_irq_info irq_info = {
> + .argsz = sizeof(irq_info),
> + .index = VFIO_PCI_INTX_IRQ_INDEX,
> + };
> +
> + vfio_pci_reserve_irq_fds(2);
> +
> + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_IRQ_INFO, &irq_info);
> + if (ret || irq_info.count == 0) {
> + vfio_dev_err(vdev, "no INTx reported by VFIO");
> + return -ENODEV;
> + }
> +
> + if (!(irq_info.flags & VFIO_IRQ_INFO_EVENTFD)) {
> + vfio_dev_err(vdev, "interrupt not eventfd capable");
> + return -EINVAL;
> + }
> +
> + if (!(irq_info.flags & VFIO_IRQ_INFO_AUTOMASKED)) {
> + vfio_dev_err(vdev, "INTx interrupt not AUTOMASKED");
> + return -EINVAL;
> + }
> +
> + /* Guest is going to ovewrite our irq_line... */
> + pdev->intx_gsi = pdev->hdr.irq_line - KVM_IRQ_OFFSET;
> +
> + return 0;
> +}
> +
> static int vfio_pci_configure_dev_irqs(struct kvm *kvm, struct vfio_device *vdev)
> {
> int ret = 0;
> @@ -1142,8 +1150,13 @@ static int vfio_pci_configure_dev_irqs(struct kvm *kvm, struct vfio_device *vdev
> return ret;
> }
>
> - if (pdev->irq_modes & VFIO_PCI_IRQ_MODE_INTX)
> + if (pdev->irq_modes & VFIO_PCI_IRQ_MODE_INTX) {
> + ret = vfio_pci_init_intx(kvm, vdev);
> + if (ret)
> + return ret;
> +
> ret = vfio_pci_enable_intx(kvm, vdev);
> + }
>
> return ret;
> }
>
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
