Hi, This patch series adds pointer authentication support for KVM guest and is based on top of Linux 5.1-rc3. The basic patches in this series was originally posted by Mark Rutland earlier[1,2] and contains some history of this work. Extension Overview: ============================================= The ARMv8.3 pointer authentication extension adds functionality to detect modification of pointer values, mitigating certain classes of attack such as stack smashing, and making return oriented programming attacks harder. The extension introduces the concept of a pointer authentication code (PAC), which is stored in some upper bits of pointers. Each PAC is derived from the original pointer, another 64-bit value (e.g. the stack pointer), and a secret 128-bit key. New instructions are added which can be used to: * Insert a PAC into a pointer * Strip a PAC from a pointer * Authenticate and strip a PAC from a pointer The detailed description of ARMv8.3 pointer authentication support in userspace/kernel and can be found in Kristina's generic pointer authentication patch series[3]. KVM guest work: ============================================== If pointer authentication is enabled for KVM guests then the new PAC instructions will not trap to EL2. If not then they may be ignored if in HINT region or trapped in EL2 as illegal instruction. Since KVM guest vcpu runs as a thread so they have a key initialized which will be used by PAC. When world switch happens between host and guest then this key is exchanged. The current v8 patch series contains review comments and suggestions by James Morse, Kristina Martsenko, Julien Thierry and Dave Martin. The first two patch is cherry picked from Dave Martin [10, 11] v6 series which adds SVE support for KVM guest. Changes since v7 [9]: Major changes are listed below and detail changes are in each patch. * Comments and Documentation updated to reflect using address/generic features flag together. * Dropped the documentation patch and added those details in the relevant patches. * Rebased the patch series on 2 patches of Dave Martin v6 SVE series. * Small bug fixes. Changes since v6 [8]: Major changes are listed below. * Pointer authentication key switch entirely in assembly now. * isb instruction added after Key switched to host. * Use __hyp_this_cpu_ptr for both VHE and nVHE mode. * 2 separate flags for address and generic authentication. * kvm_arm_vcpu_ptrauth_allowed renamed to has_vcpu_ptrauth. * kvm_arm_vcpu_ptrauth_reset renamed to kvm_arm_vcpu_ptrauth_setup_lazy. * Save of host Key registers now done in ptrauth instruction trap. * A fix to add kern_hyp_va to get correct host_ctxt pointer in nVHE mode. * Patches re-structured to better reflect ABI change. Changes since v5 [7]: Major changes are listed below. * Split hcr_el2 and mdcr_el2 save/restore in two patches. * Reverted back save/restore of sys-reg keys as done in V4 [5]. There was suggestion by James Morse to use ptrauth utilities in a single place in arm core and use them from kvm. However this change deviates from the existing sys-reg implementations and is not scalable. * Invoked the key switch C functions from __guest_enter/__guest_exit assembly. * Host key save is now done inside vcpu_load. * Reverted back masking of cpufeature ID registers for ptrauth when disabled from userpace. * Reset of ptrauth key registers not done conditionally. * Code and Documentation cleanup. Changes since v4 [6]: Several suggestions from James Morse * Move host registers to be saved/restored inside struct kvm_cpu_context. * Similar to hcr_el2, save/restore mdcr_el2 register also. * Added save routines for ptrauth keys in generic arm core and use them during KVM context switch. * Defined a GCC attribute __no_ptrauth which discards generating ptrauth instructions in a function. This is taken from Kristina's earlier kernel pointer authentication support patches [4]. * Dropped a patch to mask cpufeature when not enabled from userspace and now only key registers are masked from register list. Changes since v3 [5]: * Use pointer authentication only when VHE is present as ARM8.3 implies ARM8.1 features to be present. * Added lazy context handling of ptrauth instructions from V2 version again. * Added more details in Documentation. Changes since v2 [1,2]: * Allow host and guest to have different HCR_EL2 settings and not just constant value HCR_HOST_VHE_FLAGS or HCR_HOST_NVHE_FLAGS. * Optimise the reading of HCR_EL2 in host/guest switch by fetching it once during KVM initialisation state and using it later. * Context switch pointer authentication keys when switching between guest and host. Pointer authentication was enabled in a lazy context earlier[2] and is removed now to make it simple. However it can be revisited later if there is significant performance issue. * Added a userspace option to choose pointer authentication. * Based on the userspace option, ptrauth cpufeature will be visible. * Based on the userspace option, ptrauth key registers will be accessible. * A small document is added on how to enable pointer authentication from userspace KVM API. Looking for feedback and comments. Thanks, Amit [1]: https://lore.kernel.org/lkml/20171127163806.31435-11-mark.rutland@xxxxxxx/ [2]: https://lore.kernel.org/lkml/20171127163806.31435-10-mark.rutland@xxxxxxx/ [3]: https://lkml.org/lkml/2018/12/7/666 [4]: https://lore.kernel.org/lkml/20181005084754.20950-1-kristina.martsenko@xxxxxxx/ [5]: https://lkml.org/lkml/2018/10/17/594 [6]: https://lkml.org/lkml/2018/12/18/80 [7]: https://lkml.org/lkml/2019/1/28/49 [8]: https://lkml.org/lkml/2019/2/19/190 [9]: https://lkml.org/lkml/2019/3/19/125 [10]: https://patchwork.kernel.org/patch/10860139/ [11]: https://patchwork.kernel.org/patch/10860141/ Linux (5.1-rc3 based): Amit Daniel Kachhap (4): KVM: arm64: Move hyp_symbol_addr to fix dependency KVM: arm/arm64: preserve host MDCR_EL2 value KVM: arm64: Add vcpu feature flags to control ptrauth accessibility KVM: arm64: Add capability to advertise ptrauth for guest Dave Martin (2): KVM: arm64: Propagate vcpu into read_id_reg() KVM: arm64: Support runtime sysreg visibility filtering Mark Rutland (2): KVM: arm/arm64: preserve host HCR_EL2 value KVM: arm/arm64: context-switch ptrauth registers Documentation/arm64/pointer-authentication.txt | 19 ++++- Documentation/virtual/kvm/api.txt | 7 ++ arch/arm/include/asm/kvm_host.h | 4 +- arch/arm64/Kconfig | 5 +- arch/arm64/include/asm/kvm_asm.h | 22 ++++- arch/arm64/include/asm/kvm_emulate.h | 24 +++--- arch/arm64/include/asm/kvm_host.h | 46 +++++++++-- arch/arm64/include/asm/kvm_hyp.h | 2 +- arch/arm64/include/asm/kvm_mmu.h | 20 ----- arch/arm64/include/asm/kvm_ptrauth_asm.h | 106 +++++++++++++++++++++++++ arch/arm64/include/uapi/asm/kvm.h | 2 + arch/arm64/kernel/asm-offsets.c | 6 ++ arch/arm64/kvm/debug.c | 28 ++----- arch/arm64/kvm/guest.c | 16 +++- arch/arm64/kvm/handle_exit.c | 24 ++++-- arch/arm64/kvm/hyp/debug-sr.c | 5 -- arch/arm64/kvm/hyp/entry.S | 7 ++ arch/arm64/kvm/hyp/switch.c | 40 +++++----- arch/arm64/kvm/hyp/sysreg-sr.c | 22 ++++- arch/arm64/kvm/hyp/tlb.c | 6 +- arch/arm64/kvm/reset.c | 13 +++ arch/arm64/kvm/sys_regs.c | 93 ++++++++++++++++++---- arch/arm64/kvm/sys_regs.h | 25 ++++++ include/uapi/linux/kvm.h | 2 + virt/kvm/arm/arm.c | 4 +- 25 files changed, 424 insertions(+), 124 deletions(-) create mode 100644 arch/arm64/include/asm/kvm_ptrauth_asm.h kvmtool: Repo: git.kernel.org/pub/scm/linux/kernel/git/will/kvmtool.git Amit Daniel Kachhap (1): KVM: arm/arm64: Add a vcpu feature for pointer authentication arm/aarch32/include/kvm/kvm-cpu-arch.h | 1 + arm/aarch64/include/asm/kvm.h | 2 ++ arm/aarch64/include/kvm/kvm-config-arch.h | 4 +++- arm/aarch64/include/kvm/kvm-cpu-arch.h | 2 ++ arm/include/arm-common/kvm-config-arch.h | 1 + arm/kvm-cpu.c | 7 +++++++ include/linux/kvm.h | 2 ++ 7 files changed, 18 insertions(+), 1 deletion(-) -- 2.7.4 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
