Re: [RFC PATCH] KVM: arm/arm64: Enable direct irqfd MSI injection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

On 2019/3/19 18:01, Marc Zyngier wrote:
On Tue, 19 Mar 2019 09:09:43 +0800
Zenghui Yu <yuzenghui@xxxxxxxxxx> wrote:

Hi all,

On 2019/3/18 3:35, Marc Zyngier wrote:
A first approach would be to keep a small cache of the last few
successful translations for this ITS, cache that could be looked-up by
holding a spinlock instead. A hit in this cache could directly be
injected. Any command that invalidates or changes anything (DISCARD,
INV, INVALL, MAPC with V=0, MAPD with V=0, MOVALL, MOVI) should nuke
the cache altogether.

Of course, all of that needs to be quantified.

Thanks for all of your explanations, especially for Marc's suggestions!
It took me long time to figure out my mistakes, since I am not very
familiar with the locking stuff. Now I have to apologize for my noise.

No need to apologize. The whole point of this list is to have
discussions. Although your approach wasn't working, you did
identify potential room for improvement.

As for the its-translation-cache code (a really good news to us), we
have a rough look at it and start testing now!

Please let me know about your findings. My initial test doesn't show
any improvement, but that could easily be attributed to the system I
running this on (a tiny and slightly broken dual A53 system). The sizing
of the cache is also important: too small, and you have the overhead of
the lookup for no benefit; too big, and you waste memory.

Not smoothly as expected. With below config (in the form of XML):

---8<---
    <interface type='vhostuser'>
      <source type='unix' path='/var/run/vhost-user/tap_0' mode='client'/>
      <model type='virtio'/>
      <driver name='vhost' queues='32' vringbuf='4096'/>
    </interface>
---8<---

VM can't even get to boot successfully!


Kernel version is -stable 4.19.28. And *dmesg* on host shows:

---8<---
[  507.908330] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 507.908338] rcu: 35-...0: (0 ticks this GP) idle=d06/1/0x4000000000000000 softirq=72150/72150 fqs=6269 [ 507.908341] rcu: 41-...0: (0 ticks this GP) idle=dee/1/0x4000000000000000 softirq=68144/68144 fqs=6269
[  507.908342] rcu:     (detected by 23, t=15002 jiffies, g=68929, q=408641)
[  507.908350] Task dump for CPU 35:
[ 507.908351] qemu-kvm R running task 0 66789 1 0x00000002
[  507.908354] Call trace:
[  507.908360]  __switch_to+0x94/0xe8
[  507.908363]  _cond_resched+0x24/0x68
[  507.908366]  __flush_work+0x58/0x280
[  507.908369]  free_unref_page_commit+0xc4/0x198
[  507.908370]  free_unref_page+0x84/0xa0
[  507.908371]  __free_pages+0x58/0x68
[  507.908372]  free_pages.part.21+0x34/0x40
[  507.908373]  free_pages+0x2c/0x38
[  507.908375]  poll_freewait+0xa8/0xd0
[  507.908377]  do_sys_poll+0x3d0/0x560
[  507.908378]  __arm64_sys_ppoll+0x180/0x1e8
[  507.908380]  0xa48990
[  507.908381] Task dump for CPU 41:
[ 507.908382] kworker/41:1 R running task 0 647 2 0x0000002a
[  507.908387] Workqueue: events irqfd_inject
[  507.908389] Call trace:
[  507.908391]  __switch_to+0x94/0xe8
[  507.908392]  0x200000131
[... ...]
[  687.928330] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 687.928339] rcu: 35-...0: (0 ticks this GP) idle=d06/1/0x4000000000000000 softirq=72150/72150 fqs=25034 [ 687.928341] rcu: 41-...0: (0 ticks this GP) idle=dee/1/0x4000000000000000 softirq=68144/68144 fqs=25034 [ 687.928343] rcu: (detected by 16, t=60007 jiffies, g=68929, q=1601093)
[  687.928351] Task dump for CPU 35:
[ 687.928352] qemu-kvm R running task 0 66789 1 0x00000002
[  687.928355] Call trace:
[  687.928360]  __switch_to+0x94/0xe8
[  687.928364]  _cond_resched+0x24/0x68
[  687.928367]  __flush_work+0x58/0x280
[  687.928369]  free_unref_page_commit+0xc4/0x198
[  687.928370]  free_unref_page+0x84/0xa0
[  687.928372]  __free_pages+0x58/0x68
[  687.928373]  free_pages.part.21+0x34/0x40
[  687.928374]  free_pages+0x2c/0x38
[  687.928376]  poll_freewait+0xa8/0xd0
[  687.928378]  do_sys_poll+0x3d0/0x560
[  687.928379]  __arm64_sys_ppoll+0x180/0x1e8
[  687.928381]  0xa48990
[  687.928382] Task dump for CPU 41:
[ 687.928383] kworker/41:1 R running task 0 647 2 0x0000002a
[  687.928389] Workqueue: events irqfd_inject
[  687.928391] Call trace:
[  687.928392]  __switch_to+0x94/0xe8
[  687.928394]  0x200000131
[...]
---8<---   endlessly ...

It seems that we've suffered from some locking related issues. Any
suggestions for debugging?

And could you please provide your test steps ? So that I can run
some tests on my HW to see improvement hopefully.


Having thought about it a bit more, I think we can drop the
invalidation on MOVI/MOVALL, as the LPI is still perfectly valid, and
we don't cache the target vcpu. On the other hand, the cache must be
nuked when the ITS is turned off.

All of these are valuable. But it might be early for me to consider
about them (I have to get the above problem solved first ...)


thanks,

zenghui


Thanks,

	M.


_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux