Since PCI forbids enabling INTx, MSI or MSIX at the same time, it's by
default to disable INTx mode when enable MSI/MSIX mode; but this logic is
easily broken if the guest PCI driver detects the MSI/MSIX cannot work as
expected and tries to rollback to use INTx mode. The INTx mode has been
disabled and it has no chance to be enabled again, thus both INTx mode
and MSI/MSIX mode will not be enabled in vfio for this case.
Below shows the detailed flow for introducing this issue:
vfio_pci_configure_dev_irqs()
`-> vfio_pci_enable_intx()
vfio_pci_enable_msis()
`-> vfio_pci_disable_intx()
vfio_pci_disable_msis() => Guest PCI driver disables MSI
To fix this issue, when disable MSI/MSIX we need to check if INTx mode
is available for this device or not; if the device can support INTx then
we need to re-enable it so the device can fallback to use it.
Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
---
vfio/pci.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/vfio/pci.c b/vfio/pci.c
index c0683f6..44727bb 100644
--- a/vfio/pci.c
+++ b/vfio/pci.c
@@ -28,6 +28,7 @@ struct vfio_irq_eventfd {
msi_update_state(state, val, VFIO_PCI_MSI_STATE_EMPTY)
static void vfio_pci_disable_intx(struct kvm *kvm, struct vfio_device *vdev);
+static int vfio_pci_enable_intx(struct kvm *kvm, struct vfio_device *vdev);
static int vfio_pci_enable_msis(struct kvm *kvm, struct vfio_device *vdev,
bool msix)
@@ -50,7 +51,7 @@ static int vfio_pci_enable_msis(struct kvm *kvm, struct vfio_device *vdev,
if (!msi_is_enabled(msis->virt_state))
return 0;
- if (pdev->irq_modes & VFIO_PCI_IRQ_MODE_INTX) {
+ if (pdev->irq_modes & VFIO_PCI_IRQ_MODE_INTX)
/*
* PCI (and VFIO) forbids enabling INTx, MSI or MSIX at the same
* time. Since INTx has to be enabled from the start (we don't
@@ -58,9 +59,6 @@ static int vfio_pci_enable_msis(struct kvm *kvm, struct vfio_device *vdev,
* disable it now.
*/
vfio_pci_disable_intx(kvm, vdev);
- /* Permanently disable INTx */
- pdev->irq_modes &= ~VFIO_PCI_IRQ_MODE_INTX;
- }
eventfds = (void *)msis->irq_set + sizeof(struct vfio_irq_set);
@@ -162,7 +160,16 @@ static int vfio_pci_disable_msis(struct kvm *kvm, struct vfio_device *vdev,
msi_set_enabled(msis->phys_state, false);
msi_set_empty(msis->phys_state, true);
- return 0;
+ if (pdev->irq_modes & VFIO_PCI_IRQ_MODE_INTX)
+ /*
+ * When MSI or MSIX is disabled, this might be called when
+ * PCI driver detects the MSI interrupt failure and wants to
+ * rollback to INTx mode. Thus enable INTx if the device
+ * supports INTx mode in this case.
+ */
+ ret = vfio_pci_enable_intx(kvm, vdev);
+
+ return ret >= 0 ? 0 : ret;
}
static int vfio_pci_update_msi_entry(struct kvm *kvm, struct vfio_device *vdev,
--
2.19.1
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
