On Tue, 12 Mar 2019 at 06:10, Heyi Guo <guoheyi@xxxxxxxxxx> wrote:
>
> When we stop a VM for more than 30 seconds and then resume it, by qemu
> monitor command "stop" and "cont", Linux on VM will complain of "soft
> lockup - CPU#x stuck for xxs!" as below:
>
> [ 2783.809517] watchdog: BUG: soft lockup - CPU#3 stuck for 2395s!
> [ 2783.809559] watchdog: BUG: soft lockup - CPU#2 stuck for 2395s!
> [ 2783.809561] watchdog: BUG: soft lockup - CPU#1 stuck for 2395s!
> [ 2783.809563] Modules linked in...
>
> This is because Guest Linux uses generic timer virtual counter as
> a software watchdog, and CNTVCT_EL0 does not stop when VM is stopped
> by qemu.
>
> This patch is to fix this issue by saving the value of CNTVCT_EL0 when
> stopping and restoring it when resuming.
Hi -- I know we have issues with the passage of time in Arm VMs
running under KVM when the VM is suspended, but the topic is
a tricky one, and it's not clear to me that this is the correct
way to fix it. I would prefer to see us start with a discussion
on the kvm-arm mailing list about the best approach to the problem.
I've cc'd that list and a couple of the Arm KVM maintainers
for their opinion.
QEMU patch left below for context -- the brief summary is that
it uses KVM_GET_ONE_REG/KVM_SET_ONE_REG on the timer CNT register
to save it on VM pause and write that value back on VM resume.
thanks
-- PMM
> Cc: Peter Maydell <peter.maydell@xxxxxxxxxx>
> Signed-off-by: Heyi Guo <guoheyi@xxxxxxxxxx>
> ---
> target/arm/cpu.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 65 insertions(+)
>
> diff --git a/target/arm/cpu.c b/target/arm/cpu.c
> index 96f0ff0..7bbba3d 100644
> --- a/target/arm/cpu.c
> +++ b/target/arm/cpu.c
> @@ -896,6 +896,60 @@ static void arm_cpu_finalizefn(Object *obj)
> #endif
> }
>
> +static int get_vcpu_timer_tick(CPUState *cs, uint64_t *tick_at_pause)
> +{
> + int err;
> + struct kvm_one_reg reg;
> +
> + reg.id = KVM_REG_ARM_TIMER_CNT;
> + reg.addr = (uintptr_t) tick_at_pause;
> +
> + err = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, ®);
> + return err;
> +}
> +
> +static int set_vcpu_timer_tick(CPUState *cs, uint64_t tick_at_pause)
> +{
> + int err;
> + struct kvm_one_reg reg;
> +
> + reg.id = KVM_REG_ARM_TIMER_CNT;
> + reg.addr = (uintptr_t) &tick_at_pause;
> +
> + err = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, ®);
> + return err;
> +}
> +
> +static void arch_timer_change_state_handler(void *opaque, int running,
> + RunState state)
> +{
> + static uint64_t hw_ticks_at_paused;
> + static RunState pre_state = RUN_STATE__MAX;
> + int err;
> + CPUState *cs = (CPUState *)opaque;
> +
> + switch (state) {
> + case RUN_STATE_PAUSED:
> + err = get_vcpu_timer_tick(cs, &hw_ticks_at_paused);
> + if (err) {
> + error_report("Get vcpu timer tick failed: %d", err);
> + }
> + break;
> + case RUN_STATE_RUNNING:
> + if (pre_state == RUN_STATE_PAUSED) {
> + err = set_vcpu_timer_tick(cs, hw_ticks_at_paused);
> + if (err) {
> + error_report("Resume vcpu timer tick failed: %d", err);
> + }
> + }
> + break;
> + default:
> + break;
> + }
> +
> + pre_state = state;
> +}
> +
> static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
> {
> CPUState *cs = CPU(dev);
> @@ -906,6 +960,12 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
> Error *local_err = NULL;
> bool no_aa32 = false;
>
> + /*
> + * Only add change state handler for arch timer once, for KVM will help to
> + * synchronize virtual timer of all VCPUs.
> + */
> + static bool arch_timer_change_state_handler_added;
> +
> /* If we needed to query the host kernel for the CPU features
> * then it's possible that might have failed in the initfn, but
> * this is the first point where we can report it.
> @@ -1181,6 +1241,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
>
> init_cpreg_list(cpu);
>
> + if (!arch_timer_change_state_handler_added && kvm_enabled()) {
> + qemu_add_vm_change_state_handler(arch_timer_change_state_handler, cs);
> + arch_timer_change_state_handler_added = true;
> + }
> +
> #ifndef CONFIG_USER_ONLY
> if (cpu->has_el3 || arm_feature(env, ARM_FEATURE_M_SECURITY)) {
> cs->num_ases = 2;
> --
> 1.8.3.1
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
