On 2/4/19 2:39 PM, Andrew Jones wrote:
> On Mon, Feb 04, 2019 at 01:44:07PM +0000, Alexandru Elisei wrote:
>> kvm-unit-tests is designed to be run with QEMU as the virtual machine
>> monitor. It relies on devices emulated by QEMU (like isa-debug-exit or
>> testdev) and it makes certain assumptions based on the implicit QEMU
>> virtual environment configuration (like the serial base address).
>>
>> kvmtool [1] is a lightweight virtual machine monitor for running KVM
>> guests. kvmtool has reduced complexity compared to QEMU and is easily
>> hackable.
>>
>> This patch series aims to make it possible to run kvm-unit-tests using
>> kvmtool on the arm and arm64 architectures, with two caveats:
>>
>> (1) When terminating a test, the userspace process won't exit with an exit
>> code that signals the success or failure of the test. Output from the test
>> can still be parsed to determine the outcome of the test.
>>
>> (2) kvmtool has been designed to work with a linux guest and it
>> automatically generates the command line arguments for a Linux kernel. The
>> arm/arm64 selftest and gic tests will fail if unexpected command line
>> arguments are found. To get around this limitation, the test binary needs
>> to be loaded using the --firmware option introduced by kvmtool in commit
>> 5e4b563d75b9 ("arm: Allow command line for firmware"). This option
>> suppresses the automatic kernel command line and can be used to run all
>> tests, not just the tests that require specific arguments.
>>
>> The run scripts haven't been modified. To run a test under kvmtool, one
>> needs to launch kvmtool manually. For example, to run the timer test the
>> following command can be used:
>>
>> lkvm run --cpus 1 --console serial --firmware timer.flat.
>>
>> To run the gicv3-ipi test:
>>
>> lkvm run --cpus 8 --console serial --params "ipi" --irqchip gicv3 \
>> --firmware gic.flat
> This looks good to me. I tested with lkvm and saw that all tests were able
> to run and pass, except pci-test since lkvm doesn't have pci-testdev. The
> only other issue was selftest.vectors-user which ends in user mode and
> thus can't make the PSCI call to exit. The following patch can get that
> to work if lkvm users want it
>
> diff --git a/arm/selftest.c b/arm/selftest.c
> index ea5101ef7217..7ba3f02a9b9d 100644
> --- a/arm/selftest.c
> +++ b/arm/selftest.c
> @@ -272,10 +272,18 @@ static bool check_svc(void)
> }
> #endif
>
> +static void user_psci_off(struct pt_regs *regs, unsigned int esr)
> +{
> + psci_system_off();
I was wondering if it's worth checking that the cause for the unknown exception
was actually the instruction hvc #0 from user space. Getting the function id
from x0/r0 is trivial, and we could also check the opcode from the memory
location pointed to by the pc.
> + halt();
> +}
> +
> static void check_vectors(void *arg __unused)
> {
> report("und", check_und());
> report("svc", check_svc());
> + if (is_user())
> + install_exception_handler(EL0_SYNC_64, ESR_EL1_EC_UNKNOWN, user_psci_off);
> exit(report_summary());
> }
Thank you for posting this, when I started playing with kvm-unit-tests I noticed
that selftest-vectors-user isn't working, but I totally forgot about it. I am
interested in the patch, do you want to write the patch yourself? If not, I can
pick it up and submit it.
>
>
> Anyway, thanks for submitting these patches to enable another user of
> kvm-unit-tests.
>
> drew
>
>
>> Changes in v3:
>> * Updated cover letter with information about the kvmtool --firmware
>> option.
>> * Gathered Reviewed-by tags.
>> * Renamed the config.h define UART_EARLY_BASE to CONFIG_UART_EARLY_BASE and
>> made the necessary casts in lib/arm/io.c
>>
>> Changes in v2:
>> * Generate lib/config.h when configuring kvm-unit-tests; arm/arm64 uses it
>> to get the UART address.
>> * Added --vmm configure option for arm/arm64 which will set the UART
>> address in lib/config.h when the tests are run under QEMU or kvmtool.
>> * Renamed psci_sys_reset() to psci_system_reset().
>> * Dropped patches that allowed a test to ignore unexpected command line
>> arguments.
>>
>> Summary:
>> * Patches 1, 2 and 3 add support for configuring kvm-unit-tests on arm and
>> arm64 to use the ns16550a UART emulated by kvmtool.
>> * Patches 4 and 5 provide an alternative mechanism for terminating the
>> virtual machine by using PSCI.
>>
>> [1] https://git.kernel.org/pub/scm/linux/kernel/git/will/kvmtool.git/
>> [2] https://www.spinics.net/lists/kvm-arm/msg34352.html
>>
>> Alexandru Elisei (5):
>> lib: arm: Use UART address from generated config.h
>> configure: arm/arm64: Add --vmm option with no effect
>> lib: arm: Use ns16550a UART when --vmm=kvmtool
>> lib: arm: Implement PSCI SYSTEM_OFF in psci_system_off()
>> lib: arm: Fallback to psci_system_off() in exit()
>>
>> configure | 32 ++++++++++++++++++++++++++++++++
>> Makefile | 2 +-
>> lib/arm/asm/psci.h | 3 ++-
>> lib/arm/io.c | 41 ++++++++++++++++++++++++++---------------
>> lib/arm/psci.c | 8 +++++++-
>> .gitignore | 1 +
>> 6 files changed, 69 insertions(+), 18 deletions(-)
>>
>> --
>> 2.17.0
>>
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
