On Tue, Jan 29, 2019 at 11:16:05AM +0000, Alexandru Elisei wrote:
> On 1/28/19 4:31 PM, Andrew Jones wrote:
> > On Mon, Jan 28, 2019 at 02:24:29PM +0000, Alexandru Elisei wrote:
> >> On 1/25/19 4:47 PM, Andrew Jones wrote:
> >>> On Fri, Jan 25, 2019 at 04:36:13PM +0000, Alexandru Elisei wrote:
> >>>> On 1/24/19 12:37 PM, Andrew Jones wrote:
> >>>>> On Thu, Jan 24, 2019 at 11:59:43AM +0000, Andre Przywara wrote:
> >>>>>> On Thu, 24 Jan 2019 11:16:29 +0000
> >>>>>> Alexandru Elisei <alexandru.elisei@xxxxxxx> wrote:
> >>>>>>
> >>>>>>> A warning is displayed if uart0_base is different from what the code
> >>>>>>> expects qemu to generate for the pl011 UART in the device tree.
> >>>>>>> However, now we support the ns16550a UART emulated by kvmtool, which
> >>>>>>> has a different address. This leads to the warning being displayed
> >>>>>>> even though the UART is configured and working as expected.
> >>>>>>>
> >>>>>>> Now that we support multiple UARTs, the warning serves no purpose, so
> >>>>>>> remove it.
> >>>>>> Mmh, but we use that address before, right? So for anything not
> >>>>>> emulating an UART at this QEMU specific address we write to some random
> >>>>>> (device) memory?
> >>>>>>
> >>>>>> Drew, how important is this early print feature for kvm-unit-tests?
> >>>>> The setup code passes through quite a few asserts before getting through
> >>>>> io_init() (including in uart0_init), so I think there's still value in
> >>>>> having a guessed UART address. Maybe we can provide guesses for both
> >>>>> QEMU and kvmtool, and some selection method, that would be used until
> >>>>> we've properly assigned uart0_base from DT?
> >>>>>
> >>>>>> Cheers,
> >>>>>> Andre.
> >>>>>>
> >>>>>>> Signed-off-by: Alexandru Elisei <alexandru.elisei@xxxxxxx>
> >>>>>>> ---
> >>>>>>> lib/arm/io.c | 6 ------
> >>>>>>> 1 file changed, 6 deletions(-)
> >>>>>>>
> >>>>>>> diff --git a/lib/arm/io.c b/lib/arm/io.c
> >>>>>>> index 35fc05aeb4db..87435150f73e 100644
> >>>>>>> --- a/lib/arm/io.c
> >>>>>>> +++ b/lib/arm/io.c
> >>>>>>> @@ -61,12 +61,6 @@ static void uart0_init(void)
> >>>>>>> }
> >>>>>>>
> >>>>>>> uart0_base = ioremap(base.addr, base.size);
> >>>>>>> -
> >>>>>>> - if (uart0_base != (u8 *)UART_EARLY_BASE) {
> >>>>>>> - printf("WARNING: early print support may not work. "
> >>>>>>> - "Found uart at %p, but early base is %p.\n",
> >>>>>>> - uart0_base, (u8 *)UART_EARLY_BASE);
> >>>>>>> - }
> >>>>>>> }
> >>>>> This warning is doing what it should, which is pointing out that the
> >>>>> UART_EARLY_BASE guess appears to be wrong. If we can provide a way
> >>>>> to support more than one guess, then we should keep this warning but
> >>>>> adjust it to match one of any of the guesses.
> >>>>>
> >>>>> Thanks,
> >>>>> drew
> >>>> I'm not really sure how to implement a selection method. I've looked at
> >>>> splitting io_init() into uart0_init() and chr_testdev_init() and calling
> >>>> uart0_init() very early in the setup process, but uart0_init() itself uses
> >>>> printf() and assert().
> >>>>
> >>>> I've also thought about adding another function, something like
> >>>> uart0_early_init(), that is called very early in setup() and gets the base
> >>>> address from the dtb bootargs. But that means calling dt_init() and
> >>>> dt_get_bootargs(), which can fail.
> >>>>
> >>>> One other option that could work is to make it a compile-time configuration.
> >>>>
> >>>> What do you think?
> >>>>
> >>> Compile-time is fine, which I guess will result in a new configure script
> >>> option as well. I wonder if we shouldn't consider generating a config.h
> >>> file with stuff like this rather than adding another -D to the compile
> >>> line.
> >>>
> >>> drew
> >> I propose a new configuration option called --vmm, with possible values qemu and
> >> kvmtool, which defaults to qemu if not set.
> >>
> >> Another possibility would be to have an --uart-base option, but that means we
> >> are expecting the user to be aware of the uart base address for the virtual
> >> machine manager, which might be unreasonable.
> >>
> >> This is a quick prototype of how using -D for conditional compilation would look
> >> like (the configure changes are included too):
> >>
> >> diff --git a/configure b/configure
> >> index df8581e3a906..7a56ba47707f 100755
> >> --- a/configure
> >> +++ b/configure
> >> @@ -70,6 +70,9 @@ while [[ "$1" = -* ]]; do
> >> ;;
> >> --ld)
> >> ld="$arg"
> >> + ;;
> >> + --vmm)
> >> + vmm="$arg"
> >> ;;
> >> --enable-pretty-print-stacks)
> >> pretty_print_stacks=yes
> >> @@ -108,6 +111,14 @@ if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
> >> testdir=x86
> >> elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
> >> testdir=arm
> >> + if [ -z "$vmm" ] || [ "$vmm" = "qemu" ]; then
> >> + uart_early_base=0x09000000UL
> > You can drop the 'UL'.
> >
> >> + elif [ "$vmm" = "kvmtool" ]; then
> >> + uart_early_base=0x3f8
> >> + else
> >> + echo '--vmm must be one of "qemu" or "kvmtool"'
> >> + usage
> > You're outputting usage here, but you didn't add vmm to the help text.
> >
> >> + fi
> >> elif [ "$arch" = "ppc64" ]; then
> >> testdir=powerpc
> >> firmware="$testdir/boot_rom.bin"
> >> @@ -197,4 +208,5 @@ PRETTY_PRINT_STACKS=$pretty_print_stacks
> >> ENVIRON_DEFAULT=$environ_default
> >> ERRATATXT=errata.txt
> >> U32_LONG_FMT=$u32_long
> >> +UART_EARLY_BASE=$uart_early_base
> >> EOF
> >> diff --git a/Makefile b/Makefile
> >> index e9f02272e156..225c2a525cdf 100644
> >> --- a/Makefile
> >> +++ b/Makefile
> >> @@ -72,6 +72,10 @@ COMMON_CFLAGS += $(fno_pic) $(no_pie)
> >> CFLAGS += $(COMMON_CFLAGS)
> >> CFLAGS += -Wmissing-parameter-type -Wold-style-declaration -Woverride-init
> >>
> >> +ifneq ($(UART_EARLY_BASE),)
> >> +CFLAGS += -DUART_EARLY_BASE=$(UART_EARLY_BASE)
> >> +endif
> > This type of thing is what I would like to avoid by introducing a
> > config.h file. In the least we shouldn't add this -D to CFLAGS for
> > all architectures. It can be added to the %.elf rule in
> > arm/Makefile.common
> >
> >> +
> >> CXXFLAGS += $(COMMON_CFLAGS)
> >>
> >> autodepend-flags = -MMD -MF $(dir $*).$(notdir $*).d
> >>
> > You'll also want to patch lib/arm/io.c with
> >
> > -/*
> > - * Use this guess for the pl011 base in order to make an attempt at
> > - * having earlier printf support. We'll overwrite it with the real
> > - * base address that we read from the device tree later. This is
> > - * the address we expect QEMU's mach-virt machine type to put in
> > - * its generated device tree.
> > - */
> > -#define UART_EARLY_BASE 0x09000000UL
> > -
> > static struct spinlock uart_lock;
> > -static volatile u8 *uart0_base = (u8 *)UART_EARLY_BASE;
> > +static volatile u8 *uart0_base = (u8 *)(unsigned long)UART_EARLY_BASE;
> >
> >
> >
> > This is all a bit on the ugly side, but I can't think of anything
> > better.
> >
> > Thanks,
> > drew
>
> I've also tried doing it by generating config.h This is what I came up with:
>
> diff --git a/configure b/configure
> index df8581e3a906..d77b8b0d82fa 100755
> --- a/configure
> +++ b/configure
> @@ -16,6 +16,7 @@ endian=""
> pretty_print_stacks=yes
> environ_default=yes
> u32_long=
> +vmm=qemu
>
> usage() {
> cat <<-EOF
> @@ -23,6 +24,8 @@ usage() {
>
> Options include:
> --arch=ARCH architecture to compile for ($arch)
> + --vmm=VMM virtual machine monitor to compile for (qemu
> or kvmtool,
Long line?
> + arm/arm64 only, default is qemu)
Why arm/arm64 only? No plans to use kvmtool for x86 tests?
> --processor=PROCESSOR processor to compile for ($arch)
> --cross-prefix=PREFIX cross compiler prefix
> --cc=CC c compiler to use ($cc)
> @@ -71,6 +74,9 @@ while [[ "$1" = -* ]]; do
> --ld)
> ld="$arg"
> ;;
> + --vmm)
> + vmm="$arg"
> + ;;
> --enable-pretty-print-stacks)
> pretty_print_stacks=yes
> ;;
> @@ -108,6 +114,14 @@ if [ "$arch" = "i386" ] || [ "$arch" = "x86_64" ]; then
> testdir=x86
> elif [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
> testdir=arm
> + if [ "$vmm" = "qemu" ]; then
> + uart_early_base=0x09000000
> + elif [ "$vmm" = "kvmtool" ]; then
> + uart_early_base=0x3f8
> + else
> + echo '--vmm must be one of "qemu" or "kvmtool"'
> + usage
Checking the vmm is qemu or kvmtool can be moved out of the if-arm block
if we decide it can be for other architectures. If uart_early_base is only
and arm thing, then 'arm' should probably be in its name. Could also
rename 'base' to 'addr' to accommodate ioports.
> + fi
> elif [ "$arch" = "ppc64" ]; then
> testdir=powerpc
> firmware="$testdir/boot_rom.bin"
> @@ -198,3 +212,16 @@ ENVIRON_DEFAULT=$environ_default
> ERRATATXT=errata.txt
> U32_LONG_FMT=$u32_long
> EOF
> +
> +cat <<EOF > lib/config.h
> +#ifndef CONFIG_H
> +#define CONFIG_H 1
Should add a header stating this is a generated file like
make_asm_offsets has in scripts/asm-offsets.mak
> +EOF
> +if [ "$arch" = "arm" ] || [ "$arch" = "arm64" ]; then
> +cat <<EOF >> lib/config.h
> +#define UART_EARLY_BASE ${uart_early_base}UL
Drop the 'UL'. If somebody attempted to supply it themselves it'd end up
being ULUL. Just add another cast to where the value gets used to handle
the type.
> +EOF
> +fi
> +cat <<EOF >> lib/config.h
> +#endif
> +EOF
The one line appends could use 'echo' to take 2 less lines each.
> diff --git a/lib/arm/io.c b/lib/arm/io.c
> index 9fe9bd0bf659..0a3e8f237ab8 100644
> --- a/lib/arm/io.c
> +++ b/lib/arm/io.c
> @@ -11,6 +11,7 @@
> #include <libcflat.h>
> #include <devicetree.h>
> #include <chr-testdev.h>
> +#include <config.h>
> #include "arm/asm/psci.h"
> #include <asm/spinlock.h>
> #include <asm/io.h>
> @@ -21,15 +22,6 @@ extern void halt(int code);
>
> static bool testdev_enabled;
>
> -/*
> - * Use this guess for the pl011 base in order to make an attempt at
> - * having earlier printf support. We'll overwrite it with the real
> - * base address that we read from the device tree later. This is
> - * the address we expect QEMU's mach-virt machine type to put in
> - * its generated device tree.
> - */
> -#define UART_EARLY_BASE 0x09000000UL
> -
> static struct spinlock uart_lock;
> static volatile u8 *uart0_base = (u8 *)UART_EARLY_BASE;
>
> Putting config.h in lib makes it available for other architectures, in case they
> want to implement something similar. Please suggest another location if there is
> a better one.
>
> I think this looks better than using architecture-specific compile-time defines
> buried in arm/Makefile.common, what do you think?
>
Yes, I agree this looks better. You'll probably want to add a
lib/.gitignore for the file too and also remove it when
'make distclean' is run.
Thanks,
drew
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
