Hi Michael, On 11/27/18 6:16 PM, Michael S. Tsirkin wrote: > On Tue, Nov 27, 2018 at 06:09:25PM +0100, Auger Eric wrote: >> Hi Michael, >> >> On 11/27/18 5:53 PM, Michael S. Tsirkin wrote: >>> On Thu, Nov 22, 2018 at 07:37:54PM +0000, Jean-Philippe Brucker wrote: >>>> Implement the virtio-iommu driver, following specification v0.9 [1]. >>>> >>>> Since v4 [2] I fixed the issues reported by Eric, and added Reviewed-by >>>> from Eric and Rob. Thanks! >>>> >>>> I changed the specification to fix one inconsistency discussed in v4. >>>> That the device fills the probe buffer with zeroes is now a "SHOULD" >>>> instead of a "MAY", since it's the only way for the driver to know if >>>> the device wrote the status. Existing devices already do this. In >>>> addition the device now needs to fill the three padding bytes at the >>>> tail with zeroes. >>>> >>>> You can find Linux driver and kvmtool device on branches >>>> virtio-iommu/v0.9 [3]. I also lightly tested with Eric's latest QEMU >>>> device [4]. >>> >>> I tried to get this to work on my x86 box but without >>> success. Any hints? Does this have to do with the IORT table? >>> I think we really should just reserve our own table ID >>> and avoid the pain of trying to add things to the IORT spec. >>> I'm reluctant to merge lots of code that I can't easily test. >>> Again, if we found a way to push more configuration into >>> virtio config space the problem space would be smaller. >> >> You can at least test it with QEMU ARM virt in TCG mode. > > It's slow enough that I generally just focus on KVM. > >> Then I have >> worked on the IORT integration in PC/Q35 but this is not yet functional. >> I need to debug what's wrong on guest ACPI probing. I plan to work on >> this this week. >> >> Thanks >> >> Eric > > Sounds good. Did you need to make changes to IORT? I don't remember. If > yes it would be very easy to just have a virtio specific ACPI table - > I am assuming ARM guys will be just as hostile to virt changes > to IORT as they were to minor changes to ARM vIOMMU. I eventually succeeded to prototype the IORT integration on x86. Please find below the branches to use for testing: - QEMU: https://github.com/eauger/qemu.git v3.1.0-rc3-virtio-iommu-v0.9-x86 On top of "[RFC v9 00/17] VIRTIO-IOMMU device", I added the IORT build for pc machine - LINUX GUEST: https://github.com/eauger/linux.git virtio-iommu-v0.9-iort-x86 Jean's virtio-iommu/devel branch + 2 hacks (to be discussed separately) Make sure the CONFIG_VIRTIO_IOMMU config is set Used qemu cmd line featuring -device virtio-iommu-pci,addr=0xa: ./x86_64-softmmu/qemu-system-x86_64 -M q35,accel=kvm,usb=off,sata=off,dump-guest-core=off -cpu Haswell,-hle,-rtm -smp 4,sockets=4,cores=1,threads=1 -m 4G -display none --enable-kvm -serial tcp:localhost:4444,server -device virtio-iommu-pci,addr=0xa -trace events=/home/augere/UPSTREAM/qemu/hw-virtio-iommu -qmp unix:/home/augere/TEST/QEMU/qmp-sock,server,nowait -rtc base=utc,driftfix=slew -global kvm-pit.lost_tick_policy=delay -realtime mlock=off -no-hpet -no-shutdown -device virtio-blk-pci,scsi=off,drive=drv0,id=virtio-disk0,bootindex=1,iommu_platform,disable-modern=off,disable-legacy=on -drive file=/home/augere/VM/IMAGES/vm0.qcow2,format=qcow2,if=none,id=drv0 -device virtio-net-pci,bus=pcie.0,netdev=nic0,mac=6a:f5:10:b1:3d:d2,iommu_platform,disable-modern=off,disable-legacy=on -netdev tap,id=nic0,script=/home/augere/TEST/SCRIPTS/qemu-ifup,downscript=/home/augere/TEST/SCRIPTS/qemu-ifdown -kernel /home/augere/VM/BOOT/vmlinuz-4.20.0-rc3-guest-defconfig-virtio-iommu-0.9-x86+ -initrd /home/augere/VM/BOOT/initrd.img-4.20.0-rc3-guest-defconfig-virtio-iommu-0.9-x86+ -append 'root=/dev/mapper/rhel_dhcp156--238-root ro crashkernel=auto rd.lvm.lv=rhel_dhcp156-238/root rd.lvm.lv=rhel_dhcp156-238/swap rw ignore_loglevel console=tty0 console=ttyS0,115200n8 serial acpi=force' -net none -d guest_errors I put sata=off otherwise I have early untranslated transactions that prevent the guest from booting. Please let me know if you encounter any issue reproducing the environment on your side. Thanks Eric > > >>> >>>> [1] Virtio-iommu specification v0.9, sources, pdf and diff from v0.8 >>>> git://linux-arm.org/virtio-iommu.git virtio-iommu/v0.9 >>>> http://jpbrucker.net/virtio-iommu/spec/v0.9/virtio-iommu-v0.9.pdf >>>> http://jpbrucker.net/virtio-iommu/spec/diffs/virtio-iommu-pdf-diff-v0.8-v0.9.pdf >>>> >>>> [2] [PATCH v4 0/7] Add virtio-iommu driver >>>> https://lists.linuxfoundation.org/pipermail/iommu/2018-November/031074.html >>>> >>>> [3] git://linux-arm.org/linux-jpb.git virtio-iommu/v0.9 >>>> git://linux-arm.org/kvmtool-jpb.git virtio-iommu/v0.9 >>>> >>>> [4] [RFC v9 00/17] VIRTIO-IOMMU device >>>> https://www.mail-archive.com/qemu-devel@xxxxxxxxxx/msg575578.html >>>> >>>> Jean-Philippe Brucker (7): >>>> dt-bindings: virtio-mmio: Add IOMMU description >>>> dt-bindings: virtio: Add virtio-pci-iommu node >>>> of: Allow the iommu-map property to omit untranslated devices >>>> PCI: OF: Initialize dev->fwnode appropriately >>>> iommu: Add virtio-iommu driver >>>> iommu/virtio: Add probe request >>>> iommu/virtio: Add event queue >>>> >>>> .../devicetree/bindings/virtio/iommu.txt | 66 + >>>> .../devicetree/bindings/virtio/mmio.txt | 30 + >>>> MAINTAINERS | 7 + >>>> drivers/iommu/Kconfig | 11 + >>>> drivers/iommu/Makefile | 1 + >>>> drivers/iommu/virtio-iommu.c | 1157 +++++++++++++++++ >>>> drivers/of/base.c | 10 +- >>>> drivers/pci/of.c | 7 + >>>> include/uapi/linux/virtio_ids.h | 1 + >>>> include/uapi/linux/virtio_iommu.h | 161 +++ >>>> 10 files changed, 1448 insertions(+), 3 deletions(-) >>>> create mode 100644 Documentation/devicetree/bindings/virtio/iommu.txt >>>> create mode 100644 drivers/iommu/virtio-iommu.c >>>> create mode 100644 include/uapi/linux/virtio_iommu.h >>>> >>>> -- >>>> 2.19.1 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
