Re: [PATCH v3 6/7] iommu/virtio: Add probe request

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fixed all of these, thanks

Jean

On 15/11/2018 13:20, Auger Eric wrote:
> Hi Jean,
> On 10/12/18 4:59 PM, Jean-Philippe Brucker wrote:
>> When the device offers the probe feature, send a probe request for each
>> device managed by the IOMMU. Extract RESV_MEM information. When we
>> encounter a MSI doorbell region, set it up as a IOMMU_RESV_MSI region.
>> This will tell other subsystems that there is no need to map the MSI
>> doorbell in the virtio-iommu, because MSIs bypass it.
>>
>> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
>> ---
>>  drivers/iommu/virtio-iommu.c      | 147 ++++++++++++++++++++++++++++--
>>  include/uapi/linux/virtio_iommu.h |  39 ++++++++
>>  2 files changed, 180 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
>> index 9fb38cd3b727..8eaf66770469 100644
>> --- a/drivers/iommu/virtio-iommu.c
>> +++ b/drivers/iommu/virtio-iommu.c
>> @@ -56,6 +56,7 @@ struct viommu_dev {
>>  	struct iommu_domain_geometry	geometry;
>>  	u64				pgsize_bitmap;
>>  	u8				domain_bits;
>> +	u32				probe_size;
>>  };
>>  
>>  struct viommu_mapping {
>> @@ -77,8 +78,10 @@ struct viommu_domain {
>>  };
>>  
>>  struct viommu_endpoint {
>> +	struct device			*dev;
>>  	struct viommu_dev		*viommu;
>>  	struct viommu_domain		*vdomain;
>> +	struct list_head		resv_regions;
>>  };
>>  
>>  struct viommu_request {
>> @@ -129,6 +132,9 @@ static off_t viommu_get_req_offset(struct viommu_dev *viommu,
>>  {
>>  	size_t tail_size = sizeof(struct virtio_iommu_req_tail);
>>  
>> +	if (req->type == VIRTIO_IOMMU_T_PROBE)
>> +		return len - viommu->probe_size - tail_size;
>> +
>>  	return len - tail_size;
>>  }
>>  
>> @@ -414,6 +420,101 @@ static int viommu_replay_mappings(struct viommu_domain *vdomain)
>>  	return ret;
>>  }
>>  
>> +static int viommu_add_resv_mem(struct viommu_endpoint *vdev,
>> +			       struct virtio_iommu_probe_resv_mem *mem,
>> +			       size_t len)
>> +{
>> +	struct iommu_resv_region *region = NULL;
>> +	unsigned long prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
>> +
> nit: extra void line
>> +	u64 start = le64_to_cpu(mem->start);
>> +	u64 end = le64_to_cpu(mem->end);
>> +	size_t size = end - start + 1;
>> +
>> +	if (len < sizeof(*mem))
>> +		return -EINVAL;
>> +
>> +	switch (mem->subtype) {
>> +	default:
>> +		dev_warn(vdev->dev, "unknown resv mem subtype 0x%x\n",
>> +			 mem->subtype);
>> +		/* Fall-through */
>> +	case VIRTIO_IOMMU_RESV_MEM_T_RESERVED:
>> +		region = iommu_alloc_resv_region(start, size, 0,
>> +						 IOMMU_RESV_RESERVED);
> need to test region
>> +		break;
>> +	case VIRTIO_IOMMU_RESV_MEM_T_MSI:
>> +		region = iommu_alloc_resv_region(start, size, prot,
>> +						 IOMMU_RESV_MSI);
> same
>> +		break;
>> +	}
>> +
>> +	list_add(&vdev->resv_regions, &region->list);
>> +	return 0;
>> +}
>> +
>> +static int viommu_probe_endpoint(struct viommu_dev *viommu, struct device *dev)
>> +{
>> +	int ret;
>> +	u16 type, len;
>> +	size_t cur = 0;
>> +	size_t probe_len;
>> +	struct virtio_iommu_req_probe *probe;
>> +	struct virtio_iommu_probe_property *prop;
>> +	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
>> +	struct viommu_endpoint *vdev = fwspec->iommu_priv;
>> +
>> +	if (!fwspec->num_ids)
>> +		return -EINVAL;
>> +
>> +	probe_len = sizeof(*probe) + viommu->probe_size +
>> +		    sizeof(struct virtio_iommu_req_tail);
>> +	probe = kzalloc(probe_len, GFP_KERNEL);
>> +	if (!probe)
>> +		return -ENOMEM;
>> +
>> +	probe->head.type = VIRTIO_IOMMU_T_PROBE;
>> +	/*
>> +	 * For now, assume that properties of an endpoint that outputs multiple
>> +	 * IDs are consistent. Only probe the first one.
>> +	 */
>> +	probe->endpoint = cpu_to_le32(fwspec->ids[0]);
>> +
>> +	ret = viommu_send_req_sync(viommu, probe, probe_len);
>> +	if (ret)
>> +		goto out_free;
>> +
>> +	prop = (void *)probe->properties;
>> +	type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
>> +
>> +	while (type != VIRTIO_IOMMU_PROBE_T_NONE &&
>> +	       cur < viommu->probe_size) {
>> +		len = le16_to_cpu(prop->length) + sizeof(*prop);
>> +
>> +		switch (type) {
>> +		case VIRTIO_IOMMU_PROBE_T_RESV_MEM:
>> +			ret = viommu_add_resv_mem(vdev, (void *)prop, len);
>> +			break;
>> +		default:
>> +			dev_err(dev, "unknown viommu prop 0x%x\n", type);
>> +		}
>> +
>> +		if (ret)
>> +			dev_err(dev, "failed to parse viommu prop 0x%x\n", type);
>> +
>> +		cur += len;
>> +		if (cur >= viommu->probe_size)
>> +			break;
>> +
>> +		prop = (void *)probe->properties + cur;
>> +		type = le16_to_cpu(prop->type) & VIRTIO_IOMMU_PROBE_T_MASK;
>> +	}
>> +
>> +out_free:
>> +	kfree(probe);
>> +	return ret;
>> +}
>> +
>>  /* IOMMU API */
>>  
>>  static struct iommu_domain *viommu_domain_alloc(unsigned type)
>> @@ -636,15 +737,33 @@ static void viommu_iotlb_sync(struct iommu_domain *domain)
>>  
>>  static void viommu_get_resv_regions(struct device *dev, struct list_head *head)
>>  {
>> -	struct iommu_resv_region *region;
>> +	struct iommu_resv_region *entry, *new_entry, *msi = NULL;
>> +	struct viommu_endpoint *vdev = dev->iommu_fwspec->iommu_priv;
>>  	int prot = IOMMU_WRITE | IOMMU_NOEXEC | IOMMU_MMIO;
>>  
>> -	region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH, prot,
>> -					 IOMMU_RESV_SW_MSI);
>> -	if (!region)
>> -		return;
>> +	list_for_each_entry(entry, &vdev->resv_regions, list) {
>> +		/*
>> +		 * If the device registered a bypass MSI windows, use it.
> any bypass MSI windows?
>> +		 * Otherwise add a software-mapped region
>> +		 */
>> +		if (entry->type == IOMMU_RESV_MSI)
>> +			msi = entry;
>> +
>> +		new_entry = kmemdup(entry, sizeof(*entry), GFP_KERNEL);
>> +		if (!new_entry)
>> +			return;
>> +		list_add_tail(&new_entry->list, head);
>> +	}
>> +
>> +	if (!msi) {
>> +		msi = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
>> +					      prot, IOMMU_RESV_SW_MSI);
>> +		if (!msi)
>> +			return;
>> +
>> +		list_add_tail(&msi->list, head);
>> +	}
>>  
>> -	list_add_tail(&region->list, head);
>>  	iommu_dma_get_resv_regions(dev, head);
>>  }
>>  
>> @@ -692,9 +811,18 @@ static int viommu_add_device(struct device *dev)
>>  	if (!vdev)
>>  		return -ENOMEM;
>>  
>> +	vdev->dev = dev;
>>  	vdev->viommu = viommu;
>> +	INIT_LIST_HEAD(&vdev->resv_regions);
>>  	fwspec->iommu_priv = vdev;
>>  
>> +	if (viommu->probe_size) {
>> +		/* Get additional information for this endpoint */
>> +		ret = viommu_probe_endpoint(viommu, dev);
>> +		if (ret)
> leaks vdev
>> +			return ret;
>> +	}
>> +
>>  	ret = iommu_device_link(&viommu->iommu, dev);
>>  	if (ret)
>>  		goto err_free_dev;
>> @@ -717,6 +845,7 @@ static int viommu_add_device(struct device *dev)
>>  	iommu_device_unlink(&viommu->iommu, dev);
>>  
>>  err_free_dev:
>> +	viommu_put_resv_regions(dev, &vdev->resv_regions);
>>  	kfree(vdev);
>>  
>>  	return ret;
>> @@ -734,6 +863,7 @@ static void viommu_remove_device(struct device *dev)
>>  
>>  	iommu_group_remove_device(dev);
>>  	iommu_device_unlink(&vdev->viommu->iommu, dev);
>> +	viommu_put_resv_regions(dev, &vdev->resv_regions);
>>  	kfree(vdev);
>>  }
>>  
>> @@ -832,6 +962,10 @@ static int viommu_probe(struct virtio_device *vdev)
>>  			     struct virtio_iommu_config, domain_bits,
>>  			     &viommu->domain_bits);
>>  
>> +	virtio_cread_feature(vdev, VIRTIO_IOMMU_F_PROBE,
>> +			     struct virtio_iommu_config, probe_size,
>> +			     &viommu->probe_size);
>> +
>>  	viommu->geometry = (struct iommu_domain_geometry) {
>>  		.aperture_start	= input_start,
>>  		.aperture_end	= input_end,
>> @@ -913,6 +1047,7 @@ static unsigned int features[] = {
>>  	VIRTIO_IOMMU_F_MAP_UNMAP,
>>  	VIRTIO_IOMMU_F_DOMAIN_BITS,
>>  	VIRTIO_IOMMU_F_INPUT_RANGE,
>> +	VIRTIO_IOMMU_F_PROBE,
>>  };
>>  
>>  static struct virtio_device_id id_table[] = {
>> diff --git a/include/uapi/linux/virtio_iommu.h b/include/uapi/linux/virtio_iommu.h
>> index e808fc7fbe82..feed74586bb0 100644
>> --- a/include/uapi/linux/virtio_iommu.h
>> +++ b/include/uapi/linux/virtio_iommu.h
>> @@ -14,6 +14,7 @@
>>  #define VIRTIO_IOMMU_F_DOMAIN_BITS		1
>>  #define VIRTIO_IOMMU_F_MAP_UNMAP		2
>>  #define VIRTIO_IOMMU_F_BYPASS			3
>> +#define VIRTIO_IOMMU_F_PROBE			4
>>  
>>  struct virtio_iommu_config {
>>  	/* Supported page sizes */
>> @@ -25,6 +26,9 @@ struct virtio_iommu_config {
>>  	} input_range;
>>  	/* Max domain ID size */
>>  	__u8					domain_bits;
>> +	__u8					padding[3];
>> +	/* Probe buffer size */
>> +	__u32					probe_size;
>>  };
>>  
>>  /* Request types */
>> @@ -32,6 +36,7 @@ struct virtio_iommu_config {
>>  #define VIRTIO_IOMMU_T_DETACH			0x02
>>  #define VIRTIO_IOMMU_T_MAP			0x03
>>  #define VIRTIO_IOMMU_T_UNMAP			0x04
>> +#define VIRTIO_IOMMU_T_PROBE			0x05
>>  
>>  /* Status types */
>>  #define VIRTIO_IOMMU_S_OK			0x00
>> @@ -98,4 +103,38 @@ struct virtio_iommu_req_unmap {
>>  	struct virtio_iommu_req_tail		tail;
>>  };
>>  
>> +#define VIRTIO_IOMMU_PROBE_T_NONE		0
>> +#define VIRTIO_IOMMU_PROBE_T_RESV_MEM		1
>> +
>> +#define VIRTIO_IOMMU_PROBE_T_MASK		0xfff
>> +
>> +struct virtio_iommu_probe_property {
>> +	__le16					type;
>> +	__le16					length;
>> +};
>> +
>> +#define VIRTIO_IOMMU_RESV_MEM_T_RESERVED	0
>> +#define VIRTIO_IOMMU_RESV_MEM_T_MSI		1
>> +
>> +struct virtio_iommu_probe_resv_mem {
>> +	struct virtio_iommu_probe_property	head;
>> +	__u8					subtype;
>> +	__u8					reserved[3];
>> +	__le64					start;
>> +	__le64					end;
>> +};
>> +
>> +struct virtio_iommu_req_probe {
>> +	struct virtio_iommu_req_head		head;
>> +	__le32					endpoint;
>> +	__u8					reserved[64];
>> +
>> +	__u8					properties[];
>> +
>> +	/*
>> +	 * Tail follows the variable-length properties array. No padding,
>> +	 * property lengths are all aligned on 8 bytes.
>> +	 */
>> +};
>> +
>>  #endif
>>
> 
> Thanks
> 
> Eric
> _______________________________________________
> iommu mailing list
> iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx
> https://lists.linuxfoundation.org/mailman/listinfo/iommu
> 

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux