[PATCH v3 0/4] kvm: arm/arm64: vgic: APRn uaccess support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



v3: Coding style fix.
    Add the valid APRn access check which Marc proposed. 

v2: Split the patch again to make it easier for review
    some fixes were proposed by Marc

v1: the problem describe:
In the case (GICv2 on GICv3 migration), I did the test on my board as follow:
vm boot => migrate to destination => shutdown at destination => start at destination 
=> migrate back to source ... go round and begin again;

I tested many times, but unlucky, there maybe failed by accident when shutdown the vm 
at destination. (GICv3 on GICv3 migration, 1000+ times, That's OK).
while failed,  we can watch the interrupts in the vm, some vcpus of the vm can not 
receive the virt timer interrupt. And, these vcpus will 100% with top tool at host.

vgic_state debug file at destination shows(a active virt timer interrupt) that:
VCPU 0 TYP   ID TGT_ID PLAEHC     HWID   TARGET SRC PRI VCPU_ID
---------------------------------------------------------------
            ....................
       PPI   25      0 000001        0        1   0 160      -1
       PPI   26      0 000001        0        1   0 160      -1
       PPI   27      0 011111       27        1   0 160       0


I added log to print ICH* registers for VCPU0 at destination:
**HCR:0x1, VMCR:0xf0ec0001,SRE:0x0, ELRSR:0xe**
-----AP0R:0: 0x0------
-----AP0R:1: 0x0------
-----AP0R:2: 0x0------
-----AP0R:3: 0x0------
-----AP1R:0: 0x0------
-----AP1R:1: 0x0------
-----AP1R:2: 0x0------
-----AP1R:3: 0x0------
-----LR:0: 0xa0a0001b0000001b------
-----LR:1: 0x0------
-----LR:2: 0x0------
-----LR:3: 0x0------

and the ICH_AP1R0 value is 0x10000 at source.

At present, QEMU have supproted GICC_APRn put/set interface for emulated GICv2,
and kvm does not support the uaccess interface. This patchset try to support this.


wanghaibin (4):
  kvm: arm/arm64: vgic: Implement the vGICv2 GICC_APRn uaccess
    interface.
  kvm: arm/arm64: vgic-v2: Add GICH_APRn accessors for GICv2
  kvm: arm/arm64: vgic-v3: add ICH_AP[01]Rn accessors for GICv3
  kvm: arm/arm64: vgic: clean up vGICv3 ICC_APRn sysreg uaccess

 arch/arm64/kvm/vgic-sys-reg-v3.c | 25 +++++----------------
 virt/kvm/arm/vgic/vgic-mmio-v2.c | 22 ++++++++++++++++--
 virt/kvm/arm/vgic/vgic-mmio.c    | 28 +++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic-v2.c      | 18 +++++++++++++++
 virt/kvm/arm/vgic/vgic-v3.c      | 48 ++++++++++++++++++++++++++++++++++++++++
 virt/kvm/arm/vgic/vgic.h         |  7 ++++++
 6 files changed, 126 insertions(+), 22 deletions(-)

-- 
1.8.3.1


_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux