On Fri, Jul 14, 2017 at 09:04:10AM +0100, Marc Zyngier wrote: > On 13/07/17 20:20, Christoffer Dall wrote: > > When running the vtimer test on an APM X-Gene, setting the timer value > > to (2^64 - 1) apparently results in the timer always firing, even > > thought the counter is mich lower than the cval. > > Note that the system counter is only guaranteed to be at least 56 bit > wide (see DDI0487B.a G5.1.2), and I seem to remember that X-Gene only > has the minimum. This could explain why setting the comparator to a > value greater than (2^56 - 1) leads to a firing timer (the comparator > appears to be in the past). Thanks for pointing that out, that makes good sense. So then we should definitely fix the test. We could either set it to 2^56 - 1 instead, or just keep the 10s as used in this patch, because the whole test times out after 2s anyway. Thanks, -Christoffer _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
