Re: [PATCH 5/8] arm64: KVM: Disable virtual timer even if the guest is not using it

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 17/09/2015 16:46, Marc Zyngier wrote:
> When running a guest with the architected timer disabled (with QEMU and
> the kernel_irqchip=off option, for example), it is important to make
> sure the timer gets turned off. Otherwise, the guest may try to
> enable it anyway, leading to a screaming HW interrupt.
> 
> The fix is to unconditionally turn off the virtual timer on guest
> exit.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Reviewed-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
>  arch/arm64/kvm/hyp.S | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
> index 39aa322..60a83e2 100644
> --- a/arch/arm64/kvm/hyp.S
> +++ b/arch/arm64/kvm/hyp.S
> @@ -562,8 +562,6 @@
>  	mrs	x3, cntv_ctl_el0
>  	and	x3, x3, #3
>  	str	w3, [x0, #VCPU_TIMER_CNTV_CTL]
> -	bic	x3, x3, #1		// Clear Enable
> -	msr	cntv_ctl_el0, x3
>  
>  	isb
>  
> @@ -571,6 +569,9 @@
>  	str	x3, [x0, #VCPU_TIMER_CNTV_CVAL]
>  
>  1:
> +	// Disable the virtual timer
> +	msr	cntv_ctl_el0, xzr
> +
>  	// Allow physical timer/counter access for the host
>  	mrs	x2, cnthctl_el2
>  	orr	x2, x2, #3
> 

It looks like here in restore_timer_state:

        ldr     w2, [x0, #VCPU_TIMER_CNTV_CTL]
        and     x2, x2, #3
        msr     cntv_ctl_el0, x2

the "and" would be unnecessary if kvm_arm_timer_set_reg remembered to 
do it.  Something like this, which would also make the code more 
consistent between arm and arm64...

diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S
index 702740d37465..93e322b4d242 100644
--- a/arch/arm/kvm/interrupts_head.S
+++ b/arch/arm/kvm/interrupts_head.S
@@ -514,6 +514,7 @@ ARM_BE8(rev	r6, r6  )
 	beq	1f
 
 	mrc	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
+	and	r2, r2, #3
 	str	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
 	bic	r2, #1			@ Clear ENABLE
 	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
@@ -566,7 +567,6 @@ ARM_BE8(rev	r6, r6  )
 	isb
 
 	ldr	r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
-	and	r2, r2, #3
 	mcr	p15, 0, r2, c14, c3, 1	@ CNTV_CTL
 1:
 .endm
diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 10915aaf0b01..bfcd3f3a947b 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -887,7 +887,6 @@ alternative_endif
 	isb
 
 	ldr	w2, [x0, #VCPU_TIMER_CNTV_CTL]
-	and	x2, x2, #3
 	msr	cntv_ctl_el0, x2
 1:
 .endm
diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c
index 98c95f2fcba4..9b03c9f5abbf 100644
--- a/virt/kvm/arm/arch_timer.c
+++ b/virt/kvm/arm/arch_timer.c
@@ -218,7 +218,7 @@ int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value)
 
 	switch (regid) {
 	case KVM_REG_ARM_TIMER_CTL:
-		timer->cntv_ctl = value;
+		timer->cntv_ctl = value & (ARCH_TIMER_CTRL_IT_MASK | ARCH_TIMER_CTRL_ENABLE);
 		break;
 	case KVM_REG_ARM_TIMER_CNT:
 		vcpu->kvm->arch.timer.cntvoff = kvm_phys_timer_read() - value;
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm



[Index of Archives]     [Linux KVM]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux