Minimal VFIO platform implementation supporting register space
user mapping but not IRQ assignment.
Signed-off-by: Kim Phillips <kim.phillips@xxxxxxxxxx>
Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
---
v12 -> v13:
- check device name does not contain any /
- handle case where readlink fully fills the buffer
- in vfio_map_region declare size as uint64_t
v11 -> v12:
- add x-mmap property definition, without which the default value of
vbasedev.allow_mmap is false, hence preventing the reg space from
being mapped.
v10 -> v11:
x Take into account Alex Bennee's comments:
- use g_malloc0_n instead of g_malloc0
- use block declarations when possible
- rework readlink returned value treatment
- use g_strlcat in place of strncat
x use g_snprintf in place of snprintf
x correct error handling in vfio_populate_device,
in case of flag not corresponding to platform device
x various cosmetic changes
v9 -> v10:
- vfio_populate_device no more called in common vfio_get_device
but in vfio_base_device_init
v8 -> v9:
- irq management is moved into a separate patch to ease the review
- VFIO_DEVICE_FLAGS_PLATFORM is checked in vfio_populate_device
- g_free of regions added in vfio_populate_device error label
- virtualID becomes 32b
v7 -> v8:
- change proto of vfio_platform_compute_needs_reset and sets
vbasedev->needs_reset to false there
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- vfio_register_irq_starter renamed into vfio_kick_irqs
we now use a reset notifier instead of a machine init done notifier.
Enables to get rid of the VfioIrqStarterNotifierParams dangling
pointer. Previously we use pbus first_irq. This is no more possible
since the reset notifier takes a void * and first_irq is a field of
a const struct. So now we pass the DeviceState handle of the
interrupt controller. I tried to keep the code generic, reason why
I did not rely on an architecture specific accessor to retrieve
the gsi number (gic accessor as proposed by Alex). I would like to
avoid creating an ARM VFIO device model. I hope this model
model can work on other archs than arm (no multiple intc?);
wouldn't it be simpler to keep the previous first_irq parameter and
relax the const constraint.
v6 -> v7:
- compat is not exposed anymore as a user option. Rationale is
the vfio device became abstract and a specialization is needed
anyway. The derived device must set the compat string.
- in v6 vfio_start_irq_injection was exposed in vfio-platform.h.
A new function dubbed vfio_register_irq_starter replaces it. It
registers a machine init done notifier that programs & starts
all dynamic VFIO device IRQs. This function is supposed to be
called by the machine file. A set of static helper routines are
added too. It must be called before the creation of the platform
bus device.
v5 -> v6:
- vfio_device property renamed into host property
- correct error handling of VFIO_DEVICE_GET_IRQ_INFO ioctl
and remove PCI related comment
- remove declaration of vfio_setup_irqfd and irqfd_allowed
property.Both belong to next patch (irqfd)
- remove declaration of vfio_intp_interrupt in vfio-platform.h
- functions that can be static get this characteristic
- remove declarations of vfio_region_ops, vfio_memory_listener,
group_list, vfio_address_spaces. All are moved to vfio-common.h
- remove vfio_put_device declaration and definition
- print_regions removed. code moved into vfio_populate_regions
- replace DPRINTF by trace events
- new helper routine to set the trigger eventfd
- dissociate intp init from the injection enablement:
vfio_enable_intp renamed into vfio_init_intp and new function
named vfio_start_eventfd_injection
- injection start moved to vfio_start_irq_injection (not anymore
in vfio_populate_interrupt)
- new start_irq_fn field in VFIOPlatformDevice corresponding to
the function that will be used for starting injection
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation,
x correct misleading comment in vfio_intp_interrupt.
x Fix bugs thanks to fake interrupt modality
- VFIOPlatformDeviceClass becomes abstract
- add error_setg in vfio_platform_realize
v4 -> v5:
- vfio-plaform.h included first
- cleanup error handling in *populate*, vfio_get_device,
vfio_enable_intp
- vfio_put_device not called anymore
- add some includes to follow vfio policy
v3 -> v4:
[Eric Auger]
- merge of "vfio: Add initial IRQ support in platform device"
to get a full functional patch although perfs are limited.
- removal of unrealize function since I currently understand
it is only used with device hot-plug feature.
v2 -> v3:
[Eric Auger]
- further factorization between PCI and platform (VFIORegion,
VFIODevice). same level of functionality.
<= v2:
[Kim Philipps]
- Initial Creation of the device supporting register space mapping
---
hw/vfio/Makefile.objs | 1 +
hw/vfio/platform.c | 288 ++++++++++++++++++++++++++++++++++++++++
include/hw/vfio/vfio-common.h | 1 +
include/hw/vfio/vfio-platform.h | 44 ++++++
trace-events | 5 +
5 files changed, 339 insertions(+)
create mode 100644 hw/vfio/platform.c
create mode 100644 include/hw/vfio/vfio-platform.h
diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
index e31f30e..c5c76fe 100644
--- a/hw/vfio/Makefile.objs
+++ b/hw/vfio/Makefile.objs
@@ -1,4 +1,5 @@
ifeq ($(CONFIG_LINUX), y)
obj-$(CONFIG_SOFTMMU) += common.o
obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_SOFTMMU) += platform.o
endif
diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
new file mode 100644
index 0000000..48dfc55
--- /dev/null
+++ b/hw/vfio/platform.c
@@ -0,0 +1,288 @@
+/*
+ * vfio based device assignment support - platform devices
+ *
+ * Copyright Linaro Limited, 2014
+ *
+ * Authors:
+ * Kim Phillips <kim.phillips@xxxxxxxxxx>
+ * Eric Auger <eric.auger@xxxxxxxxxx>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Based on vfio based PCI device assignment support:
+ * Copyright Red Hat, Inc. 2012
+ */
+
+#include <linux/vfio.h>
+#include <sys/ioctl.h>
+
+#include "hw/vfio/vfio-platform.h"
+#include "qemu/error-report.h"
+#include "qemu/range.h"
+#include "sysemu/sysemu.h"
+#include "exec/memory.h"
+#include "hw/sysbus.h"
+#include "trace.h"
+#include "hw/platform-bus.h"
+
+/* VFIO skeleton */
+
+/* not implemented yet */
+static void vfio_platform_compute_needs_reset(VFIODevice *vbasedev)
+{
+ vbasedev->needs_reset = false;
+}
+
+/* not implemented yet */
+static int vfio_platform_hot_reset_multi(VFIODevice *vbasedev)
+{
+ return 0;
+}
+
+/**
+ * vfio_populate_device - Allocate and populate MMIO region
+ * structs according to driver returned information
+ * @vbasedev: the VFIO device handle
+ *
+ */
+static int vfio_populate_device(VFIODevice *vbasedev)
+{
+ int i, ret = -1;
+ VFIOPlatformDevice *vdev =
+ container_of(vbasedev, VFIOPlatformDevice, vbasedev);
+
+ if (!(vbasedev->flags & VFIO_DEVICE_FLAGS_PLATFORM)) {
+ error_report("vfio: Um, this isn't a platform device");
+ return ret;
+ }
+
+ vdev->regions = g_malloc0_n(1,
+ sizeof(VFIORegion *) * vbasedev->num_regions);
+
+ for (i = 0; i < vbasedev->num_regions; i++) {
+ struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) };
+ VFIORegion *ptr;
+
+ vdev->regions[i] = g_malloc0_n(1, sizeof(VFIORegion));
+ ptr = vdev->regions[i];
+ reg_info.index = i;
+ ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info);
+ if (ret) {
+ error_report("vfio: Error getting region %d info: %m", i);
+ goto reg_error;
+ }
+ ptr->flags = reg_info.flags;
+ ptr->size = reg_info.size;
+ ptr->fd_offset = reg_info.offset;
+ ptr->nr = i;
+ ptr->vbasedev = vbasedev;
+
+ trace_vfio_platform_populate_regions(ptr->nr,
+ (unsigned long)ptr->flags,
+ (unsigned long)ptr->size,
+ ptr->vbasedev->fd,
+ (unsigned long)ptr->fd_offset);
+ }
+
+ return 0;
+reg_error:
+ for (i = 0; i < vbasedev->num_regions; i++) {
+ g_free(vdev->regions[i]);
+ }
+ g_free(vdev->regions);
+ return ret;
+}
+
+/* specialized functions for VFIO Platform devices */
+static VFIODeviceOps vfio_platform_ops = {
+ .vfio_compute_needs_reset = vfio_platform_compute_needs_reset,
+ .vfio_hot_reset_multi = vfio_platform_hot_reset_multi,
+};
+
+/**
+ * vfio_base_device_init - perform preliminary VFIO setup
+ * @vbasedev: the VFIO device handle
+ *
+ * Implement the VFIO command sequence that allows to discover
+ * assigned device resources: group extraction, device
+ * fd retrieval, resource query.
+ * Precondition: the device name must be initialized
+ */
+static int vfio_base_device_init(VFIODevice *vbasedev)
+{
+ VFIOGroup *group;
+ VFIODevice *vbasedev_iter;
+ char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
+ ssize_t len;
+ struct stat st;
+ int groupid;
+ int ret;
+
+ /* name must be set prior to the call */
+ if (!vbasedev->name || strchr(vbasedev->name, '/')) {
+ return -EINVAL;
+ }
+
+ /* Check that the host device exists */
+ g_snprintf(path, sizeof(path), "/sys/bus/platform/devices/%s/",
+ vbasedev->name);
+
+ if (stat(path, &st) < 0) {
+ error_report("vfio: error: no such host device: %s", path);
+ return -errno;
+ }
+
+ g_strlcat(path, "iommu_group", sizeof(path));
+ len = readlink(path, iommu_group_path, sizeof(iommu_group_path));
+ if (len < 0 || len >= sizeof(iommu_group_path)) {
+ error_report("vfio: error no iommu_group for device");
+ return len < 0 ? -errno : ENAMETOOLONG;
+ }
+
+ iommu_group_path[len] = 0;
+ group_name = basename(iommu_group_path);
+
+ if (sscanf(group_name, "%d", &groupid) != 1) {
+ error_report("vfio: error reading %s: %m", path);
+ return -errno;
+ }
+
+ trace_vfio_platform_base_device_init(vbasedev->name, groupid);
+
+ group = vfio_get_group(groupid, &address_space_memory);
+ if (!group) {
+ error_report("vfio: failed to get group %d", groupid);
+ return -ENOENT;
+ }
+
+ g_snprintf(path, sizeof(path), "%s", vbasedev->name);
+
+ QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
+ if (strcmp(vbasedev_iter->name, vbasedev->name) == 0) {
+ error_report("vfio: error: device %s is already attached", path);
+ vfio_put_group(group);
+ return -EBUSY;
+ }
+ }
+ ret = vfio_get_device(group, path, vbasedev);
+ if (ret) {
+ error_report("vfio: failed to get device %s", path);
+ vfio_put_group(group);
+ return ret;
+ }
+
+ ret = vfio_populate_device(vbasedev);
+ if (ret) {
+ error_report("vfio: failed to populate device %s", path);
+ vfio_put_group(group);
+ }
+
+ return ret;
+}
+
+/**
+ * vfio_map_region - initialize the 2 memory regions for a given
+ * MMIO region index
+ * @vdev: the VFIO platform device handle
+ * @nr: the index of the region
+ *
+ * Init the top memory region and the mmapped memory region beneath
+ * VFIOPlatformDevice is used since VFIODevice is not a QOM Object
+ * and could not be passed to memory region functions
+*/
+static void vfio_map_region(VFIOPlatformDevice *vdev, int nr)
+{
+ VFIORegion *region = vdev->regions[nr];
+ uint64_t size = region->size;
+ char name[64];
+
+ if (!size) {
+ return;
+ }
+
+ g_snprintf(name, sizeof(name), "VFIO %s region %d",
+ vdev->vbasedev.name, nr);
+
+ /* A "slow" read/write mapping underlies all regions */
+ memory_region_init_io(®ion->mem, OBJECT(vdev), &vfio_region_ops,
+ region, name, size);
+
+ g_strlcat(name, " mmap", sizeof(name));
+
+ if (vfio_mmap_region(OBJECT(vdev), region, ®ion->mem,
+ ®ion->mmap_mem, ®ion->mmap, size, 0, name)) {
+ error_report("%s unsupported. Performance may be slow", name);
+ }
+}
+
+/**
+ * vfio_platform_realize - the device realize function
+ * @dev: device state pointer
+ * @errp: error
+ *
+ * initialize the device, its memory regions and IRQ structures
+ * IRQ are started separately
+ */
+static void vfio_platform_realize(DeviceState *dev, Error **errp)
+{
+ VFIOPlatformDevice *vdev = VFIO_PLATFORM_DEVICE(dev);
+ SysBusDevice *sbdev = SYS_BUS_DEVICE(dev);
+ VFIODevice *vbasedev = &vdev->vbasedev;
+ int i, ret;
+
+ vbasedev->type = VFIO_DEVICE_TYPE_PLATFORM;
+ vbasedev->ops = &vfio_platform_ops;
+
+ trace_vfio_platform_realize(vbasedev->name, vdev->compat);
+
+ ret = vfio_base_device_init(vbasedev);
+ if (ret) {
+ error_setg(errp, "vfio: vfio_base_device_init failed for %s",
+ vbasedev->name);
+ return;
+ }
+
+ for (i = 0; i < vbasedev->num_regions; i++) {
+ vfio_map_region(vdev, i);
+ sysbus_init_mmio(sbdev, &vdev->regions[i]->mem);
+ }
+}
+
+static const VMStateDescription vfio_platform_vmstate = {
+ .name = TYPE_VFIO_PLATFORM,
+ .unmigratable = 1,
+};
+
+static Property vfio_platform_dev_properties[] = {
+ DEFINE_PROP_STRING("host", VFIOPlatformDevice, vbasedev.name),
+ DEFINE_PROP_BOOL("x-mmap", VFIOPlatformDevice, vbasedev.allow_mmap, true),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void vfio_platform_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = vfio_platform_realize;
+ dc->props = vfio_platform_dev_properties;
+ dc->vmsd = &vfio_platform_vmstate;
+ dc->desc = "VFIO-based platform device assignment";
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+}
+
+static const TypeInfo vfio_platform_dev_info = {
+ .name = TYPE_VFIO_PLATFORM,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(VFIOPlatformDevice),
+ .class_init = vfio_platform_class_init,
+ .class_size = sizeof(VFIOPlatformDeviceClass),
+ .abstract = true,
+};
+
+static void register_vfio_platform_dev_type(void)
+{
+ type_register_static(&vfio_platform_dev_info);
+}
+
+type_init(register_vfio_platform_dev_type)
diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index 0d1fb80..59a321d 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -42,6 +42,7 @@
enum {
VFIO_DEVICE_TYPE_PCI = 0,
+ VFIO_DEVICE_TYPE_PLATFORM = 1,
};
typedef struct VFIORegion {
diff --git a/include/hw/vfio/vfio-platform.h b/include/hw/vfio/vfio-platform.h
new file mode 100644
index 0000000..338f0c6
--- /dev/null
+++ b/include/hw/vfio/vfio-platform.h
@@ -0,0 +1,44 @@
+/*
+ * vfio based device assignment support - platform devices
+ *
+ * Copyright Linaro Limited, 2014
+ *
+ * Authors:
+ * Kim Phillips <kim.phillips@xxxxxxxxxx>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ *
+ * Based on vfio based PCI device assignment support:
+ * Copyright Red Hat, Inc. 2012
+ */
+
+#ifndef HW_VFIO_VFIO_PLATFORM_H
+#define HW_VFIO_VFIO_PLATFORM_H
+
+#include "hw/sysbus.h"
+#include "hw/vfio/vfio-common.h"
+
+#define TYPE_VFIO_PLATFORM "vfio-platform"
+
+typedef struct VFIOPlatformDevice {
+ SysBusDevice sbdev;
+ VFIODevice vbasedev; /* not a QOM object */
+ VFIORegion **regions;
+ char *compat; /* compatibility string */
+} VFIOPlatformDevice;
+
+typedef struct VFIOPlatformDeviceClass {
+ /*< private >*/
+ SysBusDeviceClass parent_class;
+ /*< public >*/
+} VFIOPlatformDeviceClass;
+
+#define VFIO_PLATFORM_DEVICE(obj) \
+ OBJECT_CHECK(VFIOPlatformDevice, (obj), TYPE_VFIO_PLATFORM)
+#define VFIO_PLATFORM_DEVICE_CLASS(klass) \
+ OBJECT_CLASS_CHECK(VFIOPlatformDeviceClass, (klass), TYPE_VFIO_PLATFORM)
+#define VFIO_PLATFORM_DEVICE_GET_CLASS(obj) \
+ OBJECT_GET_CLASS(VFIOPlatformDeviceClass, (obj), TYPE_VFIO_PLATFORM)
+
+#endif /*HW_VFIO_VFIO_PLATFORM_H*/
diff --git a/trace-events b/trace-events
index 30eba92..2ccc822 100644
--- a/trace-events
+++ b/trace-events
@@ -1560,6 +1560,11 @@ vfio_put_group(int fd) "close group->fd=%d"
vfio_get_device(const char * name, unsigned int flags, unsigned int num_regions, unsigned int num_irqs) "Device %s flags: %u, regions: %u, irqs: %u"
vfio_put_base_device(int fd) "close vdev->fd=%d"
+# hw/vfio/platform.c
+vfio_platform_populate_regions(int region_index, unsigned long flag, unsigned long size, int fd, unsigned long offset) "- region %d flags = 0x%lx, size = 0x%lx, fd= %d, offset = 0x%lx"
+vfio_platform_base_device_init(char *name, int groupid) "%s belongs to group #%d"
+vfio_platform_realize(char *name, char *compat) "vfio device %s, compat = %s"
+
#hw/acpi/memory_hotplug.c
mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
mhp_acpi_read_addr_lo(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr lo: 0x%"PRIx32
--
1.8.3.2
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
