This series aims at enabling KVM platform device passthrough.
It implements a VFIO platform device, derived from VFIO PCI device.
The VFIO platform device uses the host VFIO platform driver which must
be bound to the assigned device prior to the QEMU system start.
- the guest can directly access the device register space
- assigned device IRQs are transparently routed to the guest by
QEMU/KVM (2 methods are supported in this series: user-level eventfd
handling and irqfd). Forward method is proposed in a separate series.
- iommu is transparently programmed to prevent the device from
accessing physical pages outside of the guest address space
This patch series is made of the following patch file groups:
group1: 1-6) VFIO abstract device & calxeda midway platform device
without irqfd support
group2: 7) VFIO platform device with irqfd support
The 2 groups should be separately upstreamable in that order.
- the 2 groups depend on [1], [2], [3], [4]
- group2 depends on [5].
Dependency List:
QEMU dependencies:
[1] [PATCH v10 0/4] machvirt dynamic sysbus device instantiation
Linaro, http://lists.gnu.org/archive/html/qemu-devel/2015-01/msg01733.html
[2] [RFC v2 0/2] explicit VGIC initialization in finalize function
Linaro, http://lists.gnu.org/archive/html/qemu-devel/2015-01/msg01762.html
Kernel Dependencies:
[3] [PATCH v13 00/18] VFIO support for platform devices
VOSYS, http://www.spinics.net/lists/kvm-arm/msg13414.html
[4] [PATCH v3 0/6] vfio: type1: support for ARM SMMUS with VFIO_IOMMU_TYPE1
VOSYS, http://www.spinics.net/lists/kvm-arm/msg11738.html
[5] [PATCH v8] irqfd support for arm/arm64
Eric Auger, https://lkml.org/lkml/2015/1/19/410
- kernel pieces can be found at:
http://git.linaro.org/people/eric.auger/linux.git
(branch irqfd_integ_v9)
- QEMU pieces can be found at:
http://git.linaro.org/people/eric.auger/qemu.git
(branch vfio_integ_v10)
The patch series was tested on Calxeda Midway (ARMv7) where one xgmac
is assigned to KVM host while the second one is assigned to the guest.
multiple IRQ use case was emulated using manual eventfd trigger.
Wiki for Calxeda Midway setup:
https://wiki.linaro.org/LEG/Engineering/Virtualization/Platform_Device_Passthrough_on_Midway
History:
v9->v10:
- rebase on "vfio: cleanup vfio_get_device error path, remove
vfio_populate_device": vfio_populate_device no more called in
vfio_get_device but in vfio_base_device_init
- update VFIO header according to vfio platform driver v13 (no AMBA)
v8->v9:
- rebase on 2.2.0 and machvirt dynamic sysbus instantiation v10
- v8 1-11 were pulled
- patch files related to forwarding are moved in a seperate series since
it depends on kernel series still in RFC.
- introduction of basic VFIO platform device split into 3 patch files to
ease the review (hope it will help).
- add an author in platform.c
- add deallocation in vfio_populate_device error case
- add patch file doing the VFIO header sync
- use VFIO_DEVICE_FLAGS_PLATFORM in vfio_populate_device
- rename calxeda_xgmac.c into calxeda-xgmac.c
- sysbus-fdt: add_calxeda_midway_xgmac_fdt_node g_free in case of errors
- reword of linux-headers patch files
v7->v8:
- rebase on v2.2.0-rc3 and integrate
"Add skip_dump flag to ignore memory region during dump"
- KVM header evolution with subindex addition in kvm_arch_forwarded_irq
- split [PATCH v7 03/16] hw/vfio/pci: introduce VFIODevice into 4 patches
- vfio_compute_needs_reset does not return bool anymore
- add some comments about exposed MMIO region and IRQ in calxeda xgmac
device
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- rework IRQ startup: former machine init done notifier is replaced by a
reset notifier. machine file passes the interrupt controller
DeviceState handle (not the platform bus first irq parameter).
- sysbus-fdt:
- move the add_fdt_node_functions array declaration between the device
specific code and the generic code to avoid forward declarations of
decice specific functions
- rename add_basic_vfio_fdt_node into add_calxeda_midway_xgmac_fdt_node
emphasizing the fact it is xgmac specific
v6->v7:
- fake injection test modality removed
- VFIO_DEVICE_TYPE_PLATFORM only introduced with VFIO platform
- new helper functions to start VFIO IRQ on machine init done notifier
(introduced in hw/vfio/platform: add vfio-platform support and notifier
registration invoked in hw/arm/virt: add support for VFIO devices).
vfio_start_irq_injection is replaced by vfio_register_irq_starter.
v5->v6:
- rebase on 2.1rc5 PCI code
- forwarded IRQ first integraton
- vfio_device property renamed into host property
- split IRQ setup in different functions that match the 3 supported
injection techniques (user handled eventfd, irqfd, forwarded IRQ):
removes dynamic switch between injection methods
- introduce fake interrupts as a test modality:
x makes possible to test multiple IRQ user-side handling.
x this is a test feature only: enable to trigger a fd as if the
real physical IRQ hit. No virtual IRQ is injected into the guest
but handling is simulated so that the state machine can be tested
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation,
x correct misleading comment in vfio_intp_interrupt.
x Fix bugs using fake interrupt modality
- irqfd no more advertised in this patchset (handled in [3])
- VFIOPlatformDeviceClass becomes abstract and Calxeda xgmac device
and class is re-introduced (as per v4)
- all DPRINTF removed in platform and replaced by trace-points
- corrects compilation with configure --disable-kvm
- simplifies the split for vfio_get_device and introduce a unique
specialized function named vfio_populate_device
- group_list renamed into vfio_group_list
- hw/arm/dyn_sysbus_devtree.c currently only support vfio-calxeda-xgmac
instantiation. Needs to be specialized for other VFIO devices
- fix 2 bugs in dyn_sysbus_devtree(reg_attr index and compat)
v4->v5:
- rebase on v2.1.0 PCI code
- take into account Alex Williamson comments on PCI code rework
- trace updates in vfio_region_write/read
- remove fd from VFIORegion
- get/put ckeanup
- bug fix: bar region's vbasedev field duly initialization
- misc cleanups in platform device
- device tree node generation removed from device and handled in
hw/arm/dyn_sysbus_devtree.c
- remove "hw/vfio: add an example calxeda_xgmac": with removal of
device tree node generation we do not have so many things to
implement in that derived device yet. May be re-introduced later
on if needed typically for reset/migration.
- no GSI routing table anymore
v3->v4 changes (Eric Auger, Alvise Rigo)
- rebase on last VFIO PCI code (v2.1.0-rc0)
- full git history rework to ease PCI code change review
- mv include files in hw/vfio
- DPRINTF reformatting temporarily moved out
- support of VFIO virq (removal of resamplefd handler on user-side)
- integration with sysbus dynamic instantiation framwork
- removal of unrealize and cleanup routines until it is better
understood what is really needed
- Support of VFIO for Amba devices should be handled in an inherited
device to specialize the device tree generation (clock handle currently
missing in framework however)
- "Always use eventfd as notifying mechanism" temporarily moved out
- static instantiation is not mainstream (although it remains possible)
note if static instantiation is used, irqfd must be setup in machine file
when virtual IRQ is known
- create the GSI routing table on qemu side
v2->v3 changes (Alvise Rigo, Eric Auger):
- Following Alex W recommandations, further efforts to factorize the
code between PCI:introduction of VFIODevice and VFIORegion
as base classes
- unique reset handler for platform and PCI
- cleanup following Kim's comments
- multiple IRQ support mechanics should be in place although not
tested
- Better handling of MMIO multiple regions
- New features and fixes by Alvise (multiple compat string, exec
flag, force eventfd usage, amba device tree support)
- irqfd support
v1->v2 changes (Kim Phillips, Eric Auger):
- IRQ initial support (legacy mode where eventfds are handled on
user side)
- hacked dynamic instantiation
v1 (Kim Phillips):
- initial split between PCI and platform
- MMIO support only
- static instantiation
Best Regards
Eric
Eric Auger (7):
linux-headers: update VFIO header for VFIO platform drivers
hw/vfio/platform: vfio-platform skeleton
hw/vfio/platform: add irq assignment
hw/vfio/platform: add capability to start IRQ propagation
hw/vfio: calxeda xgmac device
hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
hw/vfio/platform: add irqfd support
hw/arm/sysbus-fdt.c | 83 ++++
hw/arm/virt.c | 15 +-
hw/vfio/Makefile.objs | 2 +
hw/vfio/calxeda-xgmac.c | 54 +++
hw/vfio/platform.c | 747 +++++++++++++++++++++++++++++++++++
include/hw/vfio/vfio-calxeda-xgmac.h | 46 +++
include/hw/vfio/vfio-common.h | 1 +
include/hw/vfio/vfio-platform.h | 86 ++++
linux-headers/linux/vfio.h | 31 +-
trace-events | 14 +
10 files changed, 1062 insertions(+), 17 deletions(-)
create mode 100644 hw/vfio/calxeda-xgmac.c
create mode 100644 hw/vfio/platform.c
create mode 100644 include/hw/vfio/vfio-calxeda-xgmac.h
create mode 100644 include/hw/vfio/vfio-platform.h
--
1.8.3.2
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
