Allow the switch to a second stage secure monitor just before switching to non-secure. This allows a resident piece of firmware to be active once the kernel has been entered (the u-boot monitor is dead anyway, its pages being reused). Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx> --- arch/arm/cpu/armv7/nonsec_virt.S | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index c5a8347..f07e3f7 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -35,6 +35,12 @@ _monitor_vectors: * We use only r0 and r1 here, due to constraints in the caller. */ _secure_monitor: +#ifdef CONFIG_ARMV7_PSCI_BASE + ldr r1, =CONFIG_ARMV7_PSCI_BASE @ Switch to the next monitor + mcr p15, 0, r1, c12, c0, 1 + isb +#endif + mrc p15, 0, r1, c1, c1, 0 @ read SCR bic r1, r1, #0x4e @ clear IRQ, FIQ, EA, nET bits orr r1, r1, #0x31 @ enable NS, AW, FW bits @@ -50,7 +56,7 @@ _secure_monitor: isb #ifdef CONFIG_ARMV7_VIRT - mrceq p15, 0, r0, c12, c0, 1 @ get MVBAR value + adreq r0, _monitor_vectors mcreq p15, 4, r0, c12, c0, 0 @ write HVBAR #endif bne 1f -- 1.8.2.3 _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm
