Hi Andre,
On Fri, 9 Aug 2013 17:03:12 +0200, Andre Przywara
<andre.przywara@xxxxxxxxxx> wrote:
> To enable hypervisors utilizing the ARMv7 virtualization extension
> on the Versatile Express board with the A15 core tile, we add the
> required configuration variable.
> Also we define the board specific functions to do the SMP bringup:
> smp_set_cpu_boot_addr() to set the start address for secondary cores
> and smp_waitloop() to wait for IPIs and jump to the start address.
>
> This also serves as an example for what to do when adding support for
> new boards.
>
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxxxxx>
> ---
> board/armltd/vexpress/Makefile | 7 +++++--
> board/armltd/vexpress/vexpress_common.c | 13 ++++++++++++
> board/armltd/vexpress/vexpress_smp.S | 36 +++++++++++++++++++++++++++++++++
> include/configs/vexpress_ca15_tc2.h | 4 ++++
> 4 files changed, 58 insertions(+), 2 deletions(-)
> create mode 100644 board/armltd/vexpress/vexpress_smp.S
>
> diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
> index 6719f3d..282ef6d 100644
> --- a/board/armltd/vexpress/Makefile
> +++ b/board/armltd/vexpress/Makefile
> @@ -26,9 +26,12 @@ include $(TOPDIR)/config.mk
> LIB = $(obj)lib$(BOARD).o
>
> COBJS := vexpress_common.o
> +ifneq ($(CONFIG_ARMV7_NONSEC)$(CONFIG_ARMV7_VIRT),)
> +SOBJS := vexpress_smp.o
> +endif
>
> -SRCS := $(COBJS:.o=.c)
> -OBJS := $(addprefix $(obj),$(COBJS))
> +SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S)
> +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
>
> $(LIB): $(obj).depend $(OBJS)
> $(call cmd_link_o_target, $(OBJS))
> diff --git a/board/armltd/vexpress/vexpress_common.c b/board/armltd/vexpress/vexpress_common.c
> index 2c54869..66b810d 100644
> --- a/board/armltd/vexpress/vexpress_common.c
> +++ b/board/armltd/vexpress/vexpress_common.c
> @@ -272,3 +272,16 @@ ulong get_tbclk(void)
> {
> return (ulong)CONFIG_SYS_HZ;
> }
> +
> +/* Setting the address at which secondary cores start from.
> + * Versatile Express uses one address for all cores, so ignore corenr
> + */
> +void smp_set_core_boot_addr(unsigned long addr, int corenr)
> +{
> + /* The SYSFLAGS register on VExpress needs to be cleared first
> + * by writing to the next address, since any writes to the address
> + * at offset 0 will only be ORed in
> + */
> + writel(~0, CONFIG_SYSFLAGS_ADDR + 4);
> + writel(addr, CONFIG_SYSFLAGS_ADDR);
> +}
> diff --git a/board/armltd/vexpress/vexpress_smp.S b/board/armltd/vexpress/vexpress_smp.S
> new file mode 100644
> index 0000000..41be2e7
> --- /dev/null
> +++ b/board/armltd/vexpress/vexpress_smp.S
> @@ -0,0 +1,36 @@
> +/*
> + * code for redirecting secondary cores to their start address
> + *
> + * Copyright (c) 2013 Andre Przywara <andre.przywara@xxxxxxxxxx>
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <config.h>
> +#include <linux/linkage.h>
> +
> +/* void _smp_waitloop(unsigned previous_address); */
> +ENTRY(smp_waitloop)
> + wfi
> + ldr r1, =CONFIG_SYSFLAGS_ADDR @ load start address
> + ldr r1, [r1]
> + cmp r0, r1 @ make sure we dont execute this code
> + beq smp_waitloop @ again (due to a spurious wakeup)
> + mov pc, r1
> +ENDPROC(smp_waitloop)
> diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h
> index 4f425ac..14aa78e 100644
> --- a/include/configs/vexpress_ca15_tc2.h
> +++ b/include/configs/vexpress_ca15_tc2.h
> @@ -31,4 +31,8 @@
> #include "vexpress_common.h"
> #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2"
>
> +#define CONFIG_SYSFLAGS_ADDR 0x1c010030
> +
> +#define CONFIG_ARMV7_VIRT
> +
> #endif
This patch breaks vexpress_ca9x4 and vexpress_ca5x2:
vexpress_common.c: In function 'smp_set_core_boot_addr':
vexpress_common.c:269:2: error: 'CONFIG_SYSFLAGS_ADDR' undeclared
(first use in this function) vexpress_common.c:269:2: note: each
undeclared identifier is reported only once for each function it
appears in.
Please provide V5 series addressing this as well as Christoffer's and
Nikolay's comments.
Amicalement,
--
Albert.
_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm
