On Wed, May 8, 2013 at 12:07 AM, Mai Daftedar <mai.daftedar@xxxxxxxxx> wrote: > Dear All, > I am facing a problem with booting a fully working Linux system on the Fast > Models based Cortex-A15 simulation platform. > > I'm using the "KVM on ARM guide" to configure KVM on the ARM fast models > with CortexA15, however I get the following kernel panic error when I use > NFS to boot the kernel. > > VFS: Unable to mount root fs via NFS, trying floppy. > > Noting that the kernel semi-hosting arguments used are as follows: > kernel uImage --fdt host-a15.dtb -- earlyprintk console=ttyAMA0 mem=2048M > root=/dev/nfs nfsroot=192.168.x.x:/srv/nfsroot/ rw ip=dhcp > > Where can I be going wrong? > Is that literally the command line you use? You may want to change those x's then to the actual IP address of your host machine :) You also need to make sure that your host machine has NFS configured properly. -Christoffer _______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm
