Re: Arndale support

[Christoffer Dall <cdall@xxxxxxxxxxxxxxx>]

On Tue, Nov 20, 2012 at 9:35 AM, Christoffer Dall <cdall@xxxxxxxxxxxxxxx> wrote:

Hi there,

For those of you with an Arndale board who would like to boot KVM on it, I have a hack for u-boot and the kernel that makes things work.

Take a look here:

https://github.com/columbia/linux-kvm-arm/tree/lue_arndale-kvm

branch: lue_arndale-kvm

(use the arndale_kvm_defconfig if you like)

And the u-boot code here:

https://github.com/columbia/u-boot-arndale

branch: lue_arndale-kvm

oh, and here's some instructions for how to flash.

Use this as a starting point: https://wiki.linaro.org/Boards/Arndale/Setup/EnterpriseUbuntuServer

Make sure you flash the bl1 and the dt and such, and set up the right u-boot environment.

To flash this u-boot, do:

$ export ARCH=arm

$ export CROSS_COMPILE=<whatever you use>

$ cd u-boot-arndlae

$ make arndale5250  #builds both SPL and u-boot proper

$ sudo dd if=spl/smdk5250-spl.bin of=/dev/sdX bs=512 seek=17

$ sudo dd if=u-boot.bin of=/dev/sdX bs=512 seek=49

$ cd ../linux-kvm-arm

$ git checkout lue_arndale-kvm

$ make arndale_kvm_defconfig

$ make -j8 uImage

$ sudo dd if=arch/arm/boot/uImage of=/dev/sdX bs=512 seek=1105

and that's it.

-Chirstoffer

_______________________________________________
kvmarm mailing list
kvmarm@xxxxxxxxxxxxxxxxxxxxx
https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm