Hi, everyone. I tried to install the latest kvm on arm on arm simulator. After following the Development guide from http://systems.cs.columbia.edu/projects/kvm-arm/, I stuck in the step named "Testing the host system". When I started the simulator and telneted to localhost:5000, there's no output from the serial port. My Host: Debian6.0 x86_64 The simulator's output is listed bellow: --------------------------- model_shell ~/ARM/FastModelsPortfolio_7.1/examples/RTSM_VE/Build_Cortex-A15x1/Linux-Debug-GCC-4.4/cadi_system_Linux-Debug-GCC-4.4.so -f ./params boot-wrapper/linux-system-semi.axf terminal_0: Listening for serial connection on port 5000 terminal_1: Listening for serial connection on port 5001 terminal_2: Listening for serial connection on port 5002 terminal_3: Listening for serial connection on port 5003 INFO: mmc: no image file connected Simulation is started [bootwrapper] Loaded kernel: uImage [bootwrapper] WARNING: Ignoring uImage meta-data [bootwrapper] Loaded FDT: rtsm_ve-cortex_a15x1.dtb [bootwrapper] Kernel bootargs: console=ttyAMA0 mem=512M root=/dev/nfs nfsroot=10.131.250.61:/srv/ rw ip=10.131.250.62::10.131.250.1:255.255.254.0:arm-kvm::off ----------------------------- BTW, the linux kernel is cloned from columbia repository, not virtual open system. It would be nice if you have some idea to fix this problem. I'm glad to receive your response. Thanks. -- Best Regards, Jicheng Shi |
_______________________________________________ kvmarm mailing list kvmarm@xxxxxxxxxxxxxxxxxxxxx https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm