NASA's Space Shuttle Processing Status Report

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



09.28.06

Jessica Rye
Kennedy Space Center, Fla.
321-867-2468

STATUS REPORT: S-092806

NASA'S SPACE SHUTTLE PROCESSING STATUS REPORT

Note: NASA's Kennedy Space Center issues Space Shuttle Processing 
Status Reports periodically and is the source for information 
regarding processing activities associated with the vehicles and 
payloads.  If you are a member of the media and would like further 
information, visit:  
http://www.nasa.gov/centers/kennedy/news/index.html  

Mission: STS-116 - 20th International Space Station Flight (12A.1) - 
P5 Truss Segment 
Vehicle: Discovery (OV-103) 
Location: Orbiter Processing Facility Bay 3 
Launch Date: No earlier than Dec. 7, 2006 
Launch Pad: 39B 
Crew: Polansky, Oefelein, Curbeam, Higginbotham, Patrick, Fuglesang 
and Williams 
Inclination/Orbit Altitude: 51.6 degrees/122 nautical miles 

During today's Program Requirements Control Board meeting, Space 
Shuttle Program management moved the target launch date for Discovery 
to no earlier than Dec. 7, a week earlier than originally planned. 
This change allows for workers at both Kennedy Space Center and 
Johnson Space Center to enjoy additional time with their families 
during the December holidays. At this time, there is currently a 
range conflict with an Atlas V launch, which is currently on the 
range on December 8 and 9.

NASA will work with Lockheed-Martin and the Air Force to determine 
whether we will have a launch opportunity on December 7. Until this 
negotiation is complete, we understand that December 7th is a target 
and that we are not on the range schedule at this time. As always, 
the official launch date is not set until the Flight Readiness 
Review.

Technicians continue processing Discovery in the Orbiter Processing 
Facility for its launch to the International Space Station. The keel 
yoke assembly was installed in the payload bay last weekend. The 
assembly holds the payload in the bay during the mission. Workers 
completed the payload premate test in preparation of the Spacehab 
module being installed in the payload bay. Engineers are reviewing 
potential damage to orbiter Discovery's right-hand external tank door 
mechanism, which resulted during the process of reassembling the 
linkage following the change out of the power drive unit. No impact 
to the processing schedule is expected.

The external tank scheduled to fly with Discovery, designated ET-123, 
arrived by barge at Kennedy Space Center from Michoud Assembly 
Facility in New Orleans last week. The tank was lifted into the 
checkout cell in the Vehicle Assembly Building for final work prior 
to being mated to the solid rocket boosters. 

Mission: STS-117 - 21st International Space Station Flight (13A) - 
S3/S4 Truss Segment Solar Arrays 
Vehicle: Atlantis (OV-104) 
Location: Orbiter Processing Facility Bay 1 
Launch Date: No earlier than Feb. 22, 2007 
Launch Pad: 39B 
Crew: Sturckow, Archambault, Reilly, Forrester, Swanson and Olivas 
Inclination/Orbit Altitude: 51.6 degrees/122 nautical miles 

Following the landing of Atlantis on Sept. 21, technicians towed the 
vehicle into the Orbiter Processing Facility to begin preparing it 
for its next mission to the International Space Station. Thermal 
protection system post-flight inspection is 27 percent complete. 
Flight crew equipment removal was completed Monday. 

Technicians installed payload bay door strongbacks on Monday in 
preparation for the doors to open. On Wednesday, the doors were 
opened and the Ku-band antenna was deployed. Nose cap and chin panel 
thermography has begun and preparations are under way to begin 
thermography on the wing leading edges. 

Endeavour (OV-105)

Endeavour remains powered down in Orbiter Processing Facility bay 2 
and technicians continue to prepare the vehicle for its first launch 
following an extensive modification period. Technicians completed the 
environmental control and life support system functional test.

Work continues on the orbiter boom sensor system manipulator 
positioning mechanism. The mechanisms serve as the pedestals that 
hold the boom in place in the payload bay when it is not in use.

	
-end-



To subscribe to the list, send a message to: 
ksc-subscribe@newsletters.nasa.gov
To remove your address from the list, send a message to:
ksc-unsubscribe@newsletters.nasa.gov

[Index of Archives]     [KSC Site]     [NASA News]     [NASA Science News]     [JPL]     [Marshall Space Flight Center]     [NTSB]     [Yosemite News]     [Tuolumne Meadows Campground]     [STB]     [Deep Creek Forum]     [Cassini Status Reports]     [Telescopes]

  Powered by Linux