On 16/12/23 15:11, Baoquan He wrote:
On 12/15/23 at 12:17pm, Sourabh Jain wrote:
......
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 0f6ea35879ee..bcedb7625b1f 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -319,6 +319,7 @@ struct kimage {
#ifdef CONFIG_CRASH_HOTPLUG
/* If set, allow changes to elfcorehdr of kexec_load'd image */
unsigned int update_elfcorehdr:1;
+ unsigned int update_fdt:1;
Can we unify this to one flag, e.g hotplug_update?
With this, on x86_64, we will skip the sha calculation for elfcorehdr.
On ppc, we will skip the sha calculation for elfcorehdr and fdt.
Yeah, that's what I suggested to Eric. I can do that, but I see one
problem with powerpc or other platforms that need to skip SHA
for more kexec segments in addition to elfcorehdr.
`update_elfcorehdr` is set when the kexec tool sends the
`KEXEC_UPDATE_ELFCOREHDR`
flag to the kernel for the `kexec_load` system call.
Given that the kexec tool has already been updated to send the
`KEXEC_UPDATE_ELFCOREHDR` flag only when elfcorehdr is skipped from
SHA verification in generic code, now it would be tricky for architectures
to
determine whether kexec has skipped SHA verification for just elfcorehdr
or all segments needed on the platform with the same flag.
In kexec-tools, it's judged by do_hotplug to skip the elfcorehdr
segment. I am wondering how you skip the fdt segment when calculating
and verifying sha, only saw the update_fdt mark.
In the kexec tool where we loop through all the kexec segments to calculate
the SHA, there will be a arch call made to determine whether the segment
needs
to be excluded from SHA or not.
Now in the arch function if decide a specific segment needs to excluded then
corresponding flag is also set by arch function to communicate same with the
kernel.
About the existing KEXEC_UPDATE_ELFCOREHDR, we only rename the macro,
but still use the same value, could you think of what problem could be
caused between kernel and kexec-tools utility, the old and new version
compatibility?
Just changing the macro name will NOT help because the current kexec tool
enables the KEXEC_UPDATE_ELFCOREHDR = 0x00000004 kexec flag bit
if
the command argument --hotplug is passed to the kexec
and
the /sys/kernel/crash_elfcorehdr_size file exists in the system.
Now, let's say an architecture enables this feature in the kernel with
the assumption
that the 0x00000004 kexec flag bit is passed from the kexec tool when
all the required
kexec segments are skipped from SHA calculation. In this case, the
current kexec tool,
which passes the 0x00000004 kexec flag bit only when the elfcorehdr is
skipped, will
cause issues for architectures.
If it's about the new header files installed on older kernel, we can
change it like below? Fortunately only one release, 6.6 passed.
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
index 3d5b3d757bed..df6a6505e267 100644
--- a/include/uapi/linux/kexec.h
+++ b/include/uapi/linux/kexec.h
@@ -13,7 +13,7 @@
#define KEXEC_ON_CRASH 0x00000001
#define KEXEC_PRESERVE_CONTEXT 0x00000002
-#define KEXEC_UPDATE_FDT 0x00000008
+#define KEXEC_CRASH_HOTPLUG_UPDATE 0x00000004
#define KEXEC_UPDATE_ELFCOREHDR 0x00000004
#define KEXEC_ARCH_MASK 0xffff0000
/*
With my understanding, the kexec flag should be indicating the action,
the mem/cpu hotplug, but not relating to any detail. Imagine later
another segment need be skipped on one ARCH again, then another flag
need be added, this sounds not reasonable.
I strongly agree with you. The KEXEC_CRASH_HOTPLUG_UPDATE kexec flag
should be sufficient to inform the kernel that the kexec tool has been
updated
to support CPU/Memory hotplug for the kexec_load system call. Unfortunately,
we cannot use the 0x00000004 kexec flags bit for KEXEC_CRASH_HOTPLUG_UPDATE
at the moment.
What about using 0x00000008 for the KEXEC_CRASH_HOTPLUG_UPDATE flag?
I am aware that we are utilizing two kexec flag bits (0x00000004 and
0x00000008)
for the same feature, but what other options do we have?
Thanks,
Sourabh
Code snippet from the kexec tool:
main() {
...
/* NOTE: Xen KEXEC_LIVE_UPDATE and KEXEC_UPDATE_ELFCOREHDR collide */
if (do_hotplug) {
...
/* Indicate to the kernel it is ok to modify the elfcorehdr */
kexec_flags |= KEXEC_UPDATE_ELFCOREHDR;
}
...
}
Any suggestion how to handle this with just one kexec flag?
Thanks for the review.
Thanks,
Sourabh Jain
#endif
#ifdef ARCH_HAS_KIMAGE_ARCH
@@ -396,9 +397,10 @@ bool kexec_load_permitted(int kexec_image_type);
/* List of defined/legal kexec flags */
#ifndef CONFIG_KEXEC_JUMP
-#define KEXEC_FLAGS (KEXEC_ON_CRASH | KEXEC_UPDATE_ELFCOREHDR)
+#define KEXEC_FLAGS (KEXEC_ON_CRASH | KEXEC_UPDATE_ELFCOREHDR | KEXEC_UPDATE_FDT)
#else
-#define KEXEC_FLAGS (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT | KEXEC_UPDATE_ELFCOREHDR)
+#define KEXEC_FLAGS (KEXEC_ON_CRASH | KEXEC_PRESERVE_CONTEXT | KEXEC_UPDATE_ELFCOREHDR | \
+ KEXEC_UPDATE_FDT)
#endif
/* List of defined/legal kexec file flags */
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
index 01766dd839b0..3d5b3d757bed 100644
--- a/include/uapi/linux/kexec.h
+++ b/include/uapi/linux/kexec.h
@@ -13,6 +13,7 @@
#define KEXEC_ON_CRASH 0x00000001
#define KEXEC_PRESERVE_CONTEXT 0x00000002
#define KEXEC_UPDATE_ELFCOREHDR 0x00000004
+#define KEXEC_UPDATE_FDT 0x00000008
#define KEXEC_ARCH_MASK 0xffff0000
/*
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 8f35a5a42af8..97eb151cd931 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -132,6 +132,8 @@ static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
#ifdef CONFIG_CRASH_HOTPLUG
if (flags & KEXEC_UPDATE_ELFCOREHDR)
image->update_elfcorehdr = 1;
+ if (flags & KEXEC_UPDATE_FDT)
+ image->update_fdt = 1;
#endif
ret = machine_kexec_prepare(image);
--
2.41.0
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
