Move the functions update_cpus_node and get_crash_memory_ranges from
kexec/file_load_64.c to kexec/core_64.c to make these functions usable
by other kexec components.
get_crash_memory_ranges uses functions defined in ranges.c, so take
ranges.c out of CONFIG_KEXEC_FILE.
Later in the series, these functions are utilized for in-kernel updates
to kdump image during CPU/Memory hotplug or online/offline events for
both kexec_load and kexec_file_load syscalls.
There is no intended functional change.
Signed-off-by: Sourabh Jain <sourabhjain@xxxxxxxxxxxxx>
Reviewed-by: Laurent Dufour <laurent.dufour@xxxxxxxxxx>
Cc: Akhil Raj <lf32.dev@xxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Aneesh Kumar K.V <aneesh.kumar@xxxxxxxxxx>
Cc: Baoquan He <bhe@xxxxxxxxxx>
Cc: Borislav Petkov (AMD) <bp@xxxxxxxxx>
Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Cc: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxxxxxxxx>
Cc: Dave Young <dyoung@xxxxxxxxxx>
Cc: David Hildenbrand <david@xxxxxxxxxx>
Cc: Eric DeVolder <eric.devolder@xxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Hari Bathini <hbathini@xxxxxxxxxxxxx>
Cc: Mahesh Salgaonkar <mahesh@xxxxxxxxxxxxx>
Cc: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
Cc: Mimi Zohar <zohar@xxxxxxxxxxxxx>
Cc: Naveen N Rao <naveen@xxxxxxxxxx>
Cc: Oscar Salvador <osalvador@xxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Valentin Schneider <vschneid@xxxxxxxxxx>
Cc: Vivek Goyal <vgoyal@xxxxxxxxxx>
Cc: kexec@xxxxxxxxxxxxxxxxxxx
Cc: x86@xxxxxxxxxx
---
arch/powerpc/include/asm/kexec.h | 6 ++
arch/powerpc/kexec/Makefile | 4 +-
arch/powerpc/kexec/core_64.c | 166 ++++++++++++++++++++++++++++++
arch/powerpc/kexec/file_load_64.c | 162 -----------------------------
4 files changed, 174 insertions(+), 164 deletions(-)
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index e1b43aa12175..562e1bb689da 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -108,6 +108,12 @@ void crash_free_reserved_phys_range(unsigned long begin, unsigned long end);
#endif /* CONFIG_PPC_RTAS */
#endif /* CONFIG_CRASH_DUMP */
+#ifdef CONFIG_PPC64
+struct crash_mem;
+int update_cpus_node(void *fdt);
+int get_crash_memory_ranges(struct crash_mem **mem_ranges);
+#endif /* CONFIG_PPC64 */
+
#ifdef CONFIG_KEXEC_FILE
extern const struct kexec_file_ops kexec_elf64_ops;
diff --git a/arch/powerpc/kexec/Makefile b/arch/powerpc/kexec/Makefile
index 0c2abe7f9908..f2ed5b85b912 100644
--- a/arch/powerpc/kexec/Makefile
+++ b/arch/powerpc/kexec/Makefile
@@ -3,11 +3,11 @@
# Makefile for the linux kernel.
#
-obj-y += core.o crash.o core_$(BITS).o
+obj-y += core.o crash.o ranges.o core_$(BITS).o
obj-$(CONFIG_PPC32) += relocate_32.o
-obj-$(CONFIG_KEXEC_FILE) += file_load.o ranges.o file_load_$(BITS).o elf_$(BITS).o
+obj-$(CONFIG_KEXEC_FILE) += file_load.o file_load_$(BITS).o elf_$(BITS).o
# Disable GCOV, KCOV & sanitizers in odd or sensitive code
GCOV_PROFILE_core_$(BITS).o := n
diff --git a/arch/powerpc/kexec/core_64.c b/arch/powerpc/kexec/core_64.c
index 0bee7ca9a77c..9966b51d9aa8 100644
--- a/arch/powerpc/kexec/core_64.c
+++ b/arch/powerpc/kexec/core_64.c
@@ -17,6 +17,8 @@
#include <linux/cpu.h>
#include <linux/hardirq.h>
#include <linux/of.h>
+#include <linux/libfdt.h>
+#include <linux/memblock.h>
#include <asm/page.h>
#include <asm/current.h>
@@ -30,6 +32,8 @@
#include <asm/hw_breakpoint.h>
#include <asm/svm.h>
#include <asm/ultravisor.h>
+#include <asm/kexec_ranges.h>
+#include <asm/crashdump-ppc64.h>
int machine_kexec_prepare(struct kimage *image)
{
@@ -377,6 +381,168 @@ void default_machine_kexec(struct kimage *image)
/* NOTREACHED */
}
+/**
+ * get_crash_memory_ranges - Get crash memory ranges. This list includes
+ * first/crashing kernel's memory regions that
+ * would be exported via an elfcore.
+ * @mem_ranges: Range list to add the memory ranges to.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int get_crash_memory_ranges(struct crash_mem **mem_ranges)
+{
+ phys_addr_t base, end;
+ struct crash_mem *tmem;
+ u64 i;
+ int ret;
+
+ for_each_mem_range(i, &base, &end) {
+ u64 size = end - base;
+
+ /* Skip backup memory region, which needs a separate entry */
+ if (base == BACKUP_SRC_START) {
+ if (size > BACKUP_SRC_SIZE) {
+ base = BACKUP_SRC_END + 1;
+ size -= BACKUP_SRC_SIZE;
+ } else
+ continue;
+ }
+
+ ret = add_mem_range(mem_ranges, base, size);
+ if (ret)
+ goto out;
+
+ /* Try merging adjacent ranges before reallocation attempt */
+ if ((*mem_ranges)->nr_ranges == (*mem_ranges)->max_nr_ranges)
+ sort_memory_ranges(*mem_ranges, true);
+ }
+
+ /* Reallocate memory ranges if there is no space to split ranges */
+ tmem = *mem_ranges;
+ if (tmem && (tmem->nr_ranges == tmem->max_nr_ranges)) {
+ tmem = realloc_mem_ranges(mem_ranges);
+ if (!tmem)
+ goto out;
+ }
+
+ /* Exclude crashkernel region */
+ ret = crash_exclude_mem_range(tmem, crashk_res.start, crashk_res.end);
+ if (ret)
+ goto out;
+
+ /*
+ * FIXME: For now, stay in parity with kexec-tools but if RTAS/OPAL
+ * regions are exported to save their context at the time of
+ * crash, they should actually be backed up just like the
+ * first 64K bytes of memory.
+ */
+ ret = add_rtas_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ ret = add_opal_mem_range(mem_ranges);
+ if (ret)
+ goto out;
+
+ /* create a separate program header for the backup region */
+ ret = add_mem_range(mem_ranges, BACKUP_SRC_START, BACKUP_SRC_SIZE);
+ if (ret)
+ goto out;
+
+ sort_memory_ranges(*mem_ranges, false);
+out:
+ if (ret)
+ pr_err("Failed to setup crash memory ranges\n");
+ return ret;
+}
+
+/**
+ * add_node_props - Reads node properties from device node structure and add
+ * them to fdt.
+ * @fdt: Flattened device tree of the kernel
+ * @node_offset: offset of the node to add a property at
+ * @dn: device node pointer
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
+{
+ int ret = 0;
+ struct property *pp;
+
+ if (!dn)
+ return -EINVAL;
+
+ for_each_property_of_node(dn, pp) {
+ ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
+ if (ret < 0) {
+ pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * update_cpus_node - Update cpus node of flattened device tree using of_root
+ * device node.
+ * @fdt: Flattened device tree of the kernel.
+ *
+ * Returns 0 on success, negative errno on error.
+ */
+int update_cpus_node(void *fdt)
+{
+ struct device_node *cpus_node, *dn;
+ int cpus_offset, cpus_subnode_offset, ret = 0;
+
+ cpus_offset = fdt_path_offset(fdt, "/cpus");
+ if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
+ pr_err("Malformed device tree: error reading /cpus node: %s\n",
+ fdt_strerror(cpus_offset));
+ return cpus_offset;
+ }
+
+ if (cpus_offset > 0) {
+ ret = fdt_del_node(fdt, cpus_offset);
+ if (ret < 0) {
+ pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
+ return -EINVAL;
+ }
+ }
+
+ /* Add cpus node to fdt */
+ cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
+ if (cpus_offset < 0) {
+ pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
+ return -EINVAL;
+ }
+
+ /* Add cpus node properties */
+ cpus_node = of_find_node_by_path("/cpus");
+ ret = add_node_props(fdt, cpus_offset, cpus_node);
+ of_node_put(cpus_node);
+ if (ret < 0)
+ return ret;
+
+ /* Loop through all subnodes of cpus and add them to fdt */
+ for_each_node_by_type(dn, "cpu") {
+ cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
+ if (cpus_subnode_offset < 0) {
+ pr_err("Unable to add %s subnode: %s\n", dn->full_name,
+ fdt_strerror(cpus_subnode_offset));
+ ret = cpus_subnode_offset;
+ goto out;
+ }
+
+ ret = add_node_props(fdt, cpus_subnode_offset, dn);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ of_node_put(dn);
+ return ret;
+}
+
#ifdef CONFIG_PPC_64S_HASH_MMU
/* Values we need to export to the second kernel via the device tree. */
static __be64 htab_base;
diff --git a/arch/powerpc/kexec/file_load_64.c b/arch/powerpc/kexec/file_load_64.c
index 961a6dd67365..9c29f913112d 100644
--- a/arch/powerpc/kexec/file_load_64.c
+++ b/arch/powerpc/kexec/file_load_64.c
@@ -134,81 +134,6 @@ static int get_usable_memory_ranges(struct crash_mem **mem_ranges)
return ret;
}
-/**
- * get_crash_memory_ranges - Get crash memory ranges. This list includes
- * first/crashing kernel's memory regions that
- * would be exported via an elfcore.
- * @mem_ranges: Range list to add the memory ranges to.
- *
- * Returns 0 on success, negative errno on error.
- */
-static int get_crash_memory_ranges(struct crash_mem **mem_ranges)
-{
- phys_addr_t base, end;
- struct crash_mem *tmem;
- u64 i;
- int ret;
-
- for_each_mem_range(i, &base, &end) {
- u64 size = end - base;
-
- /* Skip backup memory region, which needs a separate entry */
- if (base == BACKUP_SRC_START) {
- if (size > BACKUP_SRC_SIZE) {
- base = BACKUP_SRC_END + 1;
- size -= BACKUP_SRC_SIZE;
- } else
- continue;
- }
-
- ret = add_mem_range(mem_ranges, base, size);
- if (ret)
- goto out;
-
- /* Try merging adjacent ranges before reallocation attempt */
- if ((*mem_ranges)->nr_ranges == (*mem_ranges)->max_nr_ranges)
- sort_memory_ranges(*mem_ranges, true);
- }
-
- /* Reallocate memory ranges if there is no space to split ranges */
- tmem = *mem_ranges;
- if (tmem && (tmem->nr_ranges == tmem->max_nr_ranges)) {
- tmem = realloc_mem_ranges(mem_ranges);
- if (!tmem)
- goto out;
- }
-
- /* Exclude crashkernel region */
- ret = crash_exclude_mem_range(tmem, crashk_res.start, crashk_res.end);
- if (ret)
- goto out;
-
- /*
- * FIXME: For now, stay in parity with kexec-tools but if RTAS/OPAL
- * regions are exported to save their context at the time of
- * crash, they should actually be backed up just like the
- * first 64K bytes of memory.
- */
- ret = add_rtas_mem_range(mem_ranges);
- if (ret)
- goto out;
-
- ret = add_opal_mem_range(mem_ranges);
- if (ret)
- goto out;
-
- /* create a separate program header for the backup region */
- ret = add_mem_range(mem_ranges, BACKUP_SRC_START, BACKUP_SRC_SIZE);
- if (ret)
- goto out;
-
- sort_memory_ranges(*mem_ranges, false);
-out:
- if (ret)
- pr_err("Failed to setup crash memory ranges\n");
- return ret;
-}
-
/**
* get_reserved_memory_ranges - Get reserve memory ranges. This list includes
* memory regions that should be added to the
@@ -1019,93 +944,6 @@ unsigned int kexec_extra_fdt_size_ppc64(struct kimage *image)
return extra_size;
}
-/**
- * add_node_props - Reads node properties from device node structure and add
- * them to fdt.
- * @fdt: Flattened device tree of the kernel
- * @node_offset: offset of the node to add a property at
- * @dn: device node pointer
- *
- * Returns 0 on success, negative errno on error.
- */
-static int add_node_props(void *fdt, int node_offset, const struct device_node *dn)
-{
- int ret = 0;
- struct property *pp;
-
- if (!dn)
- return -EINVAL;
-
- for_each_property_of_node(dn, pp) {
- ret = fdt_setprop(fdt, node_offset, pp->name, pp->value, pp->length);
- if (ret < 0) {
- pr_err("Unable to add %s property: %s\n", pp->name, fdt_strerror(ret));
- return ret;
- }
- }
- return ret;
-}
-
-/**
- * update_cpus_node - Update cpus node of flattened device tree using of_root
- * device node.
- * @fdt: Flattened device tree of the kernel.
- *
- * Returns 0 on success, negative errno on error.
- */
-static int update_cpus_node(void *fdt)
-{
- struct device_node *cpus_node, *dn;
- int cpus_offset, cpus_subnode_offset, ret = 0;
-
- cpus_offset = fdt_path_offset(fdt, "/cpus");
- if (cpus_offset < 0 && cpus_offset != -FDT_ERR_NOTFOUND) {
- pr_err("Malformed device tree: error reading /cpus node: %s\n",
- fdt_strerror(cpus_offset));
- return cpus_offset;
- }
-
- if (cpus_offset > 0) {
- ret = fdt_del_node(fdt, cpus_offset);
- if (ret < 0) {
- pr_err("Error deleting /cpus node: %s\n", fdt_strerror(ret));
- return -EINVAL;
- }
- }
-
- /* Add cpus node to fdt */
- cpus_offset = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"), "cpus");
- if (cpus_offset < 0) {
- pr_err("Error creating /cpus node: %s\n", fdt_strerror(cpus_offset));
- return -EINVAL;
- }
-
- /* Add cpus node properties */
- cpus_node = of_find_node_by_path("/cpus");
- ret = add_node_props(fdt, cpus_offset, cpus_node);
- of_node_put(cpus_node);
- if (ret < 0)
- return ret;
-
- /* Loop through all subnodes of cpus and add them to fdt */
- for_each_node_by_type(dn, "cpu") {
- cpus_subnode_offset = fdt_add_subnode(fdt, cpus_offset, dn->full_name);
- if (cpus_subnode_offset < 0) {
- pr_err("Unable to add %s subnode: %s\n", dn->full_name,
- fdt_strerror(cpus_subnode_offset));
- ret = cpus_subnode_offset;
- goto out;
- }
-
- ret = add_node_props(fdt, cpus_subnode_offset, dn);
- if (ret < 0)
- goto out;
- }
-out:
- of_node_put(dn);
- return ret;
-}
-
static int copy_property(void *fdt, int node_offset, const struct device_node *dn,
const char *propname)
{
--
2.41.0
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
