The larger focus of the TrenchBoot project (https://github.com/TrenchBoot) is to enhance the boot security and integrity in a unified manner. The first area of focus has been on the Trusted Computing Group's Dynamic Launch for establishing a hardware Root of Trust for Measurement, also know as DRTM (Dynamic Root of Trust for Measurement). The project has been and continues to work on providing a unified means to Dynamic Launch that is a cross-platform (Intel and AMD) and cross-architecture (x86 and Arm), with our recent involvment in the upcoming Arm DRTM specification. The order of introducing DRTM to the Linux kernel follows the maturity of DRTM in the architectures. Intel's Trusted eXecution Technology (TXT) is present today and only requires a preamble loader, e.g. a boot loader, and an OS kernel that is TXT-aware. AMD DRTM implementation has been present since the introduction of AMD-V but requires an additional component that is AMD specific and referred to in the specification as the Secure Loader, which the TrenchBoot project has an active prototype in development. Finally Arm's implementation is in specification development stage and the project is looking to support it when it becomes available. This patchset provides detailed documentation of DRTM, the approach used for adding the capbility, and relevant API/ABI documentation. In addition to the documentation the patch set introduces Intel TXT support as the first platform for Linux Secure Launch. A quick note on terminology. The larger open source project itself is called TrenchBoot, which is hosted on Github (links below). The kernel feature enabling the use of Dynamic Launch technology is referred to as "Secure Launch" within the kernel code. As such the prefixes sl_/SL_ or slaunch/SLAUNCH will be seen in the code. The stub code discussed above is referred to as the SL stub. The Secure Launch feature starts with patch #2. Patch #1 was authored by Arvind Sankar. There is no further status on this patch at this point but Secure Launch depends on it so it is included with the set. ## NOTE: EFI-STUB CONFLICTS The primary focus of the v7 patch set was to align with Thomas Gleixner's changes to support parallel CPU bring-up on x86 platforms. In the process of rebasing and testing v7, it was discovered that there were significant changes to the efi-stub code. As a result, the efi-stub patch was dropped pending maintainer feedback on an appropriate means to re-integrate Secure Launch. The primary goal being to best align the DL stub functionality with efi-stub design. It was discovered that the efi-stub now subsumes all the setup which head_64.S was responsible. When attempting to rebase the DL stub patch on these changes, it became apparent that it would not be a simple relocation of the Secure Launch call. There are numerous things, such as efi-stub decompressing the main line kernel, which make simple relocation challenging. There may also be additional changes that should be considered when integrating Secure Launch support. It would be beneficial, and much appreciated, to obtain guidance from maintainers. Upon successful collaboration with the efi-stub maintainers, a Secure Launch v8 series will be produce to re-introduce the DL stub patch. Links: The TrenchBoot project including documentation: https://trenchboot.org The TrenchBoot project on Github: https://github.com/trenchboot Intel TXT is documented in its own specification and in the SDM Instruction Set volume: https://www.intel.com/content/dam/www/public/us/en/documents/guides/intel-txt-software-development-guide.pdf https://software.intel.com/en-us/articles/intel-sdm AMD SKINIT is documented in the System Programming manual: https://www.amd.com/system/files/TechDocs/24593.pdf GRUB2 pre-launch support branch (WIP): https://github.com/TrenchBoot/grub/tree/grub-sl-fc-38-dlstub Patch set based on commit: torvolds/master/6bc986ab839c844e78a2333a02e55f02c9e57935 Thanks Ross Philipson and Daniel P. Smith Changes in v2: - Modified 32b entry code to prevent causing relocations in the compressed kernel. - Dropped patches for compressed kernel TPM PCR extender. - Modified event log code to insert log delimiter events and not rely on TPM access. - Stop extending PCRs in the early Secure Launch stub code. - Removed Kconfig options for hash algorithms and use the algorithms the ACM used. - Match Secure Launch measurement algorithm use to those reported in the TPM 2.0 event log. - Read the TPM events out of the TPM and extend them into the PCRs using the mainline TPM driver. This is done in the late initcall module. - Allow use of alternate PCR 19 and 20 for post ACM measurements. - Add Kconfig constraints needed by Secure Launch (disable KASLR and add x2apic dependency). - Fix testing of SL_FLAGS when determining if Secure Launch is active and the architecture is TXT. - Use SYM_DATA_START_LOCAL macros in early entry point code. - Security audit changes: - Validate buffers passed to MLE do not overlap the MLE and are properly laid out. - Validate buffers and memory regions used by the MLE are protected by IOMMU PMRs. - Force IOMMU to not use passthrough mode during a Secure Launch. - Prevent KASLR use during a Secure Launch. Changes in v3: - Introduce x86 documentation patch to provide background, overview and configuration/ABI information for the Secure Launch kernel feature. - Remove the IOMMU patch with special cases for disabling IOMMU passthrough. Configuring the IOMMU is now a documentation matter in the previously mentioned new patch. - Remove special case KASLR disabling code. Configuring KASLR is now a documentation matter in the previously mentioned new patch. - Fix incorrect panic on TXT public register read. - Properly handle and measure setup_indirect bootparams in the early launch code. - Use correct compressed kernel image base address when testing buffers in the early launch stub code. This bug was introduced by the changes to avoid relocation in the compressed kernel. - Use CPUID feature bits instead of CPUID vendor strings to determine if SMX mode is supported and the system is Intel. - Remove early NMI re-enable on the BSP. This can be safely done later on the BSP after an IDT is setup. Changes in v4: - Expand the cover letter to provide more context to the order that DRTM support will be added. - Removed debug tracing in TPM request locality funciton and fixed local variable declarations. - Fixed missing break in default case in slmodule.c. - Reworded commit messages in patches 1 and 2 per suggestions. Changes in v5: - Comprehensive documentation rewrite. - Use boot param loadflags to communicate Secure Launch status to kernel proper. - Fix incorrect check of X86_FEATURE_BIT_SMX bit. - Rename the alternate details and authorities PCR support. - Refactor the securityfs directory and file setup in slmodule.c. - Misc. cleanup from internal code reviews. - Use reverse fir tree format for variables. Changes in v6: - Support for the new Secure Launch Resourse Table that standardizes the information passed and forms the ABI between the pre and post launch code. - Support for booting Linux through the EFI stub entry point and then being able to do a Secure Launch once EFI stub is done and EBS is called. - Updates to the documentation to reflect the previous two items listed. Changes in v7: - Switch to using MONITOR/MWAIT instead of NMIs to park the APs for later bringup by the SMP code. - Use static inline dummy functions instead of macros when the Secure Launch feature is disabled. - Move early SHA1 code to lib/crypto and pull it in from there. - Numerous formatting fixes from comments on LKML. - Remove efi-stub/DL stub patch temporarily for redesign/rework. Arvind Sankar (1): x86/boot: Place kernel_info at a fixed offset Daniel P. Smith (2): x86: Add early SHA support for Secure Launch early measurements x86: Secure Launch late initcall platform module Ross Philipson (10): Documentation/x86: Secure Launch kernel documentation x86: Secure Launch Kconfig x86: Secure Launch Resource Table header file x86: Secure Launch main header file x86: Secure Launch kernel early boot stub x86: Secure Launch kernel late boot stub x86: Secure Launch SMP bringup support kexec: Secure Launch kexec SEXIT support reboot: Secure Launch SEXIT support on reboot paths tpm: Allow locality 2 to be set when initializing the TPM for Secure Launch Documentation/arch/x86/boot.rst | 21 + Documentation/security/index.rst | 1 + .../security/launch-integrity/index.rst | 11 + .../security/launch-integrity/principles.rst | 320 ++++++++ .../secure_launch_details.rst | 584 +++++++++++++++ .../secure_launch_overview.rst | 226 ++++++ arch/x86/Kconfig | 12 + arch/x86/boot/compressed/Makefile | 3 + arch/x86/boot/compressed/early_sha1.c | 12 + arch/x86/boot/compressed/early_sha256.c | 6 + arch/x86/boot/compressed/head_64.S | 34 + arch/x86/boot/compressed/kernel_info.S | 53 +- arch/x86/boot/compressed/kernel_info.h | 12 + arch/x86/boot/compressed/sl_main.c | 582 +++++++++++++++ arch/x86/boot/compressed/sl_stub.S | 705 ++++++++++++++++++ arch/x86/boot/compressed/vmlinux.lds.S | 6 + arch/x86/include/asm/msr-index.h | 5 + arch/x86/include/asm/realmode.h | 3 + arch/x86/include/uapi/asm/bootparam.h | 1 + arch/x86/kernel/Makefile | 2 + arch/x86/kernel/asm-offsets.c | 20 + arch/x86/kernel/reboot.c | 10 + arch/x86/kernel/setup.c | 3 + arch/x86/kernel/slaunch.c | 598 +++++++++++++++ arch/x86/kernel/slmodule.c | 517 +++++++++++++ arch/x86/kernel/smpboot.c | 56 +- arch/x86/realmode/init.c | 3 + arch/x86/realmode/rm/header.S | 3 + arch/x86/realmode/rm/trampoline_64.S | 32 + drivers/char/tpm/tpm-chip.c | 9 +- drivers/iommu/intel/dmar.c | 4 + include/crypto/sha1.h | 1 + include/linux/slaunch.h | 542 ++++++++++++++ include/linux/slr_table.h | 270 +++++++ kernel/kexec_core.c | 4 + lib/crypto/sha1.c | 81 ++ 36 files changed, 4746 insertions(+), 6 deletions(-) create mode 100644 Documentation/security/launch-integrity/index.rst create mode 100644 Documentation/security/launch-integrity/principles.rst create mode 100644 Documentation/security/launch-integrity/secure_launch_details.rst create mode 100644 Documentation/security/launch-integrity/secure_launch_overview.rst create mode 100644 arch/x86/boot/compressed/early_sha1.c create mode 100644 arch/x86/boot/compressed/early_sha256.c create mode 100644 arch/x86/boot/compressed/kernel_info.h create mode 100644 arch/x86/boot/compressed/sl_main.c create mode 100644 arch/x86/boot/compressed/sl_stub.S create mode 100644 arch/x86/kernel/slaunch.c create mode 100644 arch/x86/kernel/slmodule.c create mode 100644 include/linux/slaunch.h create mode 100644 include/linux/slr_table.h -- 2.39.3 _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
