On 10/5/23 14:25, Tushar Sugandhi wrote:
IMA allocates memory and dumps the measurement during kexec soft reboot
as a single function call ima_dump_measurement_list(). It gets called
during kexec 'load' operation. It results in the IMA measurements
between the window of kexec 'load' and 'execute' getting dropped when the
system boots into the new Kernel. One of the kexec requirements is the
segment size cannot change between the 'load' and the 'execute'.
Therefore, to address this problem, ima_dump_measurement_list() needs
to be refactored to allocate the memory at kexec 'load', and dump the
measurements at kexec 'execute'. The function that allocates the memory
should handle the scenario where the kexec load is called multiple times.
Refactor ima_dump_measurement_list() to move the memory allocation part
to a separate function ima_alloc_kexec_buf() to allocate buffer of size
'kexec_segment_size' at kexec 'load'. Make the local variables in
function ima_dump_measurement_list() global, so that they can be accessed
from ima_alloc_kexec_buf(). Make necessary changes to the function
ima_add_kexec_buffer() to call the above two functions.
Signed-off-by: Tushar Sugandhi<tusharsu@xxxxxxxxxxxxxxxxxxx>
---
security/integrity/ima/ima_kexec.c | 126 +++++++++++++++++++++--------
1 file changed, 93 insertions(+), 33 deletions(-)
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
index 419dc405c831..307e07991865 100644
--- a/security/integrity/ima/ima_kexec.c
+++ b/security/integrity/ima/ima_kexec.c
@@ -15,61 +15,114 @@
#include "ima.h"
#ifdef CONFIG_IMA_KEXEC
+struct seq_file ima_kexec_file;
+struct ima_kexec_hdr ima_khdr;
Since you are only populating the buffer at kexec 'execute' time, you
should be able to move this header into the function where it is needed.
+
+void ima_clear_kexec_file(void)
+{
+ vfree(ima_kexec_file.buf);
I would pass the ima_kexec_file onto this function here as a parameter
rather than accessing the file-static variable. I find this better to
read once you look at ima_clear_kexec_file() further below and wonder
why it doesn't take a parameter.
+ ima_kexec_file.buf = NULL;
+ ima_kexec_file.size = 0;
+ ima_kexec_file.read_pos = 0;
+ ima_kexec_file.count = 0;
+}
+
+static int ima_alloc_kexec_buf(size_t kexec_segment_size)
Call it segment size to avoid the later kexec_segment_size static
variable in this file.
+{
+ if ((kexec_segment_size == 0) ||
+ (kexec_segment_size == ULONG_MAX) ||
+ ((kexec_segment_size >> PAGE_SHIFT) > totalram_pages() / 2)) {
These tests are already done before ima_alloca_kexec_buf() is called.
Also, kexec_segment_size cannot be 0.
+ pr_err("%s: Invalid segment size for kexec: %zu\n",
+ __func__, kexec_segment_size);
+ return -EINVAL;
+ }
+
+ /*
+ * If kexec load was called before, clear the existing buffer
+ * before allocating a new one
+ */
+ if (ima_kexec_file.buf)
+ ima_clear_kexec_file();
+
ima_clear_file(&ima_kexec_file);
+ /* segment size can't change between kexec load and execute */
+ ima_kexec_file.buf = vmalloc(kexec_segment_size);
+ if (!ima_kexec_file.buf) {
+ pr_err("%s: No memory for ima kexec measurement buffer\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ ima_kexec_file.size = kexec_segment_size;
+ ima_kexec_file.read_pos = 0;
+ ima_kexec_file.count = sizeof(ima_khdr); /* reserved space */
+
+ memset(&ima_khdr, 0, sizeof(ima_khdr));
+ ima_khdr.version = 1;
Move this into ima_dump_measurement_list() since it's only used there
once and getting rid of this file-static variable is a plus.
+
+ return 0;
+}
+
static int ima_dump_measurement_list(unsigned long *buffer_size, void **buffer,
unsigned long segment_size)
{
struct ima_queue_entry *qe;
- struct seq_file file;
- struct ima_kexec_hdr khdr;
Don't remove it from here.
int ret = 0;
- /* segment size can't change between kexec load and execute */
- file.buf = vmalloc(segment_size);
- if (!file.buf) {
- ret = -ENOMEM;
- goto out;
+ if (!ima_kexec_file.buf) {
+ pr_err("%s: Kexec file buf not allocated\n",
+ __func__);
+ return -EINVAL;
}
- file.size = segment_size;
- file.read_pos = 0;
- file.count = sizeof(khdr); /* reserved space */
+ /*
+ * Ensure the kexec buffer is large enough to hold ima_khdr
+ */
+ if (ima_kexec_file.size < sizeof(ima_khdr)) {
+ pr_err("%s: Kexec buffer size too low to hold ima_khdr\n",
+ __func__);
+ ima_clear_kexec_file();
+ return -ENOMEM;
+ }
- memset(&khdr, 0, sizeof(khdr));
- khdr.version = 1;
+ /*
+ * If we reach here, then there is enough memory
+ * of size kexec_segment_size in ima_kexec_file.buf
+ * to copy at least partial IMA log.
+ * Make best effort to copy as many IMA measurements
+ * as possible.
You can reformat these comments to (at least) 80 columns.
+ */
list_for_each_entry_rcu(qe, &ima_measurements, later) {
- if (file.count < file.size) {
- khdr.count++;
- ima_measurements_show(&file, qe);
+ if (ima_kexec_file.count < ima_kexec_file.size) {
+ ima_khdr.count++;
+ ima_measurements_show(&ima_kexec_file, qe);
} else {
- ret = -EINVAL;
+ ret = EFBIG;
Hm, you are not looking for EFBIG after calling this function and the
overrun could actually also happen in the ima_measurement_show() above
and go unreported if this is the last element.
if (ima_kexec_file.count < ima_kexec_file.size) {
ima_khdr.count++;
ima_measurements_show(&ima_kexec_file, qe);
}
if (ima_kexec_file.count >= ima_kexec_file.size) {
/* leave ret = 0; caller doesn't need to worry about undersized buffer */
pr_err("%s: IMA log file is too big for Kexec buf\n",
__func__);
break;
}
+ pr_err("%s: IMA log file is too big for Kexec buf\n",
+ __func__);
break;
}
}
- if (ret < 0)
- goto out;
-
/*
* fill in reserved space with some buffer details
* (eg. version, buffer size, number of measurements)
*/
- khdr.buffer_size = file.count;
+ ima_khdr.buffer_size = ima_kexec_file.count;
if (ima_canonical_fmt) {
- khdr.version = cpu_to_le16(khdr.version);
- khdr.count = cpu_to_le64(khdr.count);
- khdr.buffer_size = cpu_to_le64(khdr.buffer_size);
+ ima_khdr.version = cpu_to_le16(ima_khdr.version);
+ ima_khdr.count = cpu_to_le64(ima_khdr.count);
+ ima_khdr.buffer_size = cpu_to_le64(ima_khdr.buffer_size);
}
- memcpy(file.buf, &khdr, sizeof(khdr));
+ memcpy(ima_kexec_file.buf, &ima_khdr, sizeof(ima_khdr));
print_hex_dump_debug("ima dump: ", DUMP_PREFIX_NONE, 16, 1,
- file.buf, file.count < 100 ? file.count : 100,
+ ima_kexec_file.buf, ima_kexec_file.count < 100 ?
+ ima_kexec_file.count : 100,
true);
- *buffer_size = file.count;
- *buffer = file.buf;
-out:
- if (ret == -EINVAL)
- vfree(file.buf);
+ *buffer_size = ima_kexec_file.count;
+ *buffer = ima_kexec_file.buf;
+
return ret;
}
@@ -108,13 +161,20 @@ void ima_add_kexec_buffer(struct kimage *image)
return;
}
- ima_dump_measurement_list(&kexec_buffer_size, &kexec_buffer,
- kexec_segment_size);
- if (!kexec_buffer) {
+ ret = ima_alloc_kexec_buf(kexec_segment_size);
+ if (ret < 0) {
pr_err("Not enough memory for the kexec measurement buffer.\n");
return;
}
+ ret = ima_dump_measurement_list(&kexec_buffer_size, &kexec_buffer,
+ kexec_segment_size);
+ if (ret < 0) {
+ pr_err("%s: Failed to dump IMA measurements. Error:%d.\n",
+ __func__, ret);
+ return;
+ }
+
kbuf.buffer = kexec_buffer;
kbuf.bufsz = kexec_buffer_size;
kbuf.memsz = kexec_segment_size;
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
