From: Jeremy Linton <jeremy.linton@xxxxxxx>
The linux kernel CONFIG_ZBOOT option creates
self decompressing PE kernel images. So this means
that kexec should have a generic understanding of
the format which may be used by multiple arches.
So lets add an arch independent validation
and decompression routine.
Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
[Modified by Pingfan to adapt the new probe interface]
Signed-off-by: Pingfan Liu <piliu@xxxxxxxxxx>
To: kexec@xxxxxxxxxxxxxxxxxxx
Cc: horms@xxxxxxxxxxxx
Cc: ardb@xxxxxxxxxx
Cc: jeremy.linton@xxxxxxx
---
include/kexec-pe-zboot.h | 15 +++++
kexec/Makefile | 1 +
kexec/kexec-pe-zboot.c | 134 +++++++++++++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 include/kexec-pe-zboot.h
create mode 100644 kexec/kexec-pe-zboot.c
diff --git a/include/kexec-pe-zboot.h b/include/kexec-pe-zboot.h
new file mode 100644
index 0000000..6381485
--- /dev/null
+++ b/include/kexec-pe-zboot.h
@@ -0,0 +1,15 @@
+#ifndef __KEXEC_PE_ZBOOT_H__
+#define __KEXEC_PE_ZBOOT_H__
+
+/* see drivers/firmware/efi/libstub/zboot-header.S */
+struct linux_pe_zboot_header {
+ uint32_t mz_magic;
+ uint32_t image_type;
+ uint32_t payload_offset;
+ uint32_t payload_size;
+ uint32_t reserved[2];
+ uint32_t compress_type;
+};
+
+int pez_prepare(const char *crude_buf, off_t kernel_size, struct kexec_info *info);
+#endif
diff --git a/kexec/Makefile b/kexec/Makefile
index 8a52e8d..11682bf 100644
--- a/kexec/Makefile
+++ b/kexec/Makefile
@@ -17,6 +17,7 @@ KEXEC_SRCS_base += kexec/kexec-elf-exec.c
KEXEC_SRCS_base += kexec/kexec-elf-core.c
KEXEC_SRCS_base += kexec/kexec-elf-rel.c
KEXEC_SRCS_base += kexec/kexec-elf-boot.c
+KEXEC_SRCS_base += kexec/kexec-pe-zboot.c
KEXEC_SRCS_base += kexec/kexec-iomem.c
KEXEC_SRCS_base += kexec/firmware_memmap.c
KEXEC_SRCS_base += kexec/crashdump.c
diff --git a/kexec/kexec-pe-zboot.c b/kexec/kexec-pe-zboot.c
new file mode 100644
index 0000000..24330a1
--- /dev/null
+++ b/kexec/kexec-pe-zboot.c
@@ -0,0 +1,134 @@
+/*
+ * Generic PE compressed Image (vmlinuz, ZBOOT) support.
+ *
+ * Several distros use 'make zinstall' with CONFIG_ZBOOT
+ * enabled to create UEFI PE images that contain
+ * a decompressor and a compressed kernel image.
+ *
+ * Currently we cannot use kexec_file_load() to load vmlinuz
+ * PE images that self decompress.
+ *
+ * To support ZBOOT, we should:
+ * a). Copy the compressed contents of vmlinuz to a temporary file.
+ * b). Decompress (gunzip-decompress) the contents inside the
+ * temporary file.
+ * c). Validate the resulting image and write it back to the
+ * temporary file.
+ * d). Pass the 'fd' of the temporary file to the kernel space.
+ *
+ * This module contains the arch independent code for the above,
+ * arch specific PE and image checks should wrap calls
+ * to functions in this module.
+ */
+
+#define _GNU_SOURCE
+#include <stdlib.h>
+#include <stdint.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include "kexec.h"
+#include <kexec-pe-zboot.h>
+
+#define FILENAME_IMAGE "/tmp/ImageXXXXXX"
+
+/*
+ * Returns -1 : in case of error/invalid format (not a valid PE+compressed ZBOOT format.
+ *
+ * crude_buf: the content, which is read from the kernel file without any processing
+ */
+int pez_prepare(const char *crude_buf, off_t kernel_size, struct kexec_info *info)
+{
+ int ret = -1;
+ int fd = 0;
+ int kernel_fd = 0;
+ char *fname = NULL;
+ char *kernel_uncompressed_buf = NULL;
+ off_t decompressed_size = 0;
+ const struct linux_pe_zboot_header *z;
+
+ z = (const struct linux_pe_zboot_header *)(crude_buf);
+
+ if (memcmp(&z->image_type, "zimg", sizeof(z->image_type))) {
+ dbgprintf("%s: PE doesn't contain a compressed kernel.\n", __func__);
+ return -1;
+ }
+
+ /*
+ * At the moment its possible to create images with more compression
+ * algorithms than are supported here, error out if we detect that.
+ */
+ if (memcmp(&z->compress_type, "gzip", 4) &&
+ memcmp(&z->compress_type, "lzma", 4)) {
+ dbgprintf("%s: kexec can only decompress gziped and lzma images.\n", __func__);
+ return -1;
+ }
+
+ if (kernel_size < z->payload_offset + z->payload_size) {
+ dbgprintf("%s: PE too small to contain complete payload.\n", __func__);
+ return -1;
+ }
+
+ if (!(fname = strdup(FILENAME_IMAGE))) {
+ dbgprintf("%s: Can't duplicate strings\n", __func__);
+ return -1;
+ }
+
+ if ((fd = mkstemp(fname)) < 0) {
+ dbgprintf("%s: Can't open file %s\n", __func__, fname);
+ ret = -1;
+ goto fail_mkstemp;
+ }
+
+ if (write(fd, &crude_buf[z->payload_offset],
+ z->payload_size) != z->payload_size) {
+ dbgprintf("%s: Can't write the compressed file %s\n",
+ __func__, fname);
+ ret = -1;
+ goto fail_write;
+ }
+
+ kernel_uncompressed_buf = slurp_decompress_file(fname,
+ &decompressed_size);
+
+ dbgprintf("%s: decompressed size %ld\n", __func__, decompressed_size);
+
+ lseek(fd, 0, SEEK_SET);
+
+ if (write(fd, kernel_uncompressed_buf,
+ decompressed_size) != decompressed_size) {
+ dbgprintf("%s: Can't write the decompressed file %s\n",
+ __func__, fname);
+ ret = -1;
+ goto fail_bad_header;
+ }
+
+ kernel_fd = open(fname, O_RDONLY);
+ if (kernel_fd == -1) {
+ dbgprintf("%s: Failed to open file %s\n",
+ __func__, fname);
+ ret = -1;
+ goto fail_bad_header;
+ }
+
+ dbgprintf("%s: ", __func__);
+
+ info->kernel_fd = kernel_fd;
+ info->kernel_buf = kernel_uncompressed_buf;
+ ret = 0;
+ goto fail_write;
+
+fail_bad_header:
+ free(kernel_uncompressed_buf);
+
+fail_write:
+ if (fd >= 0)
+ close(fd);
+
+ unlink(fname);
+
+fail_mkstemp:
+ free(fname);
+
+ return ret;
+}
--
2.31.1
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
