Re: [PATCH v18 5/7] kexec: exclude hot remove cpu from elfcorehdr notes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 01/03/23 03:20, Eric DeVolder wrote:


On 2/27/23 00:11, Sourabh Jain wrote:

On 25/02/23 01:46, Eric DeVolder wrote:


On 2/24/23 02:34, Sourabh Jain wrote:

On 24/02/23 02:04, Eric DeVolder wrote:


On 2/10/23 00:29, Sourabh Jain wrote:

On 10/02/23 01:09, Eric DeVolder wrote:


On 2/9/23 12:43, Sourabh Jain wrote:
Hello Eric,

On 09/02/23 23:01, Eric DeVolder wrote:


On 2/8/23 07:44, Thomas Gleixner wrote:
Eric!

On Tue, Feb 07 2023 at 11:23, Eric DeVolder wrote:
On 2/1/23 05:33, Thomas Gleixner wrote:

So my latest solution is introduce two new CPUHP states, CPUHP_AP_ELFCOREHDR_ONLINE for onlining and CPUHP_BP_ELFCOREHDR_OFFLINE for offlining. I'm open to better names.

The CPUHP_AP_ELFCOREHDR_ONLINE needs to be placed after CPUHP_BRINGUP_CPU. My attempts at locating this state failed when inside the STARTING section, so I located this just inside the ONLINE sectoin. The crash hotplug handler is registered on
this state as the callback for the .startup method.

The CPUHP_BP_ELFCOREHDR_OFFLINE needs to be placed before CPUHP_TEARDOWN_CPU, and I placed it at the end of the PREPARE section. This crash hotplug handler is also registered on this state as the callback for the .teardown method.

TBH, that's still overengineered. Something like this:

bool cpu_is_alive(unsigned int cpu)
{
    struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);

    return data_race(st->state) <= CPUHP_AP_IDLE_DEAD;
}

and use this to query the actual state at crash time. That spares all
those callback heuristics.

I'm making my way though percpu crash_notes, elfcorehdr, vmcoreinfo, makedumpfile and (the consumer of it all) the userspace crash utility, in order to understand the impact of moving from for_each_present_cpu()
to for_each_online_cpu().

Is the packing actually worth the trouble? What's the actual win?

Thanks,

         tglx



Thomas,
I've investigated the passing of crash notes through the vmcore. What I've learned is that:

- linux/fs/proc/vmcore.c (which makedumpfile references to do its job) does   not care what the contents of cpu PT_NOTES are, but it does coalesce them together.

- makedumpfile will count the number of cpu PT_NOTES in order to determine its   nr_cpus variable, which is reported in a header, but otherwise unused (except
  for sadump method).

- the crash utility, for the purposes of determining the cpus, does not appear to   reference the elfcorehdr PT_NOTEs. Instead it locates the various   cpu_[possible|present|online]_mask and computes nr_cpus from that, and also of   course which are online. In addition, when crash does reference the cpu PT_NOTE,   to get its prstatus, it does so by using a percpu technique directly in the vmcore   image memory, not via the ELF structure. Said differently, it appears to me that   crash utility doesn't rely on the ELF PT_NOTEs for cpus; rather it obtains them
  via kernel cpumasks and the memory within the vmcore.

With this understanding, I did some testing. Perhaps the most telling test was that I changed the number of cpu PT_NOTEs emitted in the crash_prepare_elf64_headers() to just 1, hot plugged some cpus, then also took a few offline sparsely via chcpu, then generated a vmcore. The crash utility had no problem loading the vmcore, it reported the proper number of cpus and the number offline (despite only one cpu PT_NOTE), and changing to a different
cpu via 'set -c 30' and the backtrace was completely valid.

My take away is that crash utility does not rely upon ELF cpu PT_NOTEs, it obtains the cpu information directly from kernel data structures. Perhaps at one time crash relied upon the ELF information, but no more. (Perhaps there are other crash dump analyzers
that might rely on the ELF info?)

So, all this to say that I see no need to change crash_prepare_elf64_headers(). There is no compelling reason to move away from for_each_present_cpu(), or modify the list for
online/offline.

Which then leaves the topic of the cpuhp state on which to register. Perhaps reverting back to the use of CPUHP_BP_PREPARE_DYN is the right answer. There does not appear to be a compelling need to accurately track whether the cpu went online/offline for the purposes of creating the elfcorehdr, as ultimately the crash utility pulls that from
kernel data structures, not the elfcorehdr.

I think this is what Sourabh has known and has been advocating for an optimization path that allows not regenerating the elfcorehdr on cpu changes (because all the percpu structs are all laid out). I do think it best to leave that as an arch choice.

Since things are clear on how the PT_NOTES are consumed in kdump kernel [fs/proc/vmcore.c],
makedumpfile, and crash tool I need your opinion on this:

Do we really need to regenerate elfcorehdr for CPU hotplug events?
If yes, can you please list the elfcorehdr components that changes due to CPU hotplug.
Due to the use of for_each_present_cpu(), it is possible for the number of cpu PT_NOTEs to fluctuate as cpus are un/plugged. Onlining/offlining of cpus does not impact the
number of cpu PT_NOTEs (as the cpus are still present).


 From what I understood, crash notes are prepared for possible CPUs as system boots and could be used to create a PT_NOTE section for each possible CPU while generating the elfcorehdr
during the kdump kernel load.

Now once the elfcorehdr is loaded with PT_NOTEs for every possible CPU there is no need to
regenerate it for CPU hotplug events. Or do we?

For onlining/offlining of cpus, there is no need to regenerate the elfcorehdr. However, for actual hot un/plug of cpus, the answer is yes due to for_each_present_cpu(). The caveat here of course is that if crash utility is the only coredump analyzer of concern, then it doesn't care about these cpu PT_NOTEs and there would be no need to re-generate them.

Also, I'm not sure if ARM cpu hotplug, which is just now coming into mainstream, impacts
any of this.

Perhaps the one item that might help here is to distinguish between actual hot un/plug of cpus, versus onlining/offlining. At the moment, I can not distinguish between a hot plug event and an online event (and unplug/offline). If those were distinguishable, then we
could only regenerate on un/plug events.

Or perhaps moving to for_each_possible_cpu() is the better choice?

Yes, because once elfcorehdr is built with possible CPUs we don't have to worry about
hot[un]plug case.

Here is my view on how things should be handled if a core-dump analyzer is dependent on
elfcorehdr PT_NOTEs to find online/offline CPUs.

A PT_NOTE in elfcorehdr holds the address of the corresponding crash notes (kernel has one crash note per CPU for every possible CPU). Though the crash notes are allocated during the boot time they are populated when the system is on the crash path.

This is how crash notes are populated on PowerPC and I am expecting it would be something
similar on other architectures too.

The crashing CPU sends IPI to every other online CPU with a callback function that updates the crash notes of that specific CPU. Once the IPI completes the crashing CPU updates its own crash
note and proceeds further.

The crash notes of CPUs remain uninitialized if the CPUs were offline or hot unplugged at the time system crash. The core-dump analyzer should be able to identify [un]/initialized crash notes
and display the information accordingly.

Thoughts?

- Sourabh

I've been examining what it would mean to move to for_each_possible_cpu() in crash_prepare_elf64_headers(). I think it means:

- Changing for_each_present_cpu() to for_each_possible_cpu() in crash_prepare_elf64_headers(). - For kexec_load() syscall path, rewrite the incoming/supplied elfcorehdr immediately on the load with the elfcorehdr generated by crash_prepare_elf64_headers(). - Eliminate/remove the cpuhp machinery for handling crash hotplug events.

If for_each_present_cpu is replaced with for_each_possible_cpu I still need cpuhp machinery
to update FDT kexec segment for CPU hot add case.

Ah, ok, that's important! So the cpuhp callbacks are still needed.



This would then setup PT_NOTEs for all possible cpus, which should in theory accommodate crash analyzers that rely on ELF PT_NOTEs for crash_notes.

If staying with for_each_present_cpu() is ultimately decided, then I think leaving the cpuhp machinery in place and each arch could decide how to handle crash cpu hotplug events. The overhead for doing this is very minimal, and the events are likely very infrequent.

I agree. Some architectures may need cpuhp machinery to update kexec segment[s] other then elfcorehdr. For example FDT on PowerPC.

- Sourabh Jain

OK, I was thinking that the desire was to eliminate the cpuhp callbacks. In reality, the desire is to change to for_each_possible_cpu(). Given that the kernel creates crash_notes for all possible cpus upon kernel boot, there seems to be no reason to not do this?

HOWEVER...

It's not clear to me that this particular change needs to be part of this series. It's inclusion would facilitate PPC support, but doesn't "solve" anything in general. In fact it causes kexec_load and kexec_file_load to deviate (kexec_load via userspace kexec does the equivalent of for_each_present_cpu() where as with this change kexec_file_load would do for_each_possible_cpu(); until a hot plug event then both would do for_each_possible_cpu()). And if this change were to arrive as part of Sourabh's PPC support, then it does not appear to impact x86 (not sure about other arches). And the 'crash' dump analyzer doesn't care either way.

Including this change would enable an optimization path (for x86 at least) that short-circuits cpu hotplug changes in the arch crash handler, for example:

diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index aca3f1817674..0883f6b11de4 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -473,6 +473,11 @@ void arch_crash_handle_hotplug_event(struct kimage *image)
    unsigned long mem, memsz;
    unsigned long elfsz = 0;

+   if (image->file_mode && (
+       image->hp_action == KEXEC_CRASH_HP_ADD_CPU ||
+       image->hp_action == KEXEC_CRASH_HP_REMOVE_CPU))
+       return;
+
    /*
     * Create the new elfcorehdr reflecting the changes to CPU and/or
     * memory resources.

I'm not sure that is compelling given the infrequent nature of cpu hotplug events.
It certainly closes/reduces the window where kdump is not active due kexec segment update.|

Fair enough. I plan to include this change in v19.



In my mind I still have a question about kexec_load() path. The userspace kexec can not do the equivalent of for_each_possible_cpu(). It can obtain max possible cpus from /sys/devices/system/cpu/possible, but for those cpus not present the /sys/devices/system/cpu/cpuXX is not available and so the crash_notes entries is not available. My attempts to expose all cpuXX lead to odd behavior that was requiring changes in ACPI and arch code that looked untenable.

There seem to be these options available for kexec_load() path:
- immediately rewrite the elfcorehdr upon load via a call to crash_prepare_elf64_headers(). I've made this work with the following, as proof of concept:
Yes regenerating/patching the elfcorehdr could be an option for kexec_load syscall.
So this is not needed by x86, but more so by ppc. Should this change be in the ppc set or this set?
Since /sys/devices/system/cpu/cpuXX represents possible CPUs on PowerPC, there is no need for elfcorehdr regeneration on PowerPC for kexec_load case
for CPU hotplug events.

My ask is, keep the cpuhp machinery so that architectures can update other kexec segments if needed of CPU add/remove case.

In case x86 has nothing to update on CPU hotplug events and you want remove the CPU hp machinery I can add the same
in ppc patch series.

Thanks,
Sourabh Jain

_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux