Hi, On Sat, 5 Nov 2022 at 22:16, <ns@xxxxxxxx> wrote: > > On 2022-11-05 05:49, Dave Young wrote: > > Baoquan, thanks for cc me. > > > > On Sat, 5 Nov 2022 at 11:10, Baoquan He <bhe@xxxxxxxxxx> wrote: > >> > >> Add Dave to CC > >> > >> On 10/28/22 at 01:02pm, ns@xxxxxxxx wrote: > >> > Greetings, > >> > > >> > I've been hitting a bug on my Lenovo ThinkPad T480 where kexecing will > >> > cause EFI mode (if that's the right term for it) to be unconditionally > >> > disabled, even when not using the --noefi option to kexec. > >> > > >> > What I mean by "EFI mode" being disabled, more than just EFI runtime > >> > services, is that basically nothing about the system's EFI is visible > >> > post-kexec. Normally you have a message like this in dmesg when the > >> > system is booted in EFI mode: > >> > > >> > [ 0.000000] efi: EFI v2.70 by EDK II > >> > [ 0.000000] efi: SMBIOS=0x7f98a000 ACPI=0x7fb7e000 ACPI 2.0=0x7fb7e014 > >> > MEMATTR=0x7ec63018 > >> > (obviously not the real firmware of the machine I'm talking about, but I > >> > can also send that if it would be of any help) > >> > > >> > No such message pops up in my dmesg as a result of this bug, & this > >> > causes some fallout like being unable to find the system's DMI > >> > information: > >> > > >> > <6>[ 0.000000] DMI not present or invalid. > >> > > >> > The efivarfs module also fails to load with -ENODEV. > >> > > >> > I've tried also booting with efi=runtime explicitly but it doesn't > >> > change anything. The kernel still does not print the name of the EFI > >> > firmware, DMI is still missing, & efivarfs still fails to load. > >> > > >> > I've been using the kexec_load syscall for all these tests, if it's > >> > important. > >> > > >> > Also, to make it very clear, all this only ever happens post-kexec. When > >> > booting straight from UEFI (with the EFI stub), all the aforementioned > >> > stuff that fails works perfectly fine (i.e. name of firmware is printed, > >> > DMI is properly found, & efivarfs loads & mounts just fine). > >> > > >> > This is reproducible with a vanilla 6.1-rc2 kernel. I've been trying to > >> > bisect it, but it seems like it goes pretty far back. I've got vanilla > >> > mainline kernel builds dating back to 5.17 that have the exact same > >> > issue. It might be worth noting that during this testing, I made sure > >> > the version of the kernel being kexeced & the kernel kexecing were the > >> > same version. It may not have been a problem in older kernels, but that > >> > would be difficult to test for me (a pretty important driver for this > >> > machine was only merged during v5.17-rc4). So it may not have been a > >> > regression & just a hidden problem since time immemorial. > >> > > >> > I am willing to test any patches I may get to further debug or fix > >> > this issue, preferably based on the current state of torvalds/linux.git. > >> > I can build & test kernels quite a few times per day. > >> > > >> > I can also send any important materials (kernel config, dmesg, firmware > >> > information, so on & so forth) on request. I'll also just mention I'm > >> > using kexec-tools 2.0.24 upfront, if it matters. > > > > Can you check the efi runtime in sysfs: > > ls /sys/firmware/efi/runtime-map/ > > > > If nothing then maybe you did not enable CONFIG_EFI_RUNTIME_MAP=y, it > > is needed for kexec UEFI boot on x86_64. > > Oh my, it really is that simple. > > Indeed, enabling this in the pre-kexec kernel fixes it all up. I had > blindly disabled it in my quest to downsize the pre-kexec kernel to > reduce boot time (it only runs a bootloader). In hindsight, the firmware > drivers section is not really a good section to tweak on a whim. > > I'm terribly sorry to have taken your time to "fix" this "bug". But I > must ask, is there any reason why this is a visible config option, or at > least not gated behind CONFIG_EXPERT? drivers/firmware/efi/runtime-map.c > is pretty tiny, & considering it depends on CONFIG_KEXEC_CORE, one > probably wants to have kexec work properly if they can even enable it. Glad to know it works with the .config tweaking. I can not recall any reason for that though. Since it sits in the efi code path, let's see how Ard thinks about your proposal. Thanks Dave _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
