RE: [PATCH 24/30] panic: Refactor the panic path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx> Sent: Wednesday, April 27, 2022 3:49 PM
> 
> The panic() function is somewhat convoluted - a lot of changes were
> made over the years, adding comments that might be misleading/outdated
> now, it has a code structure that is a bit complex to follow, with
> lots of conditionals, for example. The panic notifier list is something
> else - a single list, with multiple callbacks of different purposes,
> that run in a non-deterministic order and may affect hardly kdump
> reliability - see the "crash_kexec_post_notifiers" workaround-ish flag.
> 
> This patch proposes a major refactor on the panic path based on Petr's
> idea [0] - basically we split the notifiers list in three, having a set
> of different call points in the panic path. Below a list of changes
> proposed in this patch, culminating in the panic notifiers level
> concept:
> 
> (a) First of all, we improved comments all over the function
> and removed useless variables / includes. Also, as part of this
> clean-up we concentrate the console flushing functions in a helper.
> 
> (b) As mentioned before, there is a split of the panic notifier list
> in three, based on the purpose of the callback. The code contains
> good documentation in form of comments, but a summary of the three
> lists follows:
> 
> - the hypervisor list aims low-risk procedures to inform hypervisors
> or firmware about the panic event, also includes LED-related functions;
> 
> - the informational list contains callbacks that provide more details,
> like kernel offset or trace dump (if enabled) and also includes the
> callbacks aimed at reducing log pollution or warns, like the RCU and
> hung task disable callbacks;
> 
> - finally, the pre_reboot list is the old notifier list renamed,
> containing the more risky callbacks that didn't fit the previous
> lists. There is also a 4th list (the post_reboot one), but it's not
> related with the original list - it contains late time architecture
> callbacks aimed at stopping the machine, for example.
> 
> The 3 notifiers lists execute in different moments, hypervisor being
> the first, followed by informational and finally the pre_reboot list.
> 
> (c) But then, there is the ordering problem of the notifiers against
> the crash_kernel() call - kdump must be as reliable as possible.
> For that, a simple binary "switch" as "crash_kexec_post_notifiers"
> is not enough, hence we introduce here concept of panic notifier
> levels: there are 5 levels, from 0 (no notifier executes before
> kdump) until 4 (all notifiers run before kdump); the default level
> is 2, in which the hypervisor and (iff we have any kmsg dumper)
> the informational notifiers execute before kdump.
> 
> The detailed documentation of the levels is present in code comments
> and in the kernel-parameters.txt file; as an analogy with the previous
> panic() implementation, the level 0 is exactly the same as the old
> behavior of notifiers, running all after kdump, and the level 4 is
> the same as "crash_kexec_post_notifiers=Y" (we kept this parameter as
> a deprecated one).
> 
> (d) Finally, an important change made here: we now use only the
> function "crash_smp_send_stop()" to shut all the secondary CPUs
> in the panic path. Before, there was a case of using the regular
> "smp_send_stop()", but the better approach is to simplify the
> code and try to use the function which was created exclusively
> for the panic path. Experiments showed that it works fine, and
> code was very simplified with that.
> 
> Functional change is expected from this refactor, since now we
> call some notifiers by default before kdump, but the goal here
> besides code clean-up is to have a better panic path, more
> reliable and deterministic, but also very customizable.
> 
> [0] https://lore.kernel.org/lkml/YfPxvzSzDLjO5ldp@alley/
> 
> Suggested-by: Petr Mladek <pmladek@xxxxxxxx>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxx>
> ---
> 
> Special thanks to Petr and Baoquan for the suggestion and feedback in a previous
> email thread. There's some important design decisions that worth mentioning and
> discussing:
> 
> * The default panic notifiers level is 2, based on Petr Mladek's suggestion,
> which makes a lot of sense. Of course, this is customizable through the
> parameter, but would be something worthwhile to have a KConfig option to set
> the default level? It would help distros that want the old behavior
> (no notifiers before kdump) as default.
> 
> * The implementation choice was to _avoid_ intricate if conditionals in the
> panic path, which would _definitely_ be present with the panic notifiers levels
> idea; so, instead of lots of if conditionals, the set/clear bits approach with
> functions called in 2 points (but executing only in one of them) is much easier
> to follow an was used here; the ordering helper function and the comments also
> help a lot to avoid confusion (hopefully).
> 
> * Choice was to *always* use crash_smp_send_stop() instead of sometimes making
> use of the regular smp_send_stop(); for most architectures they are the same,
> including Xen (on x86). For the ones that override it, all should work fine,
> in the powerpc case it's even more correct (see the subsequent patch
> "powerpc: Do not force all panic notifiers to execute before kdump")
> 
> There seems to be 2 cases that requires some plumbing to work 100% right:
> - ARM doesn't disable local interrupts / FIQs in the crash version of
> send_stop(); we patched that early in this series;
> - x86 could face an issue if we have VMX and do use crash_smp_send_stop()
> _without_ kdump, but this is fixed in the first patch of the series (and
> it's a bug present even before this refactor).
> 
> * Notice we didn't add a sysrq for panic notifiers level - should have it?
> Alejandro proposed recently to add a sysrq for "crash_kexec_post_notifiers",
> let me know if you feel the need here Alejandro, since the core parameters are
> present in /sys, I didn't consider much gain in having a sysrq, but of course
> I'm open to suggestions!
> 
> Thanks advance for the review!
> 
>  .../admin-guide/kernel-parameters.txt         |  42 ++-
>  include/linux/panic_notifier.h                |   1 +
>  kernel/kexec_core.c                           |   8 +-
>  kernel/panic.c                                | 292 +++++++++++++-----
>  .../selftests/pstore/pstore_crash_test        |   5 +-
>  5 files changed, 252 insertions(+), 96 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt
> b/Documentation/admin-guide/kernel-parameters.txt
> index 3f1cc5e317ed..8d3524060ce3 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -829,6 +829,13 @@
>  			It will be ignored when crashkernel=X,high is not used
>  			or memory reserved is below 4G.
> 
> +	crash_kexec_post_notifiers
> +			This was DEPRECATED - users should always prefer the
> +			parameter "panic_notifiers_level" - check its entry
> +			in this documentation for details on how it works.
> +			Setting this parameter is exactly the same as setting
> +			"panic_notifiers_level=4".
> +
>  	cryptomgr.notests
>  			[KNL] Disable crypto self-tests
> 
> @@ -3784,6 +3791,33 @@
>  			timeout < 0: reboot immediately
>  			Format: <timeout>
> 
> +	panic_notifiers_level=
> +			[KNL] Set the panic notifiers execution order.
> +			Format: <unsigned int>
> +			We currently have 4 lists of panic notifiers; based
> +			on the functionality and risk (for panic success) the
> +			callbacks are added in a given list. The lists are:
> +			- hypervisor/FW notification list (low risk);
> +			- informational list (low/medium risk);
> +			- pre_reboot list (higher risk);
> +			- post_reboot list (only run late in panic and after
> +			kdump, not configurable for now).
> +			This parameter defines the ordering of the first 3
> +			lists with regards to kdump; the levels determine
> +			which set of notifiers execute before kdump. The
> +			accepted levels are:
> +			0: kdump is the first thing to run, NO list is
> +			executed before kdump.
> +			1: only the hypervisor list is executed before kdump.
> +			2 (default level): the hypervisor list and (*if*
> +			there's any kmsg_dumper defined) the informational
> +			list are executed before kdump.
> +			3: both the hypervisor and the informational lists
> +			(always) execute before kdump.

I'm not clear on why level 2 exists.  What is the scenario where
execution of the info list before kdump should be conditional on the
existence of a kmsg_dumper?   Maybe the scenario is described
somewhere in the patch set and I just missed it.

> +			4: the 3 lists (hypervisor, info and pre_reboot)
> +			execute before kdump - this behavior is analog to the
> +			deprecated parameter "crash_kexec_post_notifiers".
> +
>  	panic_print=	Bitmask for printing system info when panic happens.
>  			User can chose combination of the following bits:
>  			bit 0: print all tasks info
> @@ -3814,14 +3848,6 @@
>  	panic_on_warn	panic() instead of WARN().  Useful to cause kdump
>  			on a WARN().
> 
> -	crash_kexec_post_notifiers
> -			Run kdump after running panic-notifiers and dumping
> -			kmsg. This only for the users who doubt kdump always
> -			succeeds in any situation.
> -			Note that this also increases risks of kdump failure,
> -			because some panic notifiers can make the crashed
> -			kernel more unstable.
> -
>  	parkbd.port=	[HW] Parallel port number the keyboard adapter is
>  			connected to, default is 0.
>  			Format: <parport#>
> diff --git a/include/linux/panic_notifier.h b/include/linux/panic_notifier.h
> index bcf6a5ea9d7f..b5041132321d 100644
> --- a/include/linux/panic_notifier.h
> +++ b/include/linux/panic_notifier.h
> @@ -10,6 +10,7 @@ extern struct atomic_notifier_head panic_info_list;
>  extern struct atomic_notifier_head panic_pre_reboot_list;
>  extern struct atomic_notifier_head panic_post_reboot_list;
> 
> +bool panic_notifiers_before_kdump(void);
>  extern bool crash_kexec_post_notifiers;
> 
>  enum panic_notifier_val {
> diff --git a/kernel/kexec_core.c b/kernel/kexec_core.c
> index 68480f731192..f8906db8ca72 100644
> --- a/kernel/kexec_core.c
> +++ b/kernel/kexec_core.c
> @@ -74,11 +74,11 @@ struct resource crashk_low_res = {
>  int kexec_should_crash(struct task_struct *p)
>  {
>  	/*
> -	 * If crash_kexec_post_notifiers is enabled, don't run
> -	 * crash_kexec() here yet, which must be run after panic
> -	 * notifiers in panic().
> +	 * In case any panic notifiers are set to execute before kexec,
> +	 * don't run crash_kexec() here yet, which must run after these
> +	 * panic notifiers are executed, in the panic() path.
>  	 */
> -	if (crash_kexec_post_notifiers)
> +	if (panic_notifiers_before_kdump())
>  		return 0;
>  	/*
>  	 * There are 4 panic() calls in make_task_dead() path, each of which
> diff --git a/kernel/panic.c b/kernel/panic.c
> index bf792102b43e..b7c055d4f87f 100644
> --- a/kernel/panic.c
> +++ b/kernel/panic.c
> @@ -15,7 +15,6 @@
>  #include <linux/kgdb.h>
>  #include <linux/kmsg_dump.h>
>  #include <linux/kallsyms.h>
> -#include <linux/notifier.h>
>  #include <linux/vt_kern.h>
>  #include <linux/module.h>
>  #include <linux/random.h>
> @@ -52,14 +51,23 @@ static unsigned long tainted_mask =
>  static int pause_on_oops;
>  static int pause_on_oops_flag;
>  static DEFINE_SPINLOCK(pause_on_oops_lock);
> -bool crash_kexec_post_notifiers;
> +
>  int panic_on_warn __read_mostly;
> +bool panic_on_taint_nousertaint;
>  unsigned long panic_on_taint;
> -bool panic_on_taint_nousertaint = false;
> 
>  int panic_timeout = CONFIG_PANIC_TIMEOUT;
>  EXPORT_SYMBOL_GPL(panic_timeout);
> 
> +/* Initialized with all notifiers set to run before kdump */
> +static unsigned long panic_notifiers_bits = 15;
> +
> +/* Default level is 2, see kernel-parameters.txt */
> +unsigned int panic_notifiers_level = 2;
> +
> +/* DEPRECATED in favor of panic_notifiers_level */
> +bool crash_kexec_post_notifiers;
> +
>  #define PANIC_PRINT_TASK_INFO		0x00000001
>  #define PANIC_PRINT_MEM_INFO		0x00000002
>  #define PANIC_PRINT_TIMER_INFO		0x00000004
> @@ -109,10 +117,14 @@ void __weak nmi_panic_self_stop(struct pt_regs *regs)
>  }
> 
>  /*
> - * Stop other CPUs in panic.  Architecture dependent code may override this
> - * with more suitable version.  For example, if the architecture supports
> - * crash dump, it should save registers of each stopped CPU and disable
> - * per-CPU features such as virtualization extensions.
> + * Stop other CPUs in panic context.
> + *
> + * Architecture dependent code may override this with more suitable version.
> + * For example, if the architecture supports crash dump, it should save the
> + * registers of each stopped CPU and disable per-CPU features such as
> + * virtualization extensions. When not overridden in arch code (and for
> + * x86/xen), this is exactly the same as execute smp_send_stop(), but
> + * guarded against duplicate execution.
>   */
>  void __weak crash_smp_send_stop(void)
>  {
> @@ -183,6 +195,112 @@ static void panic_print_sys_info(bool console_flush)
>  		ftrace_dump(DUMP_ALL);
>  }
> 
> +/*
> + * Helper that accumulates all console flushing routines executed on panic.
> + */
> +static void console_flushing(void)
> +{
> +#ifdef CONFIG_VT
> +	unblank_screen();
> +#endif
> +	console_unblank();
> +
> +	/*
> +	 * In this point, we may have disabled other CPUs, hence stopping the
> +	 * CPU holding the lock while still having some valuable data in the
> +	 * console buffer.
> +	 *
> +	 * Try to acquire the lock then release it regardless of the result.
> +	 * The release will also print the buffers out. Locks debug should
> +	 * be disabled to avoid reporting bad unlock balance when panic()
> +	 * is not being called from OOPS.
> +	 */
> +	debug_locks_off();
> +	console_flush_on_panic(CONSOLE_FLUSH_PENDING);
> +
> +	panic_print_sys_info(true);
> +}
> +
> +#define PN_HYPERVISOR_BIT	0
> +#define PN_INFO_BIT		1
> +#define PN_PRE_REBOOT_BIT	2
> +#define PN_POST_REBOOT_BIT	3
> +
> +/*
> + * Determine the order of panic notifiers with regards to kdump.
> + *
> + * This function relies in the "panic_notifiers_level" kernel parameter
> + * to determine how to order the notifiers with regards to kdump. We
> + * have currently 5 levels. For details, please check the kernel docs for
> + * "panic_notifiers_level" at Documentation/admin-guide/kernel-parameters.txt.
> + *
> + * Default level is 2, which means the panic hypervisor and informational
> + * (unless we don't have any kmsg_dumper) lists will execute before kdump.
> + */
> +static void order_panic_notifiers_and_kdump(void)
> +{
> +	/*
> +	 * The parameter "crash_kexec_post_notifiers" is deprecated, but
> +	 * valid. Users that set it want really all panic notifiers to
> +	 * execute before kdump, so it's effectively the same as setting
> +	 * the panic notifiers level to 4.
> +	 */
> +	if (panic_notifiers_level >= 4 || crash_kexec_post_notifiers)
> +		return;
> +
> +	/*
> +	 * Based on the level configured (smaller than 4), we clear the
> +	 * proper bits in "panic_notifiers_bits". Notice that this bitfield
> +	 * is initialized with all notifiers set.
> +	 */
> +	switch (panic_notifiers_level) {
> +	case 3:
> +		clear_bit(PN_PRE_REBOOT_BIT, &panic_notifiers_bits);
> +		break;
> +	case 2:
> +		clear_bit(PN_PRE_REBOOT_BIT, &panic_notifiers_bits);
> +
> +		if (!kmsg_has_dumpers())
> +			clear_bit(PN_INFO_BIT, &panic_notifiers_bits);
> +		break;
> +	case 1:
> +		clear_bit(PN_PRE_REBOOT_BIT, &panic_notifiers_bits);
> +		clear_bit(PN_INFO_BIT, &panic_notifiers_bits);
> +		break;
> +	case 0:
> +		clear_bit(PN_PRE_REBOOT_BIT, &panic_notifiers_bits);
> +		clear_bit(PN_INFO_BIT, &panic_notifiers_bits);
> +		clear_bit(PN_HYPERVISOR_BIT, &panic_notifiers_bits);
> +		break;
> +	}

I think the above switch statement could be done as follows:

if (panic_notifiers_level <= 3)
	clear_bit(PN_PRE_REBOOT_BIT, &panic_notifiers_bits);
if (panic_notifiers_level <= 2)
	if (!kmsg_has_dumpers())
		clear_bit(PN_INFO_BIT, &panic_notifiers_bits);
if (panic_notifiers_level <=1)
	clear_bit(PN_INFO_BIT, &panic_notifiers_bits);
if (panic_notifiers_level == 0)
	clear_bit(PN_HYPERVISOR_BIT, &panic_notifiers_bits);

That's about half the lines of code.  It's somewhat a matter of style,
so treat this as just a suggestion to consider.  I just end up looking
for a better solution when I see the same line of code repeated
3 or 4 times!

> +}
> +
> +/*
> + * Set of helpers to execute the panic notifiers only once.
> + * Just the informational notifier cares about the return.
> + */
> +static inline bool notifier_run_once(struct atomic_notifier_head head,
> +				     char *buf, long bit)
> +{
> +	if (test_and_change_bit(bit, &panic_notifiers_bits)) {
> +		atomic_notifier_call_chain(&head, PANIC_NOTIFIER, buf);
> +		return true;
> +	}
> +	return false;
> +}
> +
> +#define panic_notifier_hypervisor_once(buf)\
> +	notifier_run_once(panic_hypervisor_list, buf, PN_HYPERVISOR_BIT)
> +
> +#define panic_notifier_info_once(buf)\
> +	notifier_run_once(panic_info_list, buf, PN_INFO_BIT)
> +
> +#define panic_notifier_pre_reboot_once(buf)\
> +	notifier_run_once(panic_pre_reboot_list, buf, PN_PRE_REBOOT_BIT)
> +
> +#define panic_notifier_post_reboot_once(buf)\
> +	notifier_run_once(panic_post_reboot_list, buf, PN_POST_REBOOT_BIT)
> +
>  /**
>   *	panic - halt the system
>   *	@fmt: The text string to print
> @@ -198,32 +316,29 @@ void panic(const char *fmt, ...)
>  	long i, i_next = 0, len;
>  	int state = 0;
>  	int old_cpu, this_cpu;
> -	bool _crash_kexec_post_notifiers = crash_kexec_post_notifiers;
> 
> -	if (panic_on_warn) {
> -		/*
> -		 * This thread may hit another WARN() in the panic path.
> -		 * Resetting this prevents additional WARN() from panicking the
> -		 * system on this thread.  Other threads are blocked by the
> -		 * panic_mutex in panic().
> -		 */
> -		panic_on_warn = 0;
> -	}
> +	/*
> +	 * This thread may hit another WARN() in the panic path, so
> +	 * resetting this option prevents additional WARN() from
> +	 * re-panicking the system here.
> +	 */
> +	panic_on_warn = 0;
> 
>  	/*
>  	 * Disable local interrupts. This will prevent panic_smp_self_stop
> -	 * from deadlocking the first cpu that invokes the panic, since
> -	 * there is nothing to prevent an interrupt handler (that runs
> -	 * after setting panic_cpu) from invoking panic() again.
> +	 * from deadlocking the first cpu that invokes the panic, since there
> +	 * is nothing to prevent an interrupt handler (that runs after setting
> +	 * panic_cpu) from invoking panic() again. Also disables preemption
> +	 * here - notice it's not safe to rely on interrupt disabling to avoid
> +	 * preemption, since any cond_resched() or cond_resched_lock() might
> +	 * trigger a reschedule if the preempt count is 0 (for reference, see
> +	 * Documentation/locking/preempt-locking.rst). Some functions called
> +	 * from here want preempt disabled, so no point enabling it later.
>  	 */
>  	local_irq_disable();
>  	preempt_disable_notrace();
> 
>  	/*
> -	 * It's possible to come here directly from a panic-assertion and
> -	 * not have preempt disabled. Some functions called from here want
> -	 * preempt to be disabled. No point enabling it later though...
> -	 *
>  	 * Only one CPU is allowed to execute the panic code from here. For
>  	 * multiple parallel invocations of panic, all other CPUs either
>  	 * stop themself or will wait until they are stopped by the 1st CPU
> @@ -266,73 +381,75 @@ void panic(const char *fmt, ...)
>  	kgdb_panic(buf);
> 
>  	/*
> -	 * If we have crashed and we have a crash kernel loaded let it handle
> -	 * everything else.
> -	 * If we want to run this after calling panic_notifiers, pass
> -	 * the "crash_kexec_post_notifiers" option to the kernel.
> +	 * Here lies one of the most subtle parts of the panic path,
> +	 * the panic notifiers and their order with regards to kdump.
> +	 * We currently have 4 sets of notifiers:
>  	 *
> -	 * Bypass the panic_cpu check and call __crash_kexec directly.
> +	 *  - the hypervisor list is composed by callbacks that are related
> +	 *  to warn the FW / hypervisor about panic, or non-invasive LED
> +	 *  controlling functions - (hopefully) low-risk for kdump, should
> +	 *  run early if possible.
> +	 *
> +	 *  - the informational list is composed by functions dumping data
> +	 *  like kernel offsets, device error registers or tracing buffer;
> +	 *  also log flooding prevention callbacks fit in this list. It is
> +	 *  relatively safe to run before kdump.
> +	 *
> +	 *  - the pre_reboot list basically is everything else, all the
> +	 *  callbacks that don't fit in the 2 previous lists. It should
> +	 *  run *after* kdump if possible, as it contains high-risk
> +	 *  functions that may break kdump.
> +	 *
> +	 *  - we also have a 4th list of notifiers, the post_reboot
> +	 *  callbacks. This is not strongly related to kdump since it's
> +	 *  always executed late in the panic path, after the restart
> +	 *  mechanism (if set); its goal is to provide a way for
> +	 *  architecture code effectively power-off/disable the system.
> +	 *
> +	 *  The kernel provides the "panic_notifiers_level" parameter
> +	 *  to adjust the ordering in which these notifiers should run
> +	 *  with regards to kdump - the default level is 2, so both the
> +	 *  hypervisor and informational notifiers should execute before
> +	 *  the __crash_kexec(); the info notifier won't run by default
> +	 *  unless there's some kmsg_dumper() registered. For details
> +	 *  about it, check Documentation/admin-guide/kernel-parameters.txt.
> +	 *
> +	 *  Notice that the code relies in bits set/clear operations to
> +	 *  determine the ordering, functions *_once() execute only one
> +	 *  time, as their name implies. The goal is to prevent too much
> +	 *  if conditionals and more confusion. Finally, regarding CPUs
> +	 *  disabling: unless NO panic notifier executes before kdump,
> +	 *  we always disable secondary CPUs before __crash_kexec() and
> +	 *  the notifiers execute.
>  	 */
> -	if (!_crash_kexec_post_notifiers) {
> +	order_panic_notifiers_and_kdump();
> +
> +	/* If no level, we should kdump ASAP. */
> +	if (!panic_notifiers_level)
>  		__crash_kexec(NULL);
> 
> -		/*
> -		 * Note smp_send_stop is the usual smp shutdown function, which
> -		 * unfortunately means it may not be hardened to work in a
> -		 * panic situation.
> -		 */
> -		smp_send_stop();
> -	} else {
> -		/*
> -		 * If we want to do crash dump after notifier calls and
> -		 * kmsg_dump, we will need architecture dependent extra
> -		 * works in addition to stopping other CPUs.
> -		 */
> -		crash_smp_send_stop();
> -	}
> +	crash_smp_send_stop();
> +	panic_notifier_hypervisor_once(buf);
> 
> -	/*
> -	 * Run any panic handlers, including those that might need to
> -	 * add information to the kmsg dump output.
> -	 */
> -	atomic_notifier_call_chain(&panic_hypervisor_list, PANIC_NOTIFIER, buf);
> -	atomic_notifier_call_chain(&panic_info_list, PANIC_NOTIFIER, buf);
> -	atomic_notifier_call_chain(&panic_pre_reboot_list, PANIC_NOTIFIER, buf);
> +	if (panic_notifier_info_once(buf)) {
> +		panic_print_sys_info(false);
> +		kmsg_dump(KMSG_DUMP_PANIC);
> +	}
> 
> -	panic_print_sys_info(false);
> +	panic_notifier_pre_reboot_once(buf);
> 
> -	kmsg_dump(KMSG_DUMP_PANIC);
> +	__crash_kexec(NULL);
> 
> -	/*
> -	 * If you doubt kdump always works fine in any situation,
> -	 * "crash_kexec_post_notifiers" offers you a chance to run
> -	 * panic_notifiers and dumping kmsg before kdump.
> -	 * Note: since some panic_notifiers can make crashed kernel
> -	 * more unstable, it can increase risks of the kdump failure too.
> -	 *
> -	 * Bypass the panic_cpu check and call __crash_kexec directly.
> -	 */
> -	if (_crash_kexec_post_notifiers)
> -		__crash_kexec(NULL);
> +	panic_notifier_hypervisor_once(buf);
> 
> -#ifdef CONFIG_VT
> -	unblank_screen();
> -#endif
> -	console_unblank();
> -
> -	/*
> -	 * We may have ended up stopping the CPU holding the lock (in
> -	 * smp_send_stop()) while still having some valuable data in the console
> -	 * buffer.  Try to acquire the lock then release it regardless of the
> -	 * result.  The release will also print the buffers out.  Locks debug
> -	 * should be disabled to avoid reporting bad unlock balance when
> -	 * panic() is not being callled from OOPS.
> -	 */
> -	debug_locks_off();
> -	console_flush_on_panic(CONSOLE_FLUSH_PENDING);
> +	if (panic_notifier_info_once(buf)) {
> +		panic_print_sys_info(false);
> +		kmsg_dump(KMSG_DUMP_PANIC);
> +	}
> 
> -	panic_print_sys_info(true);
> +	panic_notifier_pre_reboot_once(buf);
> 
> +	console_flushing();
>  	if (!panic_blink)
>  		panic_blink = no_blink;
> 
> @@ -363,8 +480,7 @@ void panic(const char *fmt, ...)
>  		emergency_restart();
>  	}
> 
> -	atomic_notifier_call_chain(&panic_post_reboot_list,
> -				   PANIC_NOTIFIER, buf);
> +	panic_notifier_post_reboot_once(buf);
> 
>  	pr_emerg("---[ end Kernel panic - not syncing: %s ]---\n", buf);
> 
> @@ -383,6 +499,15 @@ void panic(const char *fmt, ...)
> 
>  EXPORT_SYMBOL(panic);
> 
> +/*
> + * Helper used in the kexec code, to validate if any
> + * panic notifier is set to execute early, before kdump.
> + */
> +inline bool panic_notifiers_before_kdump(void)
> +{
> +	return panic_notifiers_level || crash_kexec_post_notifiers;
> +}
> +
>  /*
>   * TAINT_FORCED_RMMOD could be a per-module flag but the module
>   * is being removed anyway.
> @@ -692,6 +817,9 @@ core_param(panic, panic_timeout, int, 0644);
>  core_param(panic_print, panic_print, ulong, 0644);
>  core_param(pause_on_oops, pause_on_oops, int, 0644);
>  core_param(panic_on_warn, panic_on_warn, int, 0644);
> +core_param(panic_notifiers_level, panic_notifiers_level, uint, 0644);
> +
> +/* DEPRECATED in favor of panic_notifiers_level */
>  core_param(crash_kexec_post_notifiers, crash_kexec_post_notifiers, bool, 0644);
> 
>  static int __init oops_setup(char *s)
> diff --git a/tools/testing/selftests/pstore/pstore_crash_test
> b/tools/testing/selftests/pstore/pstore_crash_test
> index 2a329bbb4aca..1e60ce4501aa 100755
> --- a/tools/testing/selftests/pstore/pstore_crash_test
> +++ b/tools/testing/selftests/pstore/pstore_crash_test
> @@ -25,6 +25,7 @@ touch $REBOOT_FLAG
>  sync
> 
>  # cause crash
> -# Note: If you use kdump and want to see kmesg-* files after reboot, you should
> -#       specify 'crash_kexec_post_notifiers' in 1st kernel's cmdline.
> +# Note: If you use kdump and want to see kmsg-* files after reboot, you should
> +#       be sure that the parameter "panic_notifiers_level" is more than '2' (the
> +#       default value for this parameter is '2') in the first kernel's cmdline.
>  echo c > /proc/sysrq-trigger
> --
> 2.36.0


_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux