On Sat, Jun 05, 2021 at 03:51:05PM +0800, Dave Young wrote: > Hi, > On 06/02/21 at 11:53am, Andy Shevchenko wrote: > > +Cc: Ard > > > > On Wed, Jun 02, 2021 at 11:42:14AM +0300, Andy Shevchenko wrote: > > > On Fri, Dec 02, 2016 at 09:54:14PM +0200, Andy Shevchenko wrote: > > > > Until now DMI information is lost when kexec'ing. Fix this in the same way as > > > > it has been done for ACPI RSDP. > > > > > > > > Series has been tested on Galileo Gen2 where DMI is used by drivers, in > > > > particular the default I2C host speed is choosen based on DMI system > > > > information and now gets it correct. > > > > > > Still nothing happens for a while and problem still exists. > > > Can we do something about it, please? > > Seems I totally missed this thread. Old emails lost. You can always access to it via lore :-) https://lore.kernel.org/linux-efi/20161217105721.GB6922@xxxxxxxxxxxxxxxxxxxxxxxxxx/T/#u (Okay, it's not full, but contains main parts anyway) > The question Ard asked is to confirm if the firmware converted the > SMBIOS3 addr to a virtual address after exit boot service. I do not > remember some easy way to check it due to lost the context of the code. > But you can try to check it via dmesg|grep SMBIOS both in normal boot > and kexeced boot log. And then compare if those addresses are > identical. > > If the SMBIOS3 addr in kexec kernel is different then it should have > been modified by firmware. Then we need patch kernel and kexec-tools to > support it. > > You can try below patch to see if it works: So, AFAIU I have to apply patch to kexec tools for the fist kernel + userspace and apply kernel patch for the second kernel? Or it's all for the first one? > apply a kexec-tools patch to kexec-tools if you do not use kexec -s > (kexec_file_load): Here is how we are using it: https://github.com/andy-shev/buildroot/blob/intel/board/intel/common/netboot/udhcpc-script.sh#L54 > --- kexec-tools.orig/kexec/arch/i386/x86-linux-setup.c > +++ kexec-tools/kexec/arch/i386/x86-linux-setup.c > @@ -533,7 +533,8 @@ struct efi_setup_data { > uint64_t runtime; > uint64_t tables; > uint64_t smbios; > - uint64_t reserved[8]; > + uint64_t smbios3; > + uint64_t reserved[7]; > }; > > struct setup_data { > @@ -580,6 +581,8 @@ static int get_efi_values(struct efi_set > > ret = get_efi_value("/sys/firmware/efi/systab", "SMBIOS=0x", > &esd->smbios); > + ret |= get_efi_value("/sys/firmware/efi/systab", "SMBIOS3=0x", > + &esd->smbios3); > ret |= get_efi_value("/sys/firmware/efi/fw_vendor", "0x", > &esd->fw_vendor); > ret |= get_efi_value("/sys/firmware/efi/runtime", "0x", > > ============================================= > Kernel patch: > > --- linux-x86.orig/arch/x86/include/asm/efi.h > +++ linux-x86/arch/x86/include/asm/efi.h > @@ -167,7 +167,8 @@ struct efi_setup_data { > u64 __unused; > u64 tables; > u64 smbios; > - u64 reserved[8]; > + u64 smbios3; > + u64 reserved[7]; > }; > > extern u64 efi_setup; > --- linux-x86.orig/arch/x86/kernel/kexec-bzimage64.c > +++ linux-x86/arch/x86/kernel/kexec-bzimage64.c > @@ -144,6 +144,7 @@ prepare_add_efi_setup_data(struct boot_p > esd->fw_vendor = efi_fw_vendor; > esd->tables = efi_config_table; > esd->smbios = efi.smbios; > + esd->smbios3 = efi.smbios3; > > sd->type = SETUP_EFI; > sd->len = sizeof(struct efi_setup_data); > --- linux-x86.orig/arch/x86/platform/efi/quirks.c > +++ linux-x86/arch/x86/platform/efi/quirks.c > @@ -497,8 +497,8 @@ void __init efi_free_boot_services(void) > * their physical addresses therefore we pass them via setup_data and > * correct those entries to their respective physical addresses here. > * > - * Currently only handles smbios which is necessary for some firmware > - * implementation. > + * Currently only handles smbios and smbios3 which is necessary for > + * some firmware implementation. > */ > int __init efi_reuse_config(u64 tables, int nr_tables) > { > @@ -521,7 +521,7 @@ int __init efi_reuse_config(u64 tables, > goto out; > } > > - if (!data->smbios) > + if (!data->smbios && !data->smbios3) > goto out_memremap; > > sz = sizeof(efi_config_table_64_t); > @@ -538,8 +538,10 @@ int __init efi_reuse_config(u64 tables, > > guid = ((efi_config_table_64_t *)p)->guid; > > - if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID)) > + if (!efi_guidcmp(guid, SMBIOS_TABLE_GUID) && data->smbios) > ((efi_config_table_64_t *)p)->table = data->smbios; > + else if (!efi_guidcmp(guid, SMBIOS3_TABLE_GUID) && data->smbios3) > + ((efi_config_table_64_t *)p)->table = data->smbios3; > p += sz; > } > early_memunmap(tablep, nr_tables * sz); > > > Thanks > Dave > -- With Best Regards, Andy Shevchenko _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
