For arm64, the behavior of crashkernel=X has been changed, which
tries low allocation in DMA zone, and fall back to high allocation
if it fails.
We can also use "crashkernel=X,high" to select a high region above
DMA zone, which also tries to allocate at least 256M low memory in
DMA zone automatically.
"crashkernel=Y,low" can be used to allocate specified size low memory
in DMA zone.
For non-RPi4 platforms, change DMA zone memtioned above to DMA32 zone.
For x86 and arm64, we introduce threshold for the required memory.
if required size X is too large and leads to very little free low
memory after low allocation, the system may not work well.
So add a threshold and go for high allocation directly if the required
size is too large. The threshold is set as the half of low memory.
So update the Documentation.
Signed-off-by: Chen Zhou <chenzhou10@xxxxxxxxxx>
---
Documentation/admin-guide/kdump/kdump.rst | 25 ++++++++++++++++---
.../admin-guide/kernel-parameters.txt | 13 ++++++++--
2 files changed, 33 insertions(+), 5 deletions(-)
diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index 2da65fef2a1c..549611abc581 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -299,7 +299,16 @@ Boot into System Kernel
"crashkernel=64M@16M" tells the system kernel to reserve 64 MB of memory
starting at physical address 0x01000000 (16MB) for the dump-capture kernel.
- On x86 and x86_64, use "crashkernel=64M@16M".
+ On x86 use "crashkernel=64M@16M".
+
+ On x86_64, use "crashkernel=X" to select a region under 4G first, and
+ fall back to reserve region above 4G. And go for high allocation
+ directly if the required size is too large.
+ We can also use "crashkernel=X,high" to select a region above 4G, which
+ also tries to allocate at least 256M below 4G automatically and
+ "crashkernel=Y,low" can be used to allocate specified size low memory.
+ Use "crashkernel=Y@X" if you really have to reserve memory from specified
+ start address X.
On ppc64, use "crashkernel=128M@32M".
@@ -316,8 +325,18 @@ Boot into System Kernel
kernel will automatically locate the crash kernel image within the
first 512MB of RAM if X is not given.
- On arm64, use "crashkernel=Y[@X]". Note that the start address of
- the kernel, X if explicitly specified, must be aligned to 2MiB (0x200000).
+ On arm64, use "crashkernel=X" to try low allocation in DMA zone, and
+ fall back to high allocation if it fails. And go for high allocation
+ directly if the required size is too large.
+ We can also use "crashkernel=X,high" to select a high region above
+ DMA zone, which also tries to allocate at least 256M low memory in
+ DMA zone automatically.
+ "crashkernel=Y,low" can be used to allocate specified size low memory
+ in DMA zone.
+ For non-RPi4 platforms, change DMA zone memtioned above to DMA32 zone.
+ Use "crashkernel=Y@X" if you really have to reserve memory from
+ specified start address X. Note that the start address of the kernel,
+ X if explicitly specified, must be aligned to 2MiB (0x200000).
Load the Dump-capture Kernel
============================
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a1068742a6df..f7df572d8f64 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -727,6 +727,10 @@
[KNL, X86-64] Select a region under 4G first, and
fall back to reserve region above 4G when '@offset'
hasn't been specified.
+ [KNL, arm64] Try low allocation in DMA zone, fall back
+ to high allocation if it fails when '@offset' hasn't been
+ specified. For non-RPi4 platforms, change DMA zone to
+ DMA32 zone.
See Documentation/admin-guide/kdump/kdump.rst for further details.
crashkernel=range1:size1[,range2:size2,...][@offset]
@@ -743,6 +747,8 @@
Otherwise memory region will be allocated below 4G, if
available.
It will be ignored if crashkernel=X is specified.
+ [KNL, arm64] range in high memory.
+ Allow kernel to allocate physical memory region from top.
crashkernel=size[KMG],low
[KNL, X86-64] range under 4G. When crashkernel=X,high
is passed, kernel could allocate physical memory region
@@ -751,13 +757,16 @@
requires at least 64M+32K low memory, also enough extra
low memory is needed to make sure DMA buffers for 32-bit
devices won't run out. Kernel would try to allocate at
- at least 256M below 4G automatically.
+ least 256M below 4G automatically.
This one let user to specify own low range under 4G
for second kernel instead.
0: to disable low allocation.
It will be ignored when crashkernel=X,high is not used
or memory reserved is below 4G.
-
+ [KNL, arm64] range in low memory.
+ This one let user to specify a low range in DMA zone for
+ crash dump kernel. For non-RPi4 platforms, change DMA zone
+ to DMA32 zone.
cryptomgr.notests
[KNL] Disable crypto self-tests
--
2.20.1
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
