Re: [PATCH v7 1/4] x86: kdump: move reserve_crashkernel_low() into crash_core.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Jan 16, 2020, at 9:47 AM, John Donnelly <john.p.donnelly@xxxxxxxxxx> wrote:
> 
> 
> 
>> On Jan 16, 2020, at 9:17 AM, James Morse <james.morse@xxxxxxx> wrote:
>> 
>> Hi guys,
>> 
>> On 28/12/2019 09:32, Dave Young wrote:
>>> On 12/27/19 at 07:04pm, Chen Zhou wrote:
>>>> On 2019/12/27 13:54, Dave Young wrote:
>>>>> On 12/23/19 at 11:23pm, Chen Zhou wrote:
>>>>>> In preparation for supporting reserve_crashkernel_low in arm64 as
>>>>>> x86_64 does, move reserve_crashkernel_low() into kernel/crash_core.c.
>>>>>> 
>>>>>> Note, in arm64, we reserve low memory if and only if crashkernel=X,low
>>>>>> is specified. Different with x86_64, don't set low memory automatically.
>>>>> 
>>>>> Do you have any reason for the difference?  I'd expect we have same
>>>>> logic if possible and remove some of the ifdefs.
>>>> 
>>>> In x86_64, if we reserve crashkernel above 4G, then we call reserve_crashkernel_low()
>>>> to reserve low memory.
>>>> 
>>>> In arm64, to simplify, we call reserve_crashkernel_low() at the beginning of reserve_crashkernel()
>>>> and then relax the arm64_dma32_phys_limit if reserve_crashkernel_low() allocated something.
>>>> In this case, if reserve crashkernel below 4G there will be 256M low memory set automatically
>>>> and this needs extra considerations.
>> 
>>> Sorry that I did not read the old thread details and thought that is
>>> arch dependent.  But rethink about that, it would be better that we can
>>> have same semantic about crashkernel parameters across arches.  If we
>>> make them different then it causes confusion, especially for
>>> distributions.
>> 
>> Surely distros also want one crashkernel* string they can use on all platforms without
>> having to detect the kernel version, platform or changeable memory layout...
>> 
>> 
>>> OTOH, I thought if we reserve high memory then the low memory should be
>>> needed.  There might be some exceptions, but I do not know the exact
>>> one,
>> 
>>> can we make the behavior same, and special case those systems which
>>> do not need low memory reservation.
>> 
>> Its tricky to work out which systems are the 'normal' ones.
>> 
>> We don't have a fixed memory layout for arm64. Some systems have no memory below 4G.
>> Others have no memory above 4G.
>> 
>> Chen Zhou's machine has some memory below 4G, but its too precious to reserve a large
>> chunk for kdump. Without any memory below 4G some of the drivers won't work.
>> 
>> I don't see what distros can set as their default for all platforms if high/low are
>> mutually exclusive with the 'crashkernel=' in use today. How did x86 navigate this, ... or
>> was it so long ago?
>> 
>> No one else has reported a problem with the existing placement logic, hence treating this
>> 'low' thing as the 'in addition' special case.
> 
> 
> Hi,
> 
> I am seeing similar  Arm crash dump issues  on  5.4 kernels  where we need  rather large amount of crashkernel memory reserved that is not available below 4GB ( The maximum reserved size appears to be around 768M ) . When I pick memory range higher than 4GB , I see  adapters that fail to initialize :
> 
> 
> There is no low-memory  <4G  memory for DMA ;     
> 
> [   11.506792] kworker/0:14: page allocation failure: order:0, 
> mode:0x104(GFP_DMA32|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 
> [   11.518793] CPU: 0 PID: 150 Comm: kworker/0:14 Not tainted 
> 5.4.0-1948.3.el8uek.aarch64 #1 
> [   11.526955] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 
> 0ACKL025 01/18/2019 
> [   11.534948] Workqueue: events work_for_cpu_fn 
> [   11.539291] Call trace: 
> [   11.541727]  dump_backtrace+0x0/0x18c 
> [   11.545376]  show_stack+0x24/0x30 
> [   11.548679]  dump_stack+0xbc/0xe0 
> [   11.551982]  warn_alloc+0xf0/0x15c 
> [   11.555370]  __alloc_pages_slowpath+0xb4c/0xb84 
> [   11.559887]  __alloc_pages_nodemask+0x2d0/0x330 
> [   11.564405]  alloc_pages_current+0x8c/0xf8 
> [   11.568496]  ttm_bo_device_init+0x188/0x220 [ttm] 
> [   11.573187]  drm_vram_mm_init+0x58/0x80 [drm_vram_helper] 
> [   11.578572]  drm_vram_helper_alloc_mm+0x64/0xb0 [drm_vram_helper] 
> [   11.584655]  ast_mm_init+0x38/0x80 [ast] 
> [   11.588566]  ast_driver_load+0x474/0xa70 [ast] 
> [   11.593029]  drm_dev_register+0x144/0x1c8 [drm] 
> [   11.597573]  drm_get_pci_dev+0xa4/0x168 [drm] 
> [   11.601919]  ast_pci_probe+0x8c/0x9c [ast] 
> [   11.606004]  local_pci_probe+0x44/0x98 
> [   11.609739]  work_for_cpu_fn+0x20/0x30 
> [   11.613474]  process_one_work+0x1c4/0x41c 
> [   11.617470]  worker_thread+0x150/0x4b0 
> [   11.621206]  kthread+0x110/0x114 
> [   11.624422]  ret_from_fork+0x10/0x18 
> 
> This failure is related to a graphics adapter. 
> 
> The more complex kdump configurations that use networking stack to NFS mount a filesystem to dump to , or use ssh to copy to another machine,  require more crashkernel memory reservations than perhaps the “default*” settings of  a minimal kdump that creates a minimal  vmcore to local storage in  /var/crash. If crashkernel is too small I get Out of Memory issues and the entire vmcore  process fails. 
> 
> ( *default kdump setting I assume are a minimal vmcore to /var/crash using primary boot device where /root is located  ) 
> 
Hi Chen,


I was able to unit test these series of kernel  patches  applied to a 5.4.17 test kernel  along with the kexec CLI  change :

0001-arm64-kdump-add-another-DT-property-to-crash-dump-ke.patch

Applied to :

kexec-tools-2.0.19-12.0.4.el8.src.rpm

And obtained a vmcore using this cmdline :

BOOT_IMAGE=(hd6,gpt2)/vmlinuz-5.4.17-4-uek6m_ol8-jpdonnel+ root=/dev/mapper/ol01-root ro crashkernel=2048M@35G crashkernel=250M,low rd.lvm.lv=ol01/root rd.lvm.lv=ol01/swap console=ttyS4 loglevel=7

Can you add :

Tested-by: John Donnelly <John.p.donnelly@xxxxxxxxxx>


How can we  get these changes included into an rc kernel release  ?

Thanks,

John.


> 
> 
> 
>> 
>> 
>>>> previous discusses:
>>>> 	https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.org_lkml_2019_6_5_670&d=DwICAg&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=t2fPg9D87F7D8jm0_3CG9yoiIKdRg4qc_thBw4bzMhc&m=jOAu1DTDpohsWszalfTCYx46eGF19TSWVLchN5yBPgk&s=gS9BLOkmj78lP5L7SP6_VLHwvP249uWKaE2R7N7sxgM&e= 
>>>> 	https://urldefense.proofpoint.com/v2/url?u=https-3A__lkml.org_lkml_2019_6_13_229&d=DwICAg&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=t2fPg9D87F7D8jm0_3CG9yoiIKdRg4qc_thBw4bzMhc&m=jOAu1DTDpohsWszalfTCYx46eGF19TSWVLchN5yBPgk&s=U1Nis29n3A7XSBzED53fiE4MDAv5NlxYp1UorvvBOOw&e= 
>>> 
>>> Another concern from James:
>>> "
>>> With both crashk_low_res and crashk_res, we end up with two entries in /proc/iomem called
>>> "Crash kernel". Because its sorted by address, and kexec-tools stops searching when it
>>> find "Crash kernel", you are always going to get the kernel placed in the lower portion.
>>> "
>>> 
>>> The kexec-tools code is iterating all "Crash kernel" ranges and add them
>>> in an array.  In X86 code, it uses the higher range to locate memory.
>> 
>> Then my hurried reading of what the user-space code does was wrong!
>> 
>> If kexec-tools places the kernel in the low region, there may not be enough memory left
>> for whatever purpose it was reserved for. This was the motivation for giving it a
>> different name.
>> 
>> 
>> Thanks,
>> 
>> James
>> 
>> _______________________________________________
>> kexec mailing list
>> kexec@xxxxxxxxxxxxxxxxxxx
>> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.infradead.org_mailman_listinfo_kexec&d=DwICAg&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=t2fPg9D87F7D8jm0_3CG9yoiIKdRg4qc_thBw4bzMhc&m=jOAu1DTDpohsWszalfTCYx46eGF19TSWVLchN5yBPgk&s=bqp02iQDP_Ez-XvLIvj-IPHqbbZwMPlDgmEcG8vhXFE&e= 
> 
> 
> _______________________________________________
> kexec mailing list
> kexec@xxxxxxxxxxxxxxxxxxx
> https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.infradead.org_mailman_listinfo_kexec&d=DwIGaQ&c=RoP1YumCXCgaWHvlZYR8PZh8Bv7qIrMUB65eapI_JnE&r=t2fPg9D87F7D8jm0_3CG9yoiIKdRg4qc_thBw4bzMhc&m=whm9_BOrgAjJvBn0Ey_brHhFg2YMU_P0HF02dhgdgwU&s=vLar_m5JbicYwwuo6N84ZiBDGZUPM8bBLSPLQBtPZNY&e= 


_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux