This patch requires a small fix (which I will do in later revisions):
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 2ffdb3927549..c9faeac4b3a8 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2182,7 +2182,8 @@ static void its_cpu_init_lpis(void)
paddr &= GENMASK_ULL(51, 16);
WARN_ON(!gic_check_reserved_range(paddr, LPI_PENDBASE_SZ));
- its_free_pending_table(gic_data_rdist()->pend_page);
+ if (efi_enabled(EFI_CONFIG_TABLES))
+ its_free_pending_table(gic_data_rdist()->pend_page);
gic_data_rdist()->pend_page = NULL;
goto out;
reserved-memory does not need to be freed. However, I am confused why
it is needed to be freed in EFI case. Marc, can you please explain
this to me?
Thank you,
Pasha
On Mon, Aug 26, 2019 at 3:01 PM Pavel Tatashin
<pasha.tatashin@xxxxxxxxxx> wrote:
>
> Allow to use reserved memory for interrupt controller tables.
>
> Currently, it is not possible to do kexec reboots without possible memory
> corruption using device tree and GICv3 interrupt controller.
>
> GICv3 can be configured once during boot, and location of tables cannot
> be changed thereafter.
>
> The fix is to allow to reserve memory region in interrupt controller device
> property, and use it to do allocations.
>
> Signed-off-by: Pavel Tatashin <pasha.tatashin@xxxxxxxxxx>
> ---
> drivers/irqchip/irq-gic-v3-its.c | 82 ++++++++++++++++++++++++++++----
> 1 file changed, 72 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index d5f3508ca11f..aeda8760cc4e 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -47,6 +47,54 @@
>
> static u32 lpi_id_bits;
>
> +/*
> + * Describes reserved memory region in interrupt controller.
> + * The memory reserved: [pa_start, pa_end)
> + */
> +struct of_resv {
> + unsigned long pa_start;
> + unsigned long pa_end;
> +};
> +
> +static struct page __init *get_of_page(struct of_resv *resv, unsigned long size)
> +{
> + unsigned long pa = ALIGN(resv->pa_start, size);
> + unsigned long pa_next = pa + size;
> +
> + /* Check if there is enough memory reserved to do another allocation */
> + if (pa_next > resv->pa_end)
> + return NULL;
> +
> + resv->pa_start = pa_next;
> + memset(phys_to_virt(pa), 0, size);
> +
> + return phys_to_page(pa);
> +}
> +
> +/*
> + * Memory controller might have a reserved memory region to be used for table
> + * allocations. This is a requirement for kexec reboots.
> + */
> +static void __init its_of_mem_region(struct device_node *node,
> + struct of_resv **resv,
> + struct of_resv *resv_buf)
> +{
> + struct device_node *np = of_parse_phandle(node, "memory-region", 0);
> + struct resource mem_res;
> +
> + if (!np)
> + return;
> +
> + if (of_address_to_resource(np, 0, &mem_res)) {
> + pr_warn("%pOF: address to resource failed\n", np);
> + return;
> + }
> +
> + resv_buf->pa_start = mem_res.start;
> + resv_buf->pa_end = mem_res.start + resource_size(&mem_res);
> + *resv = resv_buf;
> +}
> +
> /*
> * We allocate memory for PROPBASE to cover 2 ^ lpi_id_bits LPIs to
> * deal with (one configuration byte per interrupt). PENDBASE has to
> @@ -1665,7 +1713,7 @@ static int gic_reserve_range(phys_addr_t addr, unsigned long size)
> return 0;
> }
>
> -static int __init its_setup_lpi_prop_table(void)
> +static int __init its_setup_lpi_prop_table(struct of_resv *resv)
> {
> if (gic_rdists->flags & RDIST_FLAGS_RD_TABLES_PREALLOCATED) {
> unsigned long pa;
> @@ -1676,7 +1724,10 @@ static int __init its_setup_lpi_prop_table(void)
> lpi_id_bits = (val & GICR_PROPBASER_IDBITS_MASK) + 1;
>
> pa = val & GENMASK_ULL(51, 12);
> - va = memremap(pa, LPI_PROPBASE_SZ, MEMREMAP_WB);
> + if (resv)
> + va = phys_to_virt(pa);
> + else
> + va = memremap(pa, LPI_PROPBASE_SZ, MEMREMAP_WB);
> gic_rdists->prop_table_pa = pa;
> gic_rdists->prop_table_va = va;
> } else {
> @@ -1685,7 +1736,10 @@ static int __init its_setup_lpi_prop_table(void)
> lpi_id_bits = min_t(u32,
> GICD_TYPER_ID_BITS(gic_rdists->gicd_typer),
> ITS_MAX_LPI_NRBITS);
> - page = its_allocate_prop_table(GFP_NOWAIT);
> + if (resv)
> + page = get_of_page(resv, LPI_PROPBASE_SZ);
> + else
> + page = its_allocate_prop_table(GFP_NOWAIT);
> if (!page) {
> pr_err("Failed to allocate PROPBASE\n");
> return -ENOMEM;
> @@ -2009,7 +2063,8 @@ static void its_free_pending_table(struct page *pt)
>
> /*
> * Booting with kdump and LPIs enabled is generally fine. Any other
> - * case is wrong in the absence of firmware/EFI support.
> + * case is wrong in the absence of firmware/EFI support or reserve-memory
> + * in device tree for interrupt controller.
> */
> static bool enabled_lpis_allowed(void)
> {
> @@ -2023,7 +2078,7 @@ static bool enabled_lpis_allowed(void)
> return gic_check_reserved_range(addr, LPI_PROPBASE_SZ);
> }
>
> -static int __init allocate_lpi_tables(void)
> +static int __init allocate_lpi_tables(struct of_resv *resv)
> {
> u64 val;
> int err, cpu;
> @@ -2039,7 +2094,7 @@ static int __init allocate_lpi_tables(void)
> pr_info("GICv3: Using preallocated redistributor tables\n");
> }
>
> - err = its_setup_lpi_prop_table();
> + err = its_setup_lpi_prop_table(resv);
> if (err)
> return err;
>
> @@ -2051,7 +2106,10 @@ static int __init allocate_lpi_tables(void)
> for_each_possible_cpu(cpu) {
> struct page *pend_page;
>
> - pend_page = its_allocate_pending_table(GFP_NOWAIT);
> + if (resv)
> + pend_page = get_of_page(resv, LPI_PENDBASE_SZ);
> + else
> + pend_page = its_allocate_pending_table(GFP_NOWAIT);
> if (!pend_page) {
> pr_err("Failed to allocate PENDBASE for CPU%d\n", cpu);
> return -ENOMEM;
> @@ -3957,16 +4015,20 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
> struct irq_domain *parent_domain)
> {
> struct device_node *of_node;
> + struct of_resv resv_buf;
> + struct of_resv *resv = NULL;
> struct its_node *its;
> bool has_v4 = false;
> int err;
>
> its_parent = parent_domain;
> of_node = to_of_node(handle);
> - if (of_node)
> + if (of_node) {
> its_of_probe(of_node);
> - else
> + its_of_mem_region(of_node, &resv, &resv_buf);
> + } else {
> its_acpi_probe();
> + }
>
> if (list_empty(&its_nodes)) {
> pr_warn("ITS: No ITS available, not enabling LPIs\n");
> @@ -3975,7 +4037,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists,
>
> gic_rdists = rdists;
>
> - err = allocate_lpi_tables();
> + err = allocate_lpi_tables(resv);
> if (err)
> return err;
>
> --
> 2.23.0
>
_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec
