On 07/02/19 at 10:21am, Dave Young wrote: > On 06/26/19 at 04:15pm, Baoquan He wrote: > > Hi Dave, > > > > We met an kdump kernel boot failure on a lenovo system. Kdump kernel > > failed to boot, but just reset to firmware to reboot system. And nothing > > is printed out. > > > > The machine is a big server, with 6T memory and many cpu, its graphic > > driver module is mgag200. > > > > When added 'earlyprintk=ttyS0' into kernel command line, it printed > > out only one line to console during kdump kernel booting: > > KASLR disabled: 'nokaslr' on cmdline. > > > > Then reset to firmware to reboot system. > > > > By further code debugging, the failure happened in > > arch/x86/boot/compressed/misc.c, during kernel decompressing stage. It's > > triggered by the vga printing. As you can see, in __putstr() of > > arch/x86/boot/compressed/misc.c, the code checks if earlyprintk= is > > specified, and print out to the target. And no matter if earlyprintk= is > > added or not, it will print to VGA. And printing to VGA caused it to > > reset to firmware. That's why we see nothing when didn't specify > > earlyprintk=, but see only one line of printing about the 'KASLR > > disabled'. > > > > To confirm it's caused by VGA printing, I blacklist the mgag200 by > > writting it into /etc/modprobe.d/blacklist.conf. The kdump kernel can > > boot up successfully. And add 'nomodeset' can also make it work. So it's > > for sure mgag driver or related code have something wrong when booting > > code tries to re-init it. > > > > This is the only case we ever see, tend to pursuit fix in mgag200 driver > > side. Any idea or suggestion? We have two machines to be able to > > reproduce it stablly. > > Personally I think early code should not blindly do vga writing, there > are cases that does not work: > 1. efi booted machine, just no output > 2. kdump kernel booted, writing to vga caused undefined state, for > example in your case it caused a system reset. > > So I suggest only write to vga when we see earlyprintk=vga in kernel > cmdline. I remember one customer ever attached a picture of kernel booting hang from monitor. I planned to disable vga when it's not specified, but changed my mind because not all machines are servers w/o monitor. Still there are many people using laptop, PC, they have vga printing, possibly have no console. When crash happened, maybe randomly, the vga printing could be the only witness. In above listed cases, case 1 doesn't output, seems efi need be fixed, but I can't see why it matters here. About case 2, do you have a specific example, except of this one? Printing to vga has been done so long time, if it does cause troubles, we need to mute it now. Thanks Baoquan _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
