Hello Petr, On Tue, Jun 5, 2018 at 1:31 PM, Petr Tesarik <ptesarik@xxxxxxx> wrote: > Hi all, > > I have observed hangs after crash on a Raspberry Pi 3 Model B+ board > when a panic kernel is loaded. I attached a hardware debugger and found > out that all CPU cores were stopped except one which was stuck in the > idle thread. It seems that irq_set_irqchip_state() may sleep, which is > definitely not safe after a kernel panic. Normally we limit the number of cpus in the crash kernel to 1 (via maxcpus=1) in distributions like fedora. Can you please share the command-line/bootargs which you use to invoke the crash kernel. Also do you get any console output from the crash kernel (you can try passing earlycon to the crash kernel to see if it crashes early enough)? If yes, can you please share the same. > If I'm right, then this is broken in general, but I have only ever seen > it on RPi 3 Model B+ (even RPi3 Model B works fine), so the issue may > be more subtle. FWIW the code for 32-bit ARM seems to work just fine > without this code in machine_kexec_mask_interrupts(): > > /* > * First try to remove the active state. If this > * fails, try to EOI the interrupt. > */ > ret = irq_set_irqchip_state(i, IRQCHIP_STATE_ACTIVE, false); > > I wonder what breaks if this call to irq_set_irqchip_state() is removed. > > For reference, here is a stack trace of the process which originally > triggered the panic: > > #0 __switch_to (prev=0xffff000008e62a00 <init_task>, next=0xffff80002b796080) at ../arch/arm64/kernel/process.c:355 > #1 0xffff0000088f584c in context_switch (rf=<optimized out>, next=<optimized out>, prev=<optimized out>, rq=<optimized out>) at ../kernel/sched/core.c:2896 > #2 __schedule (preempt=false) at ../kernel/sched/core.c:3457 > #3 0xffff0000088f5eac in schedule () at ../kernel/sched/core.c:3516 > #4 0xffff0000088f9448 in schedule_timeout (timeout=<optimized out>) at ../kernel/time/timer.c:1743 > #5 0xffff0000088f6afc in do_wait_for_common (state=<optimized out>, timeout=500, action=<optimized out>, x=<optimized out>) at ../kernel/sched/completion.c:77 > #6 __wait_for_common (state=<optimized out>, timeout=<optimized out>, action=<optimized out>, x=<optimized out>) at ../kernel/sched/completion.c:96 > #7 wait_for_common (x=0xffff000008e53848 <init_thread_union+14408>, timeout=500, state=<optimized out>) at ../kernel/sched/completion.c:104 > #8 0xffff0000088f6c1c in wait_for_completion_timeout (x=0xffff000008e53848 <init_thread_union+14408>, timeout=500) at ../kernel/sched/completion.c:144 > #9 0xffff000000a19f1c in usb_start_wait_urb (urb=0xffff80002c1cd700, timeout=5000, actual_length=0xffff000008e538dc <init_thread_union+14556>) > at ../drivers/usb/core/message.c:61 > #10 0xffff000000a1a05c in usb_internal_control_msg (timeout=<optimized out>, len=<optimized out>, data=<optimized out>, cmd=<optimized out>, pipe=<optimized out>, > usb_dev=<optimized out>) at ../drivers/usb/core/message.c:100 > #11 usb_control_msg (dev=0xffff80002c348000, pipe=2147484800, request=161 '\241', requesttype=192 '\300', value=0, index=152, data=0xffff80002b6fa080, size=4, > timeout=5000) at ../drivers/usb/core/message.c:151 > #12 0xffff000001001cd0 in lan78xx_read_reg (index=152, data=0xffff000008e5396c <init_thread_union+14700>, dev=<optimized out>, dev=<optimized out>) > at ../drivers/net/usb/lan78xx.c:425 Hmmm, this seems a bit misplaced, but are you using a usb-ethernet adapter which causes a URB submission to timeout? > #13 0xffff00000100365c in lan78xx_irq_bus_sync_unlock (irqd=<optimized out>) at ../drivers/net/usb/lan78xx.c:1909 > #14 0xffff00000813e590 in chip_bus_sync_unlock (desc=<optimized out>) at ../kernel/irq/internals.h:129 > #15 __irq_put_desc_unlock (desc=0xffff80002c361c00, flags=128, bus=true) at ../kernel/irq/irqdesc.c:804 > #16 0xffff00000813f604 in irq_put_desc_busunlock (flags=<optimized out>, desc=<optimized out>) at ../kernel/irq/internals.h:155 > #17 irq_set_irqchip_state (irq=<optimized out>, which=<optimized out>, val=false) at ../kernel/irq/manage.c:2136 > #18 0xffff00000809b7d4 in machine_kexec_mask_interrupts () at ../arch/arm64/kernel/machine_kexec.c:233 > #19 machine_crash_shutdown (regs=<optimized out>) at ../arch/arm64/kernel/machine_kexec.c:259 > #20 0xffff000008180fd4 in __crash_kexec (regs=0xffff000008e53d70 <init_thread_union+15728>) at ../kernel/kexec_core.c:943 > #21 0xffff0000081810e4 in crash_kexec (regs=0xffff000008e53d70 <init_thread_union+15728>) at ../kernel/kexec_core.c:965 > #22 0xffff00000808ab58 in die (str=<optimized out>, regs=0xffff000008e53d70 <init_thread_union+15728>, err=-2046820348) at ../arch/arm64/kernel/traps.c:266 > #23 0xffff0000080a1c14 in __do_kernel_fault (mm=0x0, addr=0, esr=2248146948, regs=0xffff000008e53d70 <init_thread_union+15728>) at ../arch/arm64/mm/fault.c:226 > #24 0xffff0000088fc8dc in do_page_fault (addr=0, esr=2248146948, regs=0xffff000008e53d70 <init_thread_union+15728>) at ../arch/arm64/mm/fault.c:476 > #25 0xffff0000088fccdc in do_translation_fault (addr=0, esr=2248146948, regs=0xffff000008e53d70 <init_thread_union+15728>) at ../arch/arm64/mm/fault.c:502 > #26 0xffff000008081478 in do_mem_abort (addr=0, esr=2248146948, regs=0xffff000008e53d70 <init_thread_union+15728>) at ../arch/arm64/mm/fault.c:657 > #27 0xffff000008082dd0 in el1_sync () at ../arch/arm64/kernel/entry.S:548 The ESR value from the logs (2248146948) indicates the following about the panic causes (see ARMv8 Architecture Reference Manual for more details): EC -> 100001, Instruction Abort taken without a change in Exception level (Used for MMU faults generated by instruction accesses and Synchronous external aborts, including synchronous parity or ECC errors. Not used for debug related exceptions.) FnV -> 0, FAR is valid IFSC -> 000100, Translation fault, level 0 So in brief an Instruction Abort was taken at exception level EL1(?) which was caused by a translation fault at level 0 and the FAR register holds the faulting Virtual Address. So, since you have the hardware debugger, can you try and see the values of FAR (Fault Address Register) and ELR registers at this point via the debugger and see if they can indicate the Faulty Address from which the exception was taken and debug using the same. If you can share the earlycon messages from the crashkernel and the values of the above registers, can help you further with debugging the issue which you are seeing. Thanks, Bhupesh _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
