On 03/01/18 at 01:05pm, Bjorn Helgaas wrote: > [+cc Joerg, David, iommu list] > > On Thu, Mar 01, 2018 at 12:44:26PM -0500, Sinan Kaya wrote: > > Hi, > > > > We are seeing IOMMU faults when booting the kdump kernel on ARM64. > > > > [ 7.220162] arm-smmu-v3 arm-smmu-v3.0.auto: event 0x02 received: > > [ 7.226123] arm-smmu-v3 arm-smmu-v3.0.auto: 0x0000010000000002 > > [ 7.232023] arm-smmu-v3 arm-smmu-v3.0.auto: 0x0000000000000000 > > [ 7.237925] arm-smmu-v3 arm-smmu-v3.0.auto: 0x0000000000000000 > > [ 7.243827] arm-smmu-v3 arm-smmu-v3.0.auto: 0x0000000000000000 > > > > This is Nate's interpretation of the fault: > > > > "The PCI device is sending transactions just after the SMMU was > > reset/reinitialized which is problematic because the device has not > > yet been added to the SMMU and thus should not be doing *any* DMA. > > DMA from the PCI devices should be quiesced prior to starting the > > crashdump kernel or you risk overwriting portions of memory you > > meant to preserve. In this case the SMMU was actually doing you a > > favor by blocking these errant DMA operations!!" This seems an known issue which existed on x86 arch with intel vt-d or amd-vi iommu deployed. Both of them have been fixed on x86. The root cause is that kexec/kdump jumping is a warm reboot, it skips bios/firmware. That left behind on-flight DMA which is started in 1st kernel, and on-going during kdump kernel bootup. Then iommu devices init will cause the on-flight DMA being stray and access those memory region violently until pci devices initialization. On x86, for intel vt-d iommu, patches and discussion can be found here: https://lists.onap.org/pipermail/iommu/2015-May/012948.html Finally, Joerg made a formal fix to make it. On amd-iommu, I made a patchset with Joerg's help. http://linux.kernel.narkive.com/Przi0Xaf/patch-v10-00-12-fix-the-on-flight-dma-issue-on-system-with-amd-iommu On arm64, not sure how different the smmu is, you might need to do the similar thing. Personal opinion, just for reference. Thanks Baoquan > > > > I think this makes sense especially for the IOMMU enabled case on > > the host where an IOVA can overlap with the region of memory kdump > > reserved for itself. > > > > Apparently, there has been similar concerns in the past. > > > > https://www.fujitsu.com/jp/documents/products/software/os/linux/catalog/LinuxConJapan2013-Indoh.pdf > > > > and was not addressed globally due to IOMMU+PCI driver ordering > > issues and bugs in HW due to hot reset. > > > > https://lkml.org/lkml/2012/8/3/160 > > > > Hot reset as mentioned is destructive and may not be the best > > implementation choice. However, most of the modern endpoints > > support PCIE function level reset. > > > > One other solution is for SMMUv3 driver to reserve the kdump used > > IOVA addresses. > > > > Another solution is for the SMMUv3 driver to disable PCIe devices > > behind the SMMU if it see SMMU is already enabled. > > What problem are you trying to solve? If the IOMMU is blocking DMA > after the kdump kernel starts up, that sounds like the desired > behavior. > > _______________________________________________ > kexec mailing list > kexec@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/kexec _______________________________________________ kexec mailing list kexec@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/kexec
