Re: [PATCH] makedumpfile/arm64: Add '--mem-usage' support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Fri, Feb 9, 2018 at 3:06 PM, Bhupesh Sharma <bhsharma@xxxxxxxxxx> wrote:
> Its good to have the makedumpfile '--mem-usage' support
> for arm64 architecture as well, as it allows one to see the page numbers
> of current system (1st kernel) in different use.
>
> Using this we can know how many pages are dumpable when different
> dump_level is specified.
>
> Normally for x86_64, makedumpfile analyzes the 'System Ram' and
> 'kernel text' program segment of /proc/kcore excluding
> the crashkernel range, then calculates the page number of different
> kind per vmcoreinfo.
>
> We use the similar logic for arm64, but in addition make the '--mem-usage'
> usage dependent on the VMLINUX file being passed. This is done to allow
> information like VA_BITS being determined from kernel symbol like
> _stext. This allows us to get the VA_BITS before 'set_kcore_vmcoreinfo()'
> is called.
>
> Also I have validated the '--mem-usage' makedumpfile option on several
> ppc64/ppc64le and s390x machines, so update the makedumpfile.8
> documentation to indicate that '--mem-usage' option is supported
> not only on x86_64, but also on ppc64, s390x and arm64.
>
> After this patch, when using the '--mem-usage' option with makedumpfile,
> we get the correct information about the different pages. For e.g.
> here is an output from my arm64 board:
>
> TYPE            PAGES                   EXCLUDABLE      DESCRIPTION
> ----------------------------------------------------------------------
> ZERO            49524                   yes             Pages filled with zero
> NON_PRI_CACHE   15143                   yes             Cache pages without private flag
> PRI_CACHE       29147                   yes             Cache pages with private flag
> USER            3684                    yes             User process pages
> FREE            1450569                 yes             Free pages
> KERN_DATA       14243                   no              Dumpable kernel data
>
> page size:              65536
> Total pages on system:  1562310
> Total size on system:   102387548160     Byte
>
> Cc: Masaki Tachibana <mas-tachibana@xxxxxxxxxxxxx>
> Cc: Takuya Nakayama <tak-nakayama@xxxxxxxxxxxxx>
> Cc: Daisuke Nishimura <dai-nishimura@xxxxxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhsharma@xxxxxxxxxx>

Ping. Any review comments on this?

Regards,
Bhupesh

> ---
>  arch/arm64.c   | 51 ++++++++++++++++++++++++++++++++++++++++++++++++---
>  makedumpfile.8 | 11 +++++++++--
>  makedumpfile.c | 25 +++++++++++++++++++++++--
>  makedumpfile.h |  1 +
>  4 files changed, 81 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64.c b/arch/arm64.c
> index 25d7a1f4db98..91f113f6447c 100644
> --- a/arch/arm64.c
> +++ b/arch/arm64.c
> @@ -48,6 +48,12 @@ static unsigned long kimage_voffset;
>  #define SZ_64K                 (64 * 1024)
>  #define SZ_128M                        (128 * 1024 * 1024)
>
> +#define PAGE_OFFSET_36 ((0xffffffffffffffffUL) << 36)
> +#define PAGE_OFFSET_39 ((0xffffffffffffffffUL) << 39)
> +#define PAGE_OFFSET_42 ((0xffffffffffffffffUL) << 42)
> +#define PAGE_OFFSET_47 ((0xffffffffffffffffUL) << 47)
> +#define PAGE_OFFSET_48 ((0xffffffffffffffffUL) << 48)
> +
>  #define pgd_val(x)             ((x).pgd)
>  #define pud_val(x)             (pgd_val((x).pgd))
>  #define pmd_val(x)             (pud_val((x).pud))
> @@ -140,8 +146,6 @@ pud_offset(pgd_t *pgda, pgd_t *pgdv, unsigned long vaddr)
>
>  static int calculate_plat_config(void)
>  {
> -       va_bits = NUMBER(VA_BITS);
> -
>         /* derive pgtable_level as per arch/arm64/Kconfig */
>         if ((PAGESIZE() == SZ_16K && va_bits == 36) ||
>                         (PAGESIZE() == SZ_64K && va_bits == 42)) {
> @@ -188,7 +192,6 @@ get_machdep_info_arm64(void)
>         kimage_voffset = NUMBER(kimage_voffset);
>         info->max_physmem_bits = PHYS_MASK_SHIFT;
>         info->section_size_bits = SECTIONS_SIZE_BITS;
> -       info->page_offset = 0xffffffffffffffffUL << (va_bits - 1);
>
>         DEBUG_MSG("kimage_voffset   : %lx\n", kimage_voffset);
>         DEBUG_MSG("max_physmem_bits : %lx\n", info->max_physmem_bits);
> @@ -219,6 +222,48 @@ get_xen_info_arm64(void)
>  int
>  get_versiondep_info_arm64(void)
>  {
> +       unsigned long long stext;
> +
> +       /* We can read the _stext symbol from vmlinux and determine the
> +        * VA_BITS and page_offset.
> +        */
> +
> +       /* Open the vmlinux file */
> +       open_kernel_file();
> +       set_dwarf_debuginfo("vmlinux", NULL,
> +                       info->name_vmlinux, info->fd_vmlinux);
> +
> +       if (!get_symbol_info())
> +               return FALSE;
> +
> +       /* Get the '_stext' symbol */
> +       if (SYMBOL(_stext) == NOT_FOUND_SYMBOL) {
> +               ERRMSG("Can't get the symbol of _stext.\n");
> +               return FALSE;
> +       } else {
> +               stext = SYMBOL(_stext);
> +       }
> +
> +       /* Derive va_bits as per arch/arm64/Kconfig */
> +       if ((stext & PAGE_OFFSET_36) == PAGE_OFFSET_36) {
> +               va_bits = 36;
> +       } else if ((stext & PAGE_OFFSET_39) == PAGE_OFFSET_39) {
> +               va_bits = 39;
> +       } else if ((stext & PAGE_OFFSET_42) == PAGE_OFFSET_42) {
> +               va_bits = 42;
> +       } else if ((stext & PAGE_OFFSET_47) == PAGE_OFFSET_47) {
> +               va_bits = 47;
> +       } else if ((stext & PAGE_OFFSET_48) == PAGE_OFFSET_48) {
> +               va_bits = 48;
> +       } else {
> +               ERRMSG("Cannot find a proper _stext for calculating VA_BITS\n");
> +               return FALSE;
> +       }
> +
> +       info->page_offset = (0xffffffffffffffffUL) << (va_bits - 1);
> +
> +       DEBUG_MSG("page_offset=%lx, va_bits=%d\n", info->page_offset, va_bits);
> +
>         return TRUE;
>  }
>
> diff --git a/makedumpfile.8 b/makedumpfile.8
> index 15db7947d62f..be9620035316 100644
> --- a/makedumpfile.8
> +++ b/makedumpfile.8
> @@ -593,7 +593,7 @@ last cleared on the crashed kernel, through "dmesg --clear" for example.
>
>  .TP
>  \fB\-\-mem-usage\fR
> -This option is only for x86_64.
> +This option is currently supported on x86_64, arm64, ppc64 and s390x.
>  This option is used to show the page numbers of current system in different
>  use. It should be executed in 1st kernel. By the help of this, user can know
>  how many pages is dumpable when different dump_level is specified. It analyzes
> @@ -601,12 +601,19 @@ the 'System Ram' and 'kernel text' program segment of /proc/kcore excluding
>  the crashkernel range, then calculates the page number of different kind per
>  vmcoreinfo. So currently /proc/kcore need be specified explicitly.
>
> +For arm64, path to vmlinux file should be specified as well.
> +
>  .br
> -.B Example:
> +.B Example (for architectures other than arm64):
>  .br
>  # makedumpfile \-\-mem-usage /proc/kcore
> +
> +.br
> +.B Example (for arm64 architecture):
>  .br
>
> +# makedumpfile \-\-mem-usage vmlinux /proc/kcore
> +.br
>
>  .TP
>  \fB\-\-diskset=VMCORE\fR
> diff --git a/makedumpfile.c b/makedumpfile.c
> index ed138d339d9a..b38b5000aa74 100644
> --- a/makedumpfile.c
> +++ b/makedumpfile.c
> @@ -11090,7 +11090,14 @@ static struct option longopts[] = {
>         {"cyclic-buffer", required_argument, NULL, OPT_CYCLIC_BUFFER},
>         {"eppic", required_argument, NULL, OPT_EPPIC},
>         {"non-mmap", no_argument, NULL, OPT_NON_MMAP},
> +#ifdef __aarch64__
> +       /* VMLINUX file is required for aarch64 for get
> +        * the symbols required to calculate va_bits.
> +        */
> +       {"mem-usage", required_argument, NULL, OPT_MEM_USAGE},
> +#else
>         {"mem-usage", no_argument, NULL, OPT_MEM_USAGE},
> +#endif
>         {"splitblock-size", required_argument, NULL, OPT_SPLITBLOCK_SIZE},
>         {"work-dir", required_argument, NULL, OPT_WORKING_DIR},
>         {"num-threads", required_argument, NULL, OPT_NUM_THREADS},
> @@ -11201,8 +11208,22 @@ main(int argc, char *argv[])
>                         info->flag_partial_dmesg = 1;
>                         break;
>                 case OPT_MEM_USAGE:
> -                      info->flag_mem_usage = 1;
> -                      break;
> +                       info->flag_mem_usage = 1;
> +#ifdef __aarch64__
> +                       /* VMLINUX file is required for aarch64 for get
> +                        * the symbols required to calculate va_bits and
> +                        * it should be the 1st command parameter being
> +                        * specified.
> +                        */
> +                       if (strcmp(optarg, "/proc/kcore") == 0) {
> +                               MSG("vmlinux path should be 1st commandline parameter with --mem-usage option.\n");
> +                               goto out;
> +                       }
> +                       else {
> +                               info->name_vmlinux = optarg;
> +                       }
> +#endif
> +                       break;
>                 case OPT_COMPRESS_SNAPPY:
>                         info->flag_compress = DUMP_DH_COMPRESSED_SNAPPY;
>                         break;
> diff --git a/makedumpfile.h b/makedumpfile.h
> index 01eece231475..f65d91870b73 100644
> --- a/makedumpfile.h
> +++ b/makedumpfile.h
> @@ -2308,6 +2308,7 @@ struct elf_prstatus {
>  /*
>   * Function Prototype.
>   */
> +int open_kernel_file(void);
>  mdf_pfn_t get_num_dumpable_cyclic(void);
>  mdf_pfn_t get_num_dumpable_cyclic_withsplit(void);
>  int get_loads_dumpfile_cyclic(void);
> --
> 2.7.4
>

_______________________________________________
kexec mailing list
kexec@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/kexec



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux