The platform is a PVHVM guest of CentOS 7 (x86_64) running on a XenServer (version 6.5 and 7.2 both have the same behavior). This is the kexec-tools rpm build we are using: kexec-tools-2.0.7-50.el7.x86_64 If we run these two commands: kexec --load /boot/vmlinux-<current kernel> --initrd=/boot/initramfs <corresponding initramfs for current kernel> --reuse-cmdline kexec --exec The first line succeeds without errors, but the second one causes the VM to immediately shutdown, and there's no further output on the console. We've tried adding a number of different kernel command line options, such as: debug=1 early_printk=xen loglevel=9 We've also tried blacklisting the PV drivers. This sequence works fine on KVM, VMware, and also on bare-metal machines. Is this expected behavior on Xen with CentOS 7.x? We have scoured the kexec-tools mailing list, googled extensively, and haven't come up with much help. We've also tried changing various kernel config parameters related to Xen, but the behavior doesn't change. Any info, debugging advice, suggestions would be appreciated. Thanks for your consideration, - Corey Corey Ashford IBM Embedded Linux, software engineer cjashfor at us.ibm.com
