On 06/16/16 at 05:39pm, Thiago Jung Bauermann wrote:
> Am Donnerstag, 16 Juni 2016, 09:58:53 schrieb Dave Young:
> > On 06/15/16 at 01:21pm, Thiago Jung Bauermann wrote:
> > > +/**
> > > + * arch_kexec_walk_mem - call func(data) on free memory regions
> > > + * @image_type: kimage.type
> > > + * @top_down: Start from the highest address?
> > > + * @data: Argument to pass to @func.
> > > + * @func: Function to call for each memory region.
> > > + *
> > > + * Return: The memory walk will stop when func returns a non-zero value
> > > + * and that value will be returned. If all free regions are visited
> > > without + * func returning non-zero, then zero will be returned.
> > > + */
> > > +int __weak arch_kexec_walk_mem(unsigned int image_type, bool top_down,
> > > + void *data, int (*func)(u64, u64, void *))
> > > +{
> >
> > top_down is also not used?
>
> It's unused in the default implementation, but the powerpc implementation in patch 8 uses it:
Well, arch_kexec_walk_mem use kbuf as "data", you can even drop
"image_type" since kbuf has all you want kbuf->image->type, and
kbuf->top_down
int __weak arch_kexec_walk_mem(struct kexec_buf *kbuf,
int (*func)(u64, u64, void *))
>
> int arch_kexec_walk_mem(unsigned int type, bool top_down, void *data,
> int (*func)(u64, u64, void *))
> {
> int ret = 0;
> u64 i;
> phys_addr_t mstart, mend;
>
> if (top_down) {
> for_each_free_mem_range_reverse(i, NUMA_NO_NODE, 0,
> &mstart, &mend, NULL) {
> ret = func(mstart, mend, data);
> if (ret)
> break;
> }
> } else {
> for_each_free_mem_range(i, NUMA_NO_NODE, 0, &mstart, &mend,
> NULL) {
> ret = func(mstart, mend, data);
> if (ret)
> break;
> }
> }
>
> return ret;
> }
>
> > Rethink about the argument name type should be better than image_type,
> > it is obvious in the comments and the code and simpler.
>
> Ok, renamed in the patch below.
>
> []'s
> Thiago Jung Bauermann
> IBM Linux Technology Center
>
>
> kexec_file: Generalize kexec_add_buffer.
>
> Allow architectures to specify different memory walking functions for
> kexec_add_buffer. Intel uses iomem to track reserved memory ranges,
> but PowerPC uses the memblock subsystem.
>
> Signed-off-by: Thiago Jung Bauermann <bauerman at linux.vnet.ibm.com>
> Cc: Eric Biederman <ebiederm at xmission.com>
> Cc: Dave Young <dyoung at redhat.com>
> Cc: kexec at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
>
> diff --git a/include/linux/kexec.h b/include/linux/kexec.h
> index e8acb2b43dd9..42b31f2e1d88 100644
> --- a/include/linux/kexec.h
> +++ b/include/linux/kexec.h
> @@ -315,6 +315,8 @@ int __weak arch_kexec_apply_relocations_add(const Elf_Ehdr *ehdr,
> Elf_Shdr *sechdrs, unsigned int relsec);
> int __weak arch_kexec_apply_relocations(const Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
> unsigned int relsec);
> +int __weak arch_kexec_walk_mem(unsigned int type, bool top_down, void *data,
> + int (*func)(u64, u64, void *));
> void arch_kexec_protect_crashkres(void);
> void arch_kexec_unprotect_crashkres(void);
>
> diff --git a/kernel/kexec_file.c b/kernel/kexec_file.c
> index b6eec7527e9f..989647a324f2 100644
> --- a/kernel/kexec_file.c
> +++ b/kernel/kexec_file.c
> @@ -428,6 +428,29 @@ static int locate_mem_hole_callback(u64 start, u64 end, void *arg)
> return locate_mem_hole_bottom_up(start, end, kbuf);
> }
>
> +/**
> + * arch_kexec_walk_mem - call func(data) on free memory regions
> + * @type: kimage.type
> + * @top_down: Start from the highest address?
> + * @data: Argument to pass to @func.
> + * @func: Function to call for each memory region.
> + *
> + * Return: The memory walk will stop when func returns a non-zero value
> + * and that value will be returned. If all free regions are visited without
> + * func returning non-zero, then zero will be returned.
> + */
> +int __weak arch_kexec_walk_mem(unsigned int type, bool top_down, void *data,
> + int (*func)(u64, u64, void *))
> +{
> + if (type == KEXEC_TYPE_CRASH)
> + return walk_iomem_res_desc(crashk_res.desc,
> + IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY,
> + crashk_res.start, crashk_res.end,
> + data, func);
> + else
> + return walk_system_ram_res(0, ULONG_MAX, data, func);
> +}
> +
> /*
> * Helper function for placing a buffer in a kexec segment. This assumes
> * that kexec_mutex is held.
> @@ -472,14 +495,8 @@ int kexec_add_buffer(struct kimage *image, char *buffer, unsigned long bufsz,
> kbuf->top_down = top_down;
>
> /* Walk the RAM ranges and allocate a suitable range for the buffer */
> - if (image->type == KEXEC_TYPE_CRASH)
> - ret = walk_iomem_res_desc(crashk_res.desc,
> - IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY,
> - crashk_res.start, crashk_res.end, kbuf,
> - locate_mem_hole_callback);
> - else
> - ret = walk_system_ram_res(0, -1, kbuf,
> - locate_mem_hole_callback);
> + ret = arch_kexec_walk_mem(image->type, top_down, kbuf,
> + locate_mem_hole_callback);
> if (ret != 1) {
> /* A suitable memory range could not be found for buffer */
> return -EADDRNOTAVAIL;
>
>
> _______________________________________________
> kexec mailing list
> kexec at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kexec
Thanks
Dave
