[Makedumpfile PATCH V2 2/4] x86_64: translate all VA to PA using page table values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/09/16 at 03:40pm, Pratyush Anand wrote:
> > > -	page_dir  = SYMBOL(init_level4_pgt);
> > > +	page_dir = SYMBOL(init_level4_pgt) - __START_KERNEL_map + phys_base;
> > 
> > I found that this change breaks the backward compatibility for
> > kernel 2.6.21 or older since phys_base was introduced in kernel 2.6.22
> > by the commit below:
> > 
> >   commit 1ab60e0f72f71ec54831e525a3e1154f1c092408
> >   Author: Vivek Goyal <vgoyal at in.ibm.com>
> >   Date:   Wed May 2 19:27:07 2007 +0200
> > 
> >       [PATCH] x86-64: Relocatable Kernel Support
> > 
> > There is no problem if phys_base is always 0 in older kernel, but
> > get_phys_base_x86_64() calculates "phys_base = 0x100000" from my vmcore:

This is really awkward. Checked code, found PAGE_OFFSET is
0xffff810000000000 before 2.6.26, then changed to 0xffff880000000000
after that. Can we check the page_offset calculated from pt_load
segments, meanwhile check if has VMCOREINFO and osrelease after 2.6.21.

With both of above condition, we could set phys_vase to 0. Not sure if
this can solve the existing problem.

> > 
> >   Type           Offset             VirtAddr           PhysAddr
> >                  FileSiz            MemSiz              Flags  Align
> >   NOTE           0x0000000000000190 0x0000000000000000 0x0000000000000000
> >                  0x0000000000000590 0x0000000000000590         0
> >   LOAD           0x0000000000000720 0xffffffff80000000 0x0000000000100000    // CONFIG_PHYSICAL_START = 0x100000
> >                  0x00000000008b2000 0x00000000008b2000  RWE    0
> >   LOAD           0x00000000008b2720 0xffff810000000000 0x0000000000000000
> >                  0x00000000000a0000 0x00000000000a0000  RWE    0
> >   LOAD           0x0000000000952720 0xffff810000100000 0x0000000000100000
> >                  0x0000000000f00000 0x0000000000f00000  RWE    0
> >   LOAD           0x0000000001852720 0xffff810005000000 0x0000000005000000
> >                  0x00000000caf70000 0x00000000caf70000  RWE    0
> >   LOAD           0x00000000cc7c2720 0xffff810100000000 0x0000000100000000
> >                  0x0000000070000000 0x0000000070000000  RWE    0
> > 
> > Of course we shouldn't use that invalid phys_base:
> > 
> >   crash> sym init_level4_pgt
> >   ffffffff80101000 (T) init_level4_pgt
> >   crash> vtop ffffffff80101000
> >   VIRTUAL           PHYSICAL
> >   ffffffff80101000  101000               // just "VIRTUAL - __START_KERNEL_map"
> > 
> >   PML4 DIRECTORY: ffffffff80101000
> >   PAGE DIRECTORY: 103027
> >      PUD: 103ff0 => 105027
> >      PMD: 105000 => 1e3
> >     PAGE: 0  (2MB)
> > 
> >   PTE  PHYSICAL  FLAGS
> >   1e3      0     (PRESENT|RW|ACCESSED|DIRTY|PSE|GLOBAL)
> > 
> >         PAGE        PHYSICAL      MAPPING       INDEX CNT FLAGS
> >   ffff810005004838    101000                0        0  1 400
> >   crash>
> > 
> > At first I thought about setting 0 to phys_base if the kernel is
> > older than 2.6.22, but unfortunately we can't get the kernel version
> > before getting correct phys_base since VtoP is necessary to read
> > system_utsname.
> > (and 2.6.21 doesn't have VMCOREINFO, OSRELEASE can't be used too.)
> 
> We can use this fact may be. So, when has_vmcoreinfo() is false we can
> consider it as old kernel and can set phys_start as 0.
> 
> 
> Bao, any opnion?
> 
> ~Pratyush



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux