uniquely identifying KDUMP files that originate from QEMU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




----- Original Message -----
> From: HATAYAMA Daisuke <d.hatayama at jp.fujitsu.com>
> To: ptesarik at suse.cz
> Cc: lersek at redhat.com, kexec at lists.infradead.org
> Subject: Re: uniquely identifying KDUMP files that originate from QEMU
> Message-ID:
> 	<20141112.120838.303682123986142686.d.hatayama at jp.fujitsu.com>
> Content-Type: Text/Plain; charset=us-ascii
> 
> From: Petr Tesarik <ptesarik at suse.cz>
> Subject: Re: uniquely identifying KDUMP files that originate from QEMU
> Date: Tue, 11 Nov 2014 13:09:13 +0100
> 
> > On Tue, 11 Nov 2014 12:22:52 +0100
> > Laszlo Ersek <lersek at redhat.com> wrote:
> > 
> >> (Note: I'm not subscribed to either qemu-devel or the kexec list; please
> >> keep me CC'd.)
> >> 
> >> QEMU is able to dump the guest's memory in KDUMP format (kdump-zlib,
> >> kdump-lzo, kdump-snappy) with the "dump-guest-memory" QMP command.
> >> 
> >> The resultant vmcore is usually analyzed with the "crash" utility.
> >> 
> >> The original tool producing such files is kdump. Unlike the procedure
> >> performed by QEMU, kdump runs from *within* the guest (under a kexec'd
> >> kdump kernel), and has more information about the original guest kernel
> >> state (which is being dumped) than QEMU. To QEMU, the guest kernel state
> >> is opaque.
> >> 
> >> For this reason, the kdump preparation logic in QEMU hardcodes a number
> >> of fields in the kdump header. The direct issue is the "phys_base"
> >> field. Refer to dump.c, functions create_header32(), create_header64(),
> >> and "include/sysemu/dump.h", macro PHYS_BASE (with the replacement text
> >> "0").
> >> 
> >> http://git.qemu.org/?p=qemu.git;a=blob;f=dump.c;h=9c7dad8f865af3b778589dd0847e450ba9a75b9d;hb=HEAD
> >> 
> >> http://git.qemu.org/?p=qemu.git;a=blob;f=include/sysemu/dump.h;h=7e4ec5c7d96fb39c943d970d1683aa2dc171c933;hb=HEAD
> >> 
> >> This works in most cases, because the guest Linux kernel indeed tends to
> >> be loaded at guest-phys address 0. However, when the guest Linux kernel
> >> is booted on top of OVMF (which has a somewhat unusual UEFI memory map),
> >> then the guest Linux kernel is loaded at 16MB, thereby getting out of
> >> sync with the phys_base=0 setting visible in the KDUMP header.
> >> 
> >> This trips up the "crash" utility.
> >> 
> >> Dave worked around the issue in "crash" for ELF format dumps -- "crash"
> >> can identify QEMU as the originator of the vmcore by finding the QEMU
> >> notes in the ELF vmcore. If those are present, then "crash" employs a
> >> heuristic, probing for a phys_base up to 32MB, in 1MB steps.
> >> 
> >> Alas, the QEMU notes are not present in the KDUMP-format vmcores that
> >> QEMU produces (they cannot be),
> > 
> > Why? Since KDUMP format version 4, the complete ELF notes can be stored
> > in the file (see offset_note, size_note fields in the sub-header).
> > 
> 
> Yes, the QEMU notes is present in kdump-compressed format. But
> phys_base cannot be calculated only from qemu-side. We cannot do more
> than the efforts crash utility does for workaround. So, the phys_base
> value in kdump-sub header is now designed to have 0 now.
> 
> Anyway, phys_base is kernel information. To make it available for qemu
> side, there's need to prepare a mechanism for qemu to have any access
> to it.
> 
> One ad-hoc but simple way is to put phys_base value as part of
> VMCOREINFO note information on kernel.
> 
> Although there has already been a similar one in VMCOREINFO, like
> 
> arch/x86/kernel/
> ==
> void arch_crash_save_vmcoreinfo(void)
> {
>         VMCOREINFO_SYMBOL(phys_base); <---- This
>         VMCOREINFO_SYMBOL(init_level4_pgt);
> 
> ...
> ==
> 
> this is meangless, because this value is a virtual address assigned to
> phys_base symbol. To refer to the value of phys_base itself, we need
> the phys_base value we are about to get now.
> 
> So, instead, if we change this to save the value, not value of symbol
> phys_base, we can get phys_base from the VMCOREINFO.
> 
> The VMCOREINFO consists simply of string. So it's easy to search
> vmcore for it e.g. using strings and grep like this:
> 
> $ strings vmcore-3.10.0-121.el7.x86_64 | grep -E ".*VMCOREINFO.*" -A 100
> VMCOREINFO
> OSRELEASE=3.10.0-121.el7.x86_64
> PAGESIZE=4096
> ...
> SYMBOL(phys_base)=ffffffff818e5010  <-- though this is address of phys_base
> now...
> SYMBOL(init_level4_pgt)=ffffffff818de000
> SYMBOL(node_data)=ffffffff819f1cc0
> LENGTH(node_data)=1024
> CRASHTIME=1399460394
> ...
> 
> This should also be useful to get phys_base of 2nd kernel, which is
> inherently relocated kernel from a vmcore generated using qemu dump.
> 
> This is far from well-designed from qemu's point of view, but it would
> be manually easier to get phys_base than now.
> 
> Obviously, the VMCOREINFO is available only if CONFIG_KEXEC is
> enabled. Other users cannot use this.
> 
> --
> Thanks.
> HATAYAMA, Daisuke

I agree that the actual value of phys_base should be included in the vmcoreinfo.

However, it won't help in this case because the vmcoreinfo data is not
copied into the compressed dumpfile header.  The offset_vmcoreinfo and
size_vmcoreinfo fields are zero.  

Here's an example header dump of a QEMU-generated dumpfile:
  
  crash> help -n
  makedumpfile header:
            signature: "makedumpfile"
                 type: 1
              version: 1
        all_flat_data:
            num_array: 18695
                array: 7f484b760010
            file_size: 0
  
  diskdump_data: 
            filename: vmcore.ovmf.rhel7.kdump-snappy
               flags: c6 (KDUMP_CMPRS_LOCAL|ERROR_EXCLUDED|LZO_SUPPORTED|SNAPPY_SUPPORTED) [FLAT]
                 dfd: 3
                 ofp: 3e441b1260
        machine_type: 62 (EM_X86_64)
  
              header: 1a68fe0
             signature: "KDUMP   "
        header_version: 6
               utsname:
                 sysname: 
                nodename: 
                 release: 
                 version: 
                 machine: x86_64
              domainname: 
             timestamp:
                  tv_sec: 0
                 tv_usec: 0
                status: 4 (DUMP_DH_COMPRESSED_SNAPPY)
            block_size: 4096
          sub_hdr_size: 1
         bitmap_blocks: 76
             max_mapnr: 1245184
      total_ram_blocks: 0
         device_blocks: 0
        written_blocks: 0
           current_cpu: 0
               nr_cpus: 4
        tasks[nr_cpus]: 0
                        0
                        0
                        0
  
          sub_header: 0 (n/a)
  
    sub_header_kdump: 1a69ff0 
             phys_base: 0
            dump_level: 1 (0x1) (DUMP_EXCLUDE_ZERO)
                 split: 0
             start_pfn: (unused)
               end_pfn: (unused)
     offset_vmcoreinfo: 0 (0x0)
       size_vmcoreinfo: 0 (0x0)
           offset_note: 4200 (0x1068)
             size_note: 3232 (0xca0)
    num_prstatus_notes: 4
             notes_buf: 1a6b000
              notes[0]: 1a6b000
              notes[1]: 1a6b164
              notes[2]: 1a6b2c8
              notes[3]: 1a6b42c
    NT_PRSTATUS_offset: 1068
                        11cc
                        1330
                        1494
      offset_eraseinfo: 0 (0x0)
        size_eraseinfo: 0 (0x0)
          start_pfn_64: (unused)
            end_pfn_64: (unused)
          max_mapnr_64: 1245184 (0x130000)
  
         data_offset: 4e000
          block_size: 4096
         block_shift: 12
              bitmap: 7f484b713010
          bitmap_len: 311296
           max_mapnr: 1245184 (0x130000)
     dumpable_bitmap: 7f484b6c6010
                byte: 0
                 bit: 0
     compressed_page: 1a8c660
           curbufptr: 1a7f650
...  

Note that QEMU does add self-generated register dumps above, but the special
"QEMU" note that is added to ELF kdumps is not included. 

Also note that the kernel version information is also left zero-filled.

In any case, if either a QEMU note or a diskdump.data flag were added, I would
be more than happy.

Dave



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux